Follow the gpio-hog bindings and use otg-hog as node name.
Signed-off-by: Luca Weiss <l...@z3ntu.xyz>
---
arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
b/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
index 4aaae8537a3f..06549051be50 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -328,7 +328,7 @@ wlan_regulator_pin: wl-reg-active-state {
power-source = <PM8941_GPIO_S3>;
};
- otg {
+ otg-hog {
gpio-hog;
gpios = <35 GPIO_ACTIVE_HIGH>;
output-high;
--
2.44.0
