From: Lauri Leukkunen <lauri.leukku...@nokia.com>
Introduce a driver for the Texas Instruments TSC2005 touchscreen
controller (http://focus.ti.com/docs/prod/folders/print/tsc2005.html).
The patch is based on a driver by Lauri Leukkunen, with modifications
by David Brownell, Phil Carmody, Imre Deak, Hiroshi DOYU, Ari Kauppi,
Tony Lindgren, Jarkko Nikula, Eero Nurkkala and Roman Tereshonkov.
Signed-off-by: Lauri Leukkunen <lauri.leukku...@nokia.com>
[aaro.koski...@nokia.com: patch description, rebasing & cleanup]
Signed-off-by: Aaro Koskinen <aaro.koski...@nokia.com>
Cc: David Brownell <dbrown...@users.sourceforge.net>
Cc: Phil Carmody <ext-phil.2.carm...@nokia.com>
Cc: Imre Deak <imre.d...@nokia.com>
Cc: Hiroshi DOYU <hiroshi.d...@nokia.com>
Cc: Ari Kauppi <ext-ari.kau...@nokia.com>
Cc: Tony Lindgren <t...@atomide.com>
Cc: Jarkko Nikula <jhnik...@gmail.com>
Cc: Eero Nurkkala <ext-eero.nurkk...@nokia.com>
Cc: Roman Tereshonkov <roman.tereshon...@nokia.com>
---
v4: Refreshed the patches against the current mainline
(13bd8e4673d527a9e48f41956b11d391e7c2cfe0). No other changes as no
comments were received.
The v3 has some major modifications. I have tried to clean up and simplify
the driver. All action takes place in thread context, SPI transfers are
synchronous, the spinlock is removed, and there are no long sections
with interrupts disabled. The driver should be now SMP safe.
Also the following review comments are addressed:
- Use del_timer_sync() instead of del_timer().
- Use mod_timer() always instead of add_timer().
- Use attribute_group.
- Delete filtering and averaging which belong to upper layers.
- Delete pen_down sysfs file.
The previous version and comments can be seen here:
http://marc.info/?t=125734115600004&r=1&w=2
drivers/input/touchscreen/Kconfig | 11 +
drivers/input/touchscreen/Makefile | 1 +
drivers/input/touchscreen/tsc2005.c | 678 +++++++++++++++++++++++++++++++++++
include/linux/spi/tsc2005.h | 41 +++
4 files changed, 731 insertions(+), 0 deletions(-)
create mode 100644 drivers/input/touchscreen/tsc2005.c
create mode 100644 include/linux/spi/tsc2005.h
diff --git a/drivers/input/touchscreen/Kconfig
b/drivers/input/touchscreen/Kconfig
index dfafc76..72c1797 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -548,6 +548,17 @@ config TOUCHSCREEN_TOUCHIT213
To compile this driver as a module, choose M here: the
module will be called touchit213.
+config TOUCHSCREEN_TSC2005
+ tristate "TSC2005 based touchscreens"
+ depends on SPI_MASTER
+ help
+ Say Y here if you have a TSC2005 based touchscreen.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tsc2005.
+
config TOUCHSCREEN_TSC2007
tristate "TSC2007 based touchscreens"
depends on I2C
diff --git a/drivers/input/touchscreen/Makefile
b/drivers/input/touchscreen/Makefile
index d61a3b4..61fa8b5 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -33,6 +33,7 @@ obj-$(CONFIG_TOUCHSCREEN_S3C2410) += s3c2410_ts.o
obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213) += touchit213.o
obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT) += touchright.o
obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN) += touchwin.o
+obj-$(CONFIG_TOUCHSCREEN_TSC2005) += tsc2005.o
obj-$(CONFIG_TOUCHSCREEN_TSC2007) += tsc2007.o
obj-$(CONFIG_TOUCHSCREEN_UCB1400) += ucb1400_ts.o
obj-$(CONFIG_TOUCHSCREEN_WACOM_W8001) += wacom_w8001.o
diff --git a/drivers/input/touchscreen/tsc2005.c
b/drivers/input/touchscreen/tsc2005.c
new file mode 100644
index 0000000..27ee361
--- /dev/null
+++ b/drivers/input/touchscreen/tsc2005.c
@@ -0,0 +1,678 @@
+/*
+ * TSC2005 touchscreen driver
+ *
+ * Copyright (C) 2006-2010 Nokia Corporation
+ *
+ * Author: Lauri Leukkunen <lauri.leukku...@nokia.com>
+ * based on TSC2301 driver by Klaus K. Pedersen <klaus.k.peder...@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/tsc2005.h>
+
+/*
+ * The touchscreen interface operates as follows:
+ *
+ * 1) Pen is pressed against the touchscreen.
+ * 2) TSC2005 performs AD conversion.
+ * 3) After the conversion is done TSC2005 drives DAV line down.
+ * 4) GPIO IRQ is received and tsc2005_irq_thread() is scheduled.
+ * 5) tsc2005_irq_thread() queues up an spi transfer to fetch the x, y, z1, z2
+ * values.
+ * 6) tsc2005_irq_thread() reports coordinates to input layer and sets up
+ * tsc2005_penup_timer() to be called after TSC2005_PENUP_TIME_MS (40ms).
+ * 7) When the penup timer expires, there have not been touch or DAV interrupts
+ * during the last 40ms which means the pen has been lifted.
+ *
+ * ESD recovery via a hardware reset is done if the TSC2005 doesn't respond
+ * after a configurable period (in ms) of activity. If esd_timeout is 0, the
+ * watchdog is disabled.
+ */
+
+/* control byte 1 */
+#define TSC2005_CMD 0x80
+#define TSC2005_CMD_NORMAL 0x00
+#define TSC2005_CMD_STOP 0x01
+#define TSC2005_CMD_12BIT 0x04
+
+/* control byte 0 */
+#define TSC2005_REG_READ 0x0001
+#define TSC2005_REG_PND0 0x0002
+#define TSC2005_REG_X 0x0000
+#define TSC2005_REG_Y 0x0008
+#define TSC2005_REG_Z1 0x0010
+#define TSC2005_REG_Z2 0x0018
+#define TSC2005_REG_TEMP_HIGH 0x0050
+#define TSC2005_REG_CFR0 0x0060
+#define TSC2005_REG_CFR1 0x0068
+#define TSC2005_REG_CFR2 0x0070
+
+/* configuration register 0 */
+#define TSC2005_CFR0_PRECHARGE_276US 0x0040
+#define TSC2005_CFR0_STABTIME_1MS 0x0300
+#define TSC2005_CFR0_CLOCK_1MHZ 0x1000
+#define TSC2005_CFR0_RESOLUTION12 0x2000
+#define TSC2005_CFR0_PENMODE 0x8000
+#define TSC2005_CFR0_INITVALUE (TSC2005_CFR0_STABTIME_1MS | \
+ TSC2005_CFR0_CLOCK_1MHZ | \
+ TSC2005_CFR0_RESOLUTION12 | \
+ TSC2005_CFR0_PRECHARGE_276US | \
+ TSC2005_CFR0_PENMODE)
+
+/* bits common to both read and write of configuration register 0 */
+#define TSC2005_CFR0_RW_MASK 0x3fff
+
+/* configuration register 1 */
+#define TSC2005_CFR1_BATCHDELAY_4MS 0x0003
+#define TSC2005_CFR1_INITVALUE TSC2005_CFR1_BATCHDELAY_4MS
+
+/* configuration register 2 */
+#define TSC2005_CFR2_MAVE_Z 0x0004
+#define TSC2005_CFR2_MAVE_Y 0x0008
+#define TSC2005_CFR2_MAVE_X 0x0010
+#define TSC2005_CFR2_AVG_7 0x0800
+#define TSC2005_CFR2_MEDIUM_15 0x3000
+#define TSC2005_CFR2_INITVALUE (TSC2005_CFR2_MAVE_X | \
+ TSC2005_CFR2_MAVE_Y | \
+ TSC2005_CFR2_MAVE_Z | \
+ TSC2005_CFR2_MEDIUM_15 | \
+ TSC2005_CFR2_AVG_7)
+
+#define MAX_12BIT 0xfff
+#define TSC2005_SPI_MAX_SPEED_HZ 10000000
+#define TSC2005_PENUP_TIME_MS 40
+
+struct tsc2005_spi_rd {
+ struct spi_transfer spi_xfer;
+ u32 spi_tx;
+ u32 spi_rx;
+};
+
+struct tsc2005 {
+ struct spi_device *spi;
+
+ struct spi_message spi_read_msg;
+ struct tsc2005_spi_rd spi_x;
+ struct tsc2005_spi_rd spi_y;
+ struct tsc2005_spi_rd spi_z1;
+ struct tsc2005_spi_rd spi_z2;
+
+ struct input_dev *idev;
+ char phys[32];
+
+ struct mutex mutex;
+
+ struct timer_list penup_timer;
+ struct work_struct penup_work;
+
+ unsigned int esd_timeout;
+ struct timer_list esd_timer;
+ struct work_struct esd_work;
+
+ unsigned int x_plate_ohm;
+
+ bool disabled;
+ unsigned int disable_depth;
+
+ void (*set_reset)(bool enable);
+};
+
+static void tsc2005_cmd(struct tsc2005 *ts, u8 cmd)
+{
+ u8 tx;
+ struct spi_message msg;
+ struct spi_transfer xfer = { 0 };
+
+ tx = TSC2005_CMD | TSC2005_CMD_12BIT | cmd;
+
+ xfer.tx_buf = &tx;
+ xfer.rx_buf = NULL;
+ xfer.len = 1;
+ xfer.bits_per_word = 8;
+
+ spi_message_init(&msg);
+ spi_message_add_tail(&xfer, &msg);
+ spi_sync(ts->spi, &msg);
+}
+
+static void tsc2005_write(struct tsc2005 *ts, u8 reg, u16 value)
+{
+ u32 tx;
+ struct spi_message msg;
+ struct spi_transfer xfer = { 0 };
+
+ tx = (reg | TSC2005_REG_PND0) << 16;
+ tx |= value;
+
+ xfer.tx_buf = &tx;
+ xfer.rx_buf = NULL;
+ xfer.len = 4;
+ xfer.bits_per_word = 24;
+
+ spi_message_init(&msg);
+ spi_message_add_tail(&xfer, &msg);
+ spi_sync(ts->spi, &msg);
+}
+
+static void tsc2005_setup_read(struct tsc2005_spi_rd *rd, u8 reg, bool last)
+{
+ rd->spi_tx = (reg | TSC2005_REG_READ) << 16;
+ rd->spi_xfer.tx_buf = &rd->spi_tx;
+ rd->spi_xfer.rx_buf = &rd->spi_rx;
+ rd->spi_xfer.len = 4;
+ rd->spi_xfer.bits_per_word = 24;
+ rd->spi_xfer.cs_change = !last;
+}
+
+static void tsc2005_read(struct tsc2005 *ts, u8 reg, u16 *value)
+{
+ struct spi_message msg;
+ struct tsc2005_spi_rd spi_rd = { { 0 }, 0, 0 };
+
+ tsc2005_setup_read(&spi_rd, reg, 1);
+
+ spi_message_init(&msg);
+ spi_message_add_tail(&spi_rd.spi_xfer, &msg);
+ spi_sync(ts->spi, &msg);
+ *value = spi_rd.spi_rx;
+}
+
+static void tsc2005_update_pen_state(struct tsc2005 *ts,
+ int x, int y, int pressure)
+{
+ if (pressure) {
+ input_report_abs(ts->idev, ABS_X, x);
+ input_report_abs(ts->idev, ABS_Y, y);
+ }
+ input_report_abs(ts->idev, ABS_PRESSURE, pressure);
+ input_report_key(ts->idev, BTN_TOUCH, !!pressure);
+ input_sync(ts->idev);
+ dev_dbg(&ts->spi->dev, "point(%4d,%4d), pressure (%4d)\n", x, y,
+ pressure);
+}
+
+static irqreturn_t tsc2005_irq_handler(int irq, void *dev_id)
+{
+ struct tsc2005 *ts = dev_id;
+
+ /* update the penup timer only if it's pending */
+ mod_timer_pending(&ts->penup_timer,
+ jiffies + msecs_to_jiffies(TSC2005_PENUP_TIME_MS));
+
+ return IRQ_WAKE_THREAD;
+}
+
+static irqreturn_t tsc2005_irq_thread(int irq, void *_ts)
+{
+ struct tsc2005 *ts = _ts;
+ unsigned int pressure;
+ u32 x;
+ u32 y;
+ u32 z1;
+ u32 z2;
+
+ mutex_lock(&ts->mutex);
+
+ if (unlikely(ts->disable_depth))
+ goto out;
+
+ /* read the coordinates */
+ spi_sync(ts->spi, &ts->spi_read_msg);
+ x = ts->spi_x.spi_rx;
+ y = ts->spi_y.spi_rx;
+ z1 = ts->spi_z1.spi_rx;
+ z2 = ts->spi_z2.spi_rx;
+
+ /* validate position */
+ if (unlikely(x > MAX_12BIT || y > MAX_12BIT))
+ goto out;
+
+ /* skip coords if the pressure components are out of range */
+ if (unlikely(z1 == 0 || z2 > MAX_12BIT || z1 >= z2))
+ goto out;
+
+ /* compute touch pressure resistance using equation #1 */
+ pressure = x * (z2 - z1) / z1;
+ pressure = pressure * ts->x_plate_ohm / 4096;
+ if (unlikely(pressure > MAX_12BIT))
+ goto out;
+
+ tsc2005_update_pen_state(ts, x, y, pressure);
+
+ /* set the penup timer */
+ mod_timer(&ts->penup_timer,
+ jiffies + msecs_to_jiffies(TSC2005_PENUP_TIME_MS));
+
+ if (!ts->esd_timeout)
+ goto out;
+
+ /* update the watchdog timer */
+ mod_timer(&ts->esd_timer,
+ round_jiffies(jiffies + msecs_to_jiffies(ts->esd_timeout)));
+
+out:
+ mutex_unlock(&ts->mutex);
+ return IRQ_HANDLED;
+}
+
+static void tsc2005_penup_timer(unsigned long data)
+{
+ struct tsc2005 *ts = (struct tsc2005 *)data;
+
+ schedule_work(&ts->penup_work);
+}
+
+static void tsc2005_penup_work(struct work_struct *work)
+{
+ struct tsc2005 *ts = container_of(work, struct tsc2005, penup_work);
+
+ mutex_lock(&ts->mutex);
+ tsc2005_update_pen_state(ts, 0, 0, 0);
+ mutex_unlock(&ts->mutex);
+}
+
+static void tsc2005_start_scan(struct tsc2005 *ts)
+{
+ tsc2005_write(ts, TSC2005_REG_CFR0, TSC2005_CFR0_INITVALUE);
+ tsc2005_write(ts, TSC2005_REG_CFR1, TSC2005_CFR1_INITVALUE);
+ tsc2005_write(ts, TSC2005_REG_CFR2, TSC2005_CFR2_INITVALUE);
+ tsc2005_cmd(ts, TSC2005_CMD_NORMAL);
+}
+
+static void tsc2005_stop_scan(struct tsc2005 *ts)
+{
+ tsc2005_cmd(ts, TSC2005_CMD_STOP);
+}
+
+/* must be called with mutex held */
+static void tsc2005_disable(struct tsc2005 *ts)
+{
+ if (ts->disable_depth++ != 0)
+ return;
+ disable_irq(ts->spi->irq);
+ if (ts->esd_timeout)
+ del_timer_sync(&ts->esd_timer);
+ del_timer_sync(&ts->penup_timer);
+ tsc2005_stop_scan(ts);
+}
+
+/* must be called with mutex held */
+static void tsc2005_enable(struct tsc2005 *ts)
+{
+ if (--ts->disable_depth != 0)
+ return;
+ tsc2005_start_scan(ts);
+ enable_irq(ts->spi->irq);
+ if (!ts->esd_timeout)
+ return;
+ mod_timer(&ts->esd_timer,
+ round_jiffies(jiffies + msecs_to_jiffies(ts->esd_timeout)));
+}
+
+static ssize_t tsc2005_disable_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct tsc2005 *ts = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%u\n", ts->disabled);
+}
+
+static ssize_t tsc2005_disable_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct tsc2005 *ts = dev_get_drvdata(dev);
+ unsigned long res;
+ int i;
+
+ if (strict_strtoul(buf, 10, &res) < 0)
+ return -EINVAL;
+ i = res ? 1 : 0;
+
+ mutex_lock(&ts->mutex);
+ if (i == ts->disabled)
+ goto out;
+ ts->disabled = i;
+ if (i)
+ tsc2005_disable(ts);
+ else
+ tsc2005_enable(ts);
+out:
+ mutex_unlock(&ts->mutex);
+ return count;
+}
+static DEVICE_ATTR(disable, 0664, tsc2005_disable_show, tsc2005_disable_store);
+
+static ssize_t tsc2005_selftest_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct tsc2005 *ts = dev_get_drvdata(dev);
+ u16 temp_high;
+ u16 temp_high_orig;
+ u16 temp_high_test;
+ unsigned int result;
+
+ if (!ts->set_reset) {
+ dev_warn(&ts->spi->dev,
+ "unable to selftest: no reset function\n");
+ result = 0;
+ goto out;
+ }
+
+ mutex_lock(&ts->mutex);
+
+ /*
+ * Test TSC2005 communications via temp high register.
+ */
+ tsc2005_disable(ts);
+ result = 1;
+ tsc2005_read(ts, TSC2005_REG_TEMP_HIGH, &temp_high_orig);
+ temp_high_test = (temp_high_orig - 1) & MAX_12BIT;
+ tsc2005_write(ts, TSC2005_REG_TEMP_HIGH, temp_high_test);
+ tsc2005_read(ts, TSC2005_REG_TEMP_HIGH, &temp_high);
+ if (temp_high != temp_high_test) {
+ dev_warn(dev, "selftest failed: %d != %d\n",
+ temp_high, temp_high_test);
+ result = 0;
+ }
+
+ /* hardware reset */
+ ts->set_reset(0);
+ msleep(1); /* only 10us required */
+ ts->set_reset(1);
+ tsc2005_enable(ts);
+
+ /* test that the reset really happened */
+ tsc2005_read(ts, TSC2005_REG_TEMP_HIGH, &temp_high);
+ if (temp_high != temp_high_orig) {
+ dev_warn(dev, "selftest failed after reset: %d != %d\n",
+ temp_high, temp_high_orig);
+ result = 0;
+ }
+
+ mutex_unlock(&ts->mutex);
+
+out:
+ return sprintf(buf, "%u\n", result);
+}
+static DEVICE_ATTR(selftest, S_IRUGO, tsc2005_selftest_show, NULL);
+
+static void tsc2005_esd_timer(unsigned long data)
+{
+ struct tsc2005 *ts = (struct tsc2005 *)data;
+
+ schedule_work(&ts->esd_work);
+}
+
+static void tsc2005_esd_work(struct work_struct *work)
+{
+ struct tsc2005 *ts = container_of(work, struct tsc2005, esd_work);
+ u16 r;
+
+ mutex_lock(&ts->mutex);
+
+ if (ts->disable_depth)
+ goto out;
+
+ /*
+ * If we cannot read our known value from configuration register 0 then
+ * reset the controller as if from power-up and start scanning again.
+ */
+ tsc2005_read(ts, TSC2005_REG_CFR0, &r);
+ if ((r ^ TSC2005_CFR0_INITVALUE) & TSC2005_CFR0_RW_MASK) {
+ dev_info(&ts->spi->dev, "TSC2005 not responding - resetting\n");
+ ts->set_reset(0);
+ msleep(1); /* only 10us required */
+ ts->set_reset(1);
+ tsc2005_start_scan(ts);
+ }
+
+ /* re-arm the watchdog */
+ mod_timer(&ts->esd_timer,
+ round_jiffies(jiffies + msecs_to_jiffies(ts->esd_timeout)));
+
+out:
+ mutex_unlock(&ts->mutex);
+}
+
+static void __devinit tsc2005_setup_spi_xfer(struct tsc2005 *ts)
+{
+ tsc2005_setup_read(&ts->spi_x, TSC2005_REG_X, 0);
+ tsc2005_setup_read(&ts->spi_y, TSC2005_REG_Y, 0);
+ tsc2005_setup_read(&ts->spi_z1, TSC2005_REG_Z1, 0);
+ tsc2005_setup_read(&ts->spi_z2, TSC2005_REG_Z2, 1);
+
+ spi_message_init(&ts->spi_read_msg);
+ spi_message_add_tail(&ts->spi_x.spi_xfer, &ts->spi_read_msg);
+ spi_message_add_tail(&ts->spi_y.spi_xfer, &ts->spi_read_msg);
+ spi_message_add_tail(&ts->spi_z1.spi_xfer, &ts->spi_read_msg);
+ spi_message_add_tail(&ts->spi_z2.spi_xfer, &ts->spi_read_msg);
+}
+
+static struct attribute *tsc2005_attrs[] = {
+ &dev_attr_disable.attr,
+ &dev_attr_selftest.attr,
+ NULL
+};
+
+static struct attribute_group tsc2005_attr_group = {
+ .attrs = tsc2005_attrs,
+};
+
+static int __devinit tsc2005_setup(struct tsc2005 *ts,
+ struct tsc2005_platform_data *pdata)
+{
+ int r;
+ int fudge_x;
+ int fudge_y;
+ int fudge_p;
+ int p_max;
+ int x_max;
+ int y_max;
+
+ mutex_init(&ts->mutex);
+
+ tsc2005_setup_spi_xfer(ts);
+
+ init_timer(&ts->penup_timer);
+ setup_timer(&ts->penup_timer, tsc2005_penup_timer, (unsigned long)ts);
+ INIT_WORK(&ts->penup_work, tsc2005_penup_work);
+
+ fudge_x = pdata->ts_x_fudge ? : 0;
+ fudge_y = pdata->ts_y_fudge ? : 0;
+ fudge_p = pdata->ts_pressure_fudge ? : 0;
+ x_max = pdata->ts_x_max ? : MAX_12BIT;
+ y_max = pdata->ts_y_max ? : MAX_12BIT;
+ p_max = pdata->ts_pressure_max ? : MAX_12BIT;
+ ts->x_plate_ohm = pdata->ts_x_plate_ohm ? : 0;
+ ts->esd_timeout = pdata->esd_timeout_ms;
+ ts->set_reset = pdata->set_reset;
+
+ ts->idev = input_allocate_device();
+ if (ts->idev == NULL)
+ return -ENOMEM;
+ ts->idev->name = "TSC2005 touchscreen";
+ snprintf(ts->phys, sizeof(ts->phys), "%s/input-ts",
+ dev_name(&ts->spi->dev));
+ ts->idev->phys = ts->phys;
+ ts->idev->evbit[0] = BIT(EV_ABS) | BIT(EV_KEY);
+ ts->idev->absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE);
+ ts->idev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+
+ input_set_abs_params(ts->idev, ABS_X, 0, x_max, fudge_x, 0);
+ input_set_abs_params(ts->idev, ABS_Y, 0, y_max, fudge_y, 0);
+ input_set_abs_params(ts->idev, ABS_PRESSURE, 0, p_max, fudge_p, 0);
+
+ r = request_threaded_irq(ts->spi->irq, tsc2005_irq_handler,
+ tsc2005_irq_thread, IRQF_TRIGGER_RISING,
+ "tsc2005", ts);
+ if (r) {
+ dev_err(&ts->spi->dev, "request_threaded_irq(): %d\n", r);
+ goto err1;
+ }
+ set_irq_wake(ts->spi->irq, 1);
+
+ r = input_register_device(ts->idev);
+ if (r) {
+ dev_err(&ts->spi->dev, "input_register_device(): %d\n", r);
+ goto err2;
+ }
+
+ r = sysfs_create_group(&ts->spi->dev.kobj, &tsc2005_attr_group);
+ if (r)
+ dev_warn(&ts->spi->dev, "sysfs entry creation failed: %d\n", r);
+
+ tsc2005_start_scan(ts);
+
+ if (!ts->esd_timeout || !ts->set_reset)
+ goto done;
+
+ /* start the optional ESD watchdog */
+ setup_timer(&ts->esd_timer, tsc2005_esd_timer, (unsigned long)ts);
+ INIT_WORK(&ts->esd_work, tsc2005_esd_work);
+ mod_timer(&ts->esd_timer,
+ round_jiffies(jiffies + msecs_to_jiffies(ts->esd_timeout)));
+
+done:
+ return 0;
+
+err2:
+ free_irq(ts->spi->irq, ts);
+
+err1:
+ input_free_device(ts->idev);
+ return r;
+}
+
+static int __devinit tsc2005_probe(struct spi_device *spi)
+{
+ struct tsc2005_platform_data *pdata = spi->dev.platform_data;
+ struct tsc2005 *ts;
+ int r;
+
+ if (spi->irq < 0) {
+ dev_dbg(&spi->dev, "no irq\n");
+ return -ENODEV;
+ }
+
+ if (!pdata) {
+ dev_dbg(&spi->dev, "no platform data\n");
+ return -ENODEV;
+ }
+
+ ts = kzalloc(sizeof(*ts), GFP_KERNEL);
+ if (ts == NULL)
+ return -ENOMEM;
+
+ dev_set_drvdata(&spi->dev, ts);
+ ts->spi = spi;
+ spi->dev.power.power_state = PMSG_ON;
+ spi->mode = SPI_MODE_0;
+ spi->bits_per_word = 8;
+ if (!spi->max_speed_hz)
+ spi->max_speed_hz = TSC2005_SPI_MAX_SPEED_HZ;
+ spi_setup(spi);
+
+ r = tsc2005_setup(ts, pdata);
+ if (r)
+ kfree(ts);
+ return r;
+}
+
+static int __devexit tsc2005_remove(struct spi_device *spi)
+{
+ struct tsc2005 *ts = dev_get_drvdata(&spi->dev);
+
+ mutex_lock(&ts->mutex);
+ tsc2005_disable(ts);
+ mutex_unlock(&ts->mutex);
+
+ if (ts->esd_timeout)
+ del_timer_sync(&ts->esd_timer);
+ del_timer_sync(&ts->penup_timer);
+
+ flush_work(&ts->esd_work);
+ flush_work(&ts->penup_work);
+
+ sysfs_remove_group(&ts->spi->dev.kobj, &tsc2005_attr_group);
+ free_irq(ts->spi->irq, ts);
+ input_unregister_device(ts->idev);
+ kfree(ts);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int tsc2005_suspend(struct spi_device *spi, pm_message_t mesg)
+{
+ struct tsc2005 *ts = dev_get_drvdata(&spi->dev);
+
+ mutex_lock(&ts->mutex);
+ tsc2005_disable(ts);
+ mutex_unlock(&ts->mutex);
+
+ return 0;
+}
+
+static int tsc2005_resume(struct spi_device *spi)
+{
+ struct tsc2005 *ts = dev_get_drvdata(&spi->dev);
+
+ mutex_lock(&ts->mutex);
+ tsc2005_enable(ts);
+ mutex_unlock(&ts->mutex);
+
+ return 0;
+}
+#endif
+
+static struct spi_driver tsc2005_driver = {
+ .driver = {
+ .name = "tsc2005",
+ .owner = THIS_MODULE,
+ },
+#ifdef CONFIG_PM
+ .suspend = tsc2005_suspend,
+ .resume = tsc2005_resume,
+#endif
+ .probe = tsc2005_probe,
+ .remove = __devexit_p(tsc2005_remove),
+};
+
+static int __init tsc2005_init(void)
+{
+ printk(KERN_INFO "TSC2005 driver initializing\n");
+ return spi_register_driver(&tsc2005_driver);
+}
+module_init(tsc2005_init);
+
+static void __exit tsc2005_exit(void)
+{
+ spi_unregister_driver(&tsc2005_driver);
+}
+module_exit(tsc2005_exit);
+
+MODULE_AUTHOR("Lauri Leukkunen <lauri.leukku...@nokia.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:tsc2005");
diff --git a/include/linux/spi/tsc2005.h b/include/linux/spi/tsc2005.h
new file mode 100644
index 0000000..d9b0c84
--- /dev/null
+++ b/include/linux/spi/tsc2005.h
@@ -0,0 +1,41 @@
+/*
+ * This file is part of TSC2005 touchscreen driver
+ *
+ * Copyright (C) 2009-2010 Nokia Corporation
+ *
+ * Contact: Aaro Koskinen <aaro.koski...@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef _LINUX_SPI_TSC2005_H
+#define _LINUX_SPI_TSC2005_H
+
+#include <linux/types.h>
+
+struct tsc2005_platform_data {
+ int ts_pressure_max;
+ int ts_pressure_fudge;
+ int ts_x_max;
+ int ts_x_fudge;
+ int ts_y_max;
+ int ts_y_fudge;
+ int ts_x_plate_ohm;
+ unsigned int esd_timeout_ms;
+ void (*set_reset)(bool enable);
+};
+
+#endif
--
1.6.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
