Setup the mcpm entry address again on system resume as the
iRAM contents are lost across an s2r cycle.
Signed-off-by: Abhilash Kesavan <a.kesa...@samsung.com>
---
This has been tested after applying the Exynos5420 S2R support series
along with Nicolas Pitre's boot cluster CCI enablement patches on Peach
Pit.
arch/arm/mach-exynos/mcpm-exynos.c | 31 +++++++++++++++++++++----------
1 file changed, 21 insertions(+), 10 deletions(-)
diff --git a/arch/arm/mach-exynos/mcpm-exynos.c
b/arch/arm/mach-exynos/mcpm-exynos.c
index 8c610e2..0bf734d 100644
--- a/arch/arm/mach-exynos/mcpm-exynos.c
+++ b/arch/arm/mach-exynos/mcpm-exynos.c
@@ -15,6 +15,7 @@
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/of_address.h>
+#include <linux/syscore_ops.h>
#include <asm/cputype.h>
#include <asm/cp15.h>
@@ -26,6 +27,7 @@
#define EXYNOS5420_CPUS_PER_CLUSTER 4
#define EXYNOS5420_NR_CLUSTERS 2
+static void __iomem *ns_sram_base_addr;
/*
* The common v7_exit_coherency_flush API could not be used because of the
* Erratum 799270 workaround. This macro is the same as the common one (in
@@ -308,10 +310,26 @@ static const struct of_device_id exynos_dt_mcpm_match[] =
{
{},
};
+static void exynos_mcpm_setup_entry_point(void)
+{
+ /*
+ * U-Boot SPL is hardcoded to jump to the start of ns_sram_base_addr
+ * as part of secondary_cpu_start(). Let's redirect it to the
+ * mcpm_entry_point(). This is done during both secondary boot-up as
+ * well as system resume.
+ */
+ __raw_writel(0xe59f0000, ns_sram_base_addr); /* ldr r0, [pc, #0] */
+ __raw_writel(0xe12fff10, ns_sram_base_addr + 4); /* bx r0 */
+ __raw_writel(virt_to_phys(mcpm_entry_point), ns_sram_base_addr + 8);
+}
+
+static struct syscore_ops exynos_mcpm_syscore_ops = {
+ .resume = exynos_mcpm_setup_entry_point,
+};
+
static int __init exynos_mcpm_init(void)
{
struct device_node *node;
- void __iomem *ns_sram_base_addr;
int ret;
node = of_find_matching_node(NULL, exynos_dt_mcpm_match);
@@ -357,16 +375,9 @@ static int __init exynos_mcpm_init(void)
pr_info("Exynos MCPM support installed\n");
- /*
- * U-Boot SPL is hardcoded to jump to the start of ns_sram_base_addr
- * as part of secondary_cpu_start(). Let's redirect it to the
- * mcpm_entry_point().
- */
- __raw_writel(0xe59f0000, ns_sram_base_addr); /* ldr r0, [pc, #0] */
- __raw_writel(0xe12fff10, ns_sram_base_addr + 4); /* bx r0 */
- __raw_writel(virt_to_phys(mcpm_entry_point), ns_sram_base_addr + 8);
+ exynos_mcpm_setup_entry_point();
- iounmap(ns_sram_base_addr);
+ register_syscore_ops(&exynos_mcpm_syscore_ops);
return ret;
}
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
