I run a Debian unstable system here and recently did a
dist-upgrade--actually the Synaptic equivalent. In the process, I got a
new kernel (2.6.12). On reboot, I noticed alot of errors referencing
/dev/hdb. This is not the oldest of the 3 hard drives I have in this
machine, but it's also not very new (ca. 4 years old). All drives are on
the built-in IDE channels. I'm wondering if the output may be telling me
the hardware is on its way south. I include relevant dmesg output below.
Any input or advice on this anyone?
NET: Registered protocol family 1
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: ST310215A, ATA DISK drive
hdb: ST320413A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: IBM-DPTA-371360, ATA DISK drive
hdd: CD-RW 32X10X40, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: max request size: 128KiB
hda: 19541088 sectors (10005 MB) w/2048KiB Cache, CHS=19386/16/63, UDMA(33)
hda: cache flushes not supported
/dev/ide/host0/bus0/target0/lun0: p1
hdb: max request size: 128KiB
hdb: Host Protected Area detected.
current capacity is 39102336 sectors (20020 MB)
native capacity is 39102337 sectors (20020 MB)
hdb: Host Protected Area disabled.
hdb: 39102337 sectors (20020 MB) w/1024KiB Cache, CHS=38792/16/63, UDMA(33)
hdb: cache flushes not supported
/dev/ide/host0/bus0/target1/lun0: p1
hdc: max request size: 128KiB
hdc: 26712000 sectors (13676 MB) w/1961KiB Cache, CHS=26500/16/63, UDMA(33)
hdc: cache flushes not supported
/dev/ide/host0/bus1/target0/lun0: p1 p2
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: dma_intr: error=0x10 { SectorIdNotFound }, LBAsect=39102336,
sector=39102336
ide: failed opcode was: unknown
hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: dma_intr: error=0x10 { SectorIdNotFound }, LBAsect=39102336,
sector=39102336
ide: failed opcode was: unknown
hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: dma_intr: error=0x10 { SectorIdNotFound }, LBAsect=39102336,
sector=39102336
ide: failed opcode was: unknown
hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: dma_intr: error=0x10 { SectorIdNotFound }, LBAsect=39102336,
sector=39102336
ide: failed opcode was: unknown
hda: DMA disabled
hdb: DMA disabled
ide0: reset: success
hdb: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdb: task_in_intr: error=0x10 { SectorIdNotFound }, LBAsect=39167615,
sector=39102336
ide: failed opcode was: unknown
hdb: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdb: task_in_intr: error=0x10 { SectorIdNotFound }, LBAsect=39167615,
sector=39102336
ide: failed opcode was: unknown
hdb: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdb: task_in_intr: error=0x10 { SectorIdNotFound }, LBAsect=39167615,
sector=39102336
ide: failed opcode was: unknown
hdb: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdb: task_in_intr: error=0x10 { SectorIdNotFound }, LBAsect=39167615,
sector=39102336
ide: failed opcode was: unknown
ide0: reset: success
hdb: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdb: task_in_intr: error=0x10 { SectorIdNotFound }, LBAsect=39167615,
sector=39102336
ide: failed opcode was: unknown
end_request: I/O error, dev hdb, sector 39102336
Buffer I/O error on device hdb, logical block 39102336
hdb: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdb: task_in_intr: error=0x10 { SectorIdNotFound }, LBAsect=39167615,
sector=39102336
ide: failed opcode was: unknown
hdb: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdb: task_in_intr: error=0x10 { SectorIdNotFound }, LBAsect=39167615,
sector=39102336
ide: failed opcode was: unknown
hdb: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdb: task_in_intr: error=0x10 { SectorIdNotFound }, LBAsect=39167615,
sector=39102336
ide: failed opcode was: unknown
hdb: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdb: task_in_intr: error=0x10 { SectorIdNotFound }, LBAsect=39167615,
sector=39102336
ide: failed opcode was: unknown
ide0: reset: success
hdb: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdb: task_in_intr: error=0x10 { SectorIdNotFound }, LBAsect=39167615,
sector=39102336
ide: failed opcode was: unknown
hdb: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdb: task_in_intr: error=0x10 { SectorIdNotFound }, LBAsect=39167615,
sector=39102336
ide: failed opcode was: unknown
hdb: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdb: task_in_intr: error=0x10 { SectorIdNotFound }, LBAsect=39167615,
sector=39102336
ide: failed opcode was: unknown
hdb: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdb: task_in_intr: error=0x10 { SectorIdNotFound }, LBAsect=39167615,
sector=39102336
ide: failed opcode was: unknown
ide0: reset: success
hdb: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdb: task_in_intr: error=0x10 { SectorIdNotFound }, LBAsect=39167615,
sector=39102336
ide: failed opcode was: unknown
end_request: I/O error, dev hdb, sector 39102336
Buffer I/O error on device hdb, logical block 39102336
Adding 781160k swap on /dev/hdc1. Priority:-1 extents:1
EXT3 FS on hda1, internal journal
hdd: ATAPI 40X CD-ROM CD-R/RW drive, 8192kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
SCSI subsystem initialized
cdrom: open failed.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdc2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Thanks, James
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
