AMD-Xilinx Versal platform is successor of ZynqMP platform.
Real-time Processing Unit R5 cluster IP on Versal is same as
of ZynqMP Platform. Power-domains ids for Versal platform is
different than ZynqMP.
AMD-Xilinx Versal-NET platform is successor of Versal platform.
Versal-NET Real-Time Processing Unit has two clusters and each
cluster contains dual core ARM Cortex-R52 processors. Each R52
core is assigned 128KB of TCM memory.
Signed-off-by: Tanmay Shah <tanmay.s...@amd.com>
---
drivers/remoteproc/xlnx_r5_remoteproc.c | 53 ++++++++-----------------
1 file changed, 17 insertions(+), 36 deletions(-)
diff --git a/drivers/remoteproc/xlnx_r5_remoteproc.c
b/drivers/remoteproc/xlnx_r5_remoteproc.c
index 7b1c12108bff..a6d8ac7394e7 100644
--- a/drivers/remoteproc/xlnx_r5_remoteproc.c
+++ b/drivers/remoteproc/xlnx_r5_remoteproc.c
@@ -300,36 +300,6 @@ static void zynqmp_r5_rproc_kick(struct rproc *rproc, int
vqid)
dev_warn(dev, "failed to send message\n");
}
-/*
- * zynqmp_r5_set_mode()
- *
- * set RPU cluster and TCM operation mode
- *
- * @r5_core: pointer to zynqmp_r5_core type object
- * @fw_reg_val: value expected by firmware to configure RPU cluster mode
- * @tcm_mode: value expected by fw to configure TCM mode (lockstep or split)
- *
- * Return: 0 for success and < 0 for failure
- */
-static int zynqmp_r5_set_mode(struct zynqmp_r5_core *r5_core,
- enum rpu_oper_mode fw_reg_val,
- enum rpu_tcm_comb tcm_mode)
-{
- int ret;
-
- ret = zynqmp_pm_set_rpu_mode(r5_core->pm_domain_id, fw_reg_val);
- if (ret < 0) {
- dev_err(r5_core->dev, "failed to set RPU mode\n");
- return ret;
- }
-
- ret = zynqmp_pm_set_tcm_config(r5_core->pm_domain_id, tcm_mode);
- if (ret < 0)
- dev_err(r5_core->dev, "failed to configure TCM\n");
-
- return ret;
-}
-
/*
* zynqmp_r5_rproc_start()
* @rproc: single R5 core's corresponding rproc instance
@@ -941,7 +911,7 @@ static int zynqmp_r5_core_init(struct zynqmp_r5_cluster
*cluster,
/* Maintain backward compatibility for zynqmp by using hardcode TCM
address. */
if (of_find_property(r5_core->np, "reg", NULL))
ret = zynqmp_r5_get_tcm_node_from_dt(cluster);
- else
+ else if (device_is_compatible(dev, "xlnx,zynqmp-r5fss"))
ret = zynqmp_r5_get_tcm_node(cluster);
if (ret) {
@@ -960,12 +930,21 @@ static int zynqmp_r5_core_init(struct zynqmp_r5_cluster
*cluster,
return ret;
}
- ret = zynqmp_r5_set_mode(r5_core, fw_reg_val, tcm_mode);
- if (ret) {
- dev_err(dev, "failed to set r5 cluster mode %d, err
%d\n",
- cluster->mode, ret);
+ ret = zynqmp_pm_set_rpu_mode(r5_core->pm_domain_id, fw_reg_val);
+ if (ret < 0) {
+ dev_err(r5_core->dev, "failed to set RPU mode\n");
return ret;
}
+
+ if (of_find_property(dev_of_node(dev), "xlnx,tcm-mode", NULL) ||
+ device_is_compatible(dev, "xlnx,zynqmp-r5fss")) {
+ ret = zynqmp_pm_set_tcm_config(r5_core->pm_domain_id,
+ tcm_mode);
+ if (ret < 0) {
+ dev_err(r5_core->dev, "failed to configure
TCM\n");
+ return ret;
+ }
+ }
}
return 0;
@@ -1022,7 +1001,7 @@ static int zynqmp_r5_cluster_init(struct
zynqmp_r5_cluster *cluster)
ret = of_property_read_u32(dev_node, "xlnx,tcm-mode", (u32
*)&tcm_mode);
if (ret)
return ret;
- } else {
+ } else if (device_is_compatible(dev, "xlnx,zynqmp-r5fss")) {
if (cluster_mode == LOCKSTEP_MODE)
tcm_mode = PM_RPU_TCM_COMB;
else
@@ -1212,6 +1191,8 @@ static int zynqmp_r5_remoteproc_probe(struct
platform_device *pdev)
/* Match table for OF platform binding */
static const struct of_device_id zynqmp_r5_remoteproc_match[] = {
+ { .compatible = "xlnx,versal-net-r52fss", },
+ { .compatible = "xlnx,versal-r5fss", },
{ .compatible = "xlnx,zynqmp-r5fss", },
{ /* end of list */ },
};
base-commit: 912ebe48bec5927e2049e91b0e8a9cc682a709d2
--
2.25.1
