Short-Circuit Protection (SCP) and Over-Current Protection (OCP) are
now implemented in the driver: document the interrupts.
This also fixes wrong documentation about the SCP interrupt for LAB.
Signed-off-by: AngeloGioacchino Del Regno
<angelogioacchino.delre...@somainline.org>
Reviewed-by: Bjorn Andersson <bjorn.anders...@linaro.org>
---
.../regulator/qcom-labibb-regulator.yaml | 20 +++++++++++--------
1 file changed, 12 insertions(+), 8 deletions(-)
diff --git
a/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml
b/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml
index 7a507692f1ba..cf784bd1f5e5 100644
--- a/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml
@@ -29,9 +29,10 @@ properties:
default: 200
interrupts:
- maxItems: 1
+ minItems: 1
+ maxItems: 2
description:
- Short-circuit interrupt for lab.
+ Short-circuit and over-current interrupts for lab.
required:
- interrupts
@@ -47,9 +48,10 @@ properties:
default: 300
interrupts:
- maxItems: 1
+ minItems: 1
+ maxItems: 2
description:
- Short-circuit interrupt for lab.
+ Short-circuit and over-current interrupts for ibb.
required:
- interrupts
@@ -67,13 +69,15 @@ examples:
compatible = "qcom,pmi8998-lab-ibb";
lab {
- interrupts = <0x3 0x0 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "sc-err";
+ interrupts = <0x3 0xde 0x1 IRQ_TYPE_EDGE_RISING>,
+ <0x3 0xde 0x0 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "sc-err", "ocp";
};
ibb {
- interrupts = <0x3 0x2 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "sc-err";
+ interrupts = <0x3 0xdc 0x2 IRQ_TYPE_EDGE_RISING>,
+ <0x3 0xdc 0x0 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "sc-err", "ocp";
};
};
--
2.30.0
