On Sun, Aug 19, 2018 at 01:32:47PM +0200, Harald Dunkel wrote: > Hi folks, > > since 4.18 my composite mouse/keyboard doesn't work correctly anymore. > Usually the device can switch between keyboard and (gyroscopic) mouse > mode, but with the new kernel the mouse movements seem to generate > cursor up/down events in parallel, regardless of the mode the mouse > is in. > > vendor/product id is 2389/00a8. > > > If I plugin the USB receiver, then 4.17.17 writes this into kern.log: > > Aug 19 13:12:24 porky kernel: [ 58.780112] usb 1-8: USB disconnect, device > number 5 > Aug 19 13:12:24 porky kernel: [ 59.051691] usb 1-8: new full-speed USB > device number 6 using xhci_hcd > Aug 19 13:12:24 porky kernel: [ 59.180180] usb 1-8: New USB device found, > idVendor=062a, idProduct=1a9e, bcdDevice= 1.00 > Aug 19 13:12:24 porky kernel: [ 59.180183] usb 1-8: New USB device strings: > Mfr=1, Product=2, SerialNumber=0 > Aug 19 13:12:24 porky kernel: [ 59.180184] usb 1-8: Product: RF USB > Controller > Aug 19 13:12:24 porky kernel: [ 59.180186] usb 1-8: Manufacturer: U-COMM > Aug 19 13:12:24 porky kernel: [ 59.182692] input: U-COMM RF USB Controller > as > /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:062A:1A9E.0004/input/input16 > Aug 19 13:12:24 porky kernel: [ 59.234586] hid-generic 0003:062A:1A9E.0004: > input,hidraw0: USB HID v1.10 Mouse [U-COMM RF USB Controller] on > usb-0000:00:14.0-8/input0 > Aug 19 13:12:24 porky kernel: [ 59.236704] input: U-COMM RF USB Controller > as > /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.1/0003:062A:1A9E.0005/input/input17 > Aug 19 13:12:24 porky kernel: [ 59.288632] hid-generic 0003:062A:1A9E.0005: > input,hidraw1: USB HID v1.10 Keyboard [U-COMM RF USB Controller] on > usb-0000:00:14.0-8/input1 > Aug 19 13:12:24 porky kernel: [ 59.290936] input: U-COMM RF USB Controller > as > /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.2/0003:062A:1A9E.0006/input/input18 > Aug 19 13:12:24 porky kernel: [ 59.291081] hid-generic 0003:062A:1A9E.0006: > input,hidraw2: USB HID v1.10 Gamepad [U-COMM RF USB Controller] on > usb-0000:00:14.0-8/input2 > Aug 19 13:12:25 porky kernel: [ 59.512028] usb 1-7: new full-speed USB > device number 7 using xhci_hcd > Aug 19 13:12:25 porky kernel: [ 59.640429] usb 1-7: New USB device found, > idVendor=2389, idProduct=00a8, bcdDevice= 2.00 > Aug 19 13:12:25 porky kernel: [ 59.640432] usb 1-7: New USB device strings: > Mfr=1, Product=2, SerialNumber=0 > Aug 19 13:12:25 porky kernel: [ 59.640433] usb 1-7: Product: Usb Composite > Device > Aug 19 13:12:25 porky kernel: [ 59.640435] usb 1-7: Manufacturer: Usb > Composite Device > Aug 19 13:12:25 porky kernel: [ 59.643291] input: Usb Composite Device Usb > Composite Device as > /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:2389:00A8.0007/input/input19 > Aug 19 13:12:25 porky kernel: [ 59.694974] hid-generic 0003:2389:00A8.0007: > input,hidraw3: USB HID v2.00 Mouse [Usb Composite Device Usb Composite > Device] on usb-0000:00:14.0-7/input0 > Aug 19 13:12:25 porky kernel: [ 59.696099] input: Usb Composite Device Usb > Composite Device as > /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.1/0003:2389:00A8.0008/input/input20 > Aug 19 13:12:25 porky kernel: [ 59.747997] hid-generic 0003:2389:00A8.0008: > input,hidraw4: USB HID v2.00 Keyboard [Usb Composite Device Usb Composite > Device] on usb-0000:00:14.0-7/input1 > > > For 4.18.3 the logfile contains > > Aug 19 13:07:07 porky kernel: [ 7215.393644] usb 2-8: USB disconnect, device > number 6 > Aug 19 13:07:07 porky kernel: [ 7215.682577] usb 2-8: new full-speed USB > device number 8 using xhci_hcd > Aug 19 13:07:07 porky kernel: [ 7215.811318] usb 2-8: New USB device found, > idVendor=062a, idProduct=1a9e, bcdDevice= 1.00 > Aug 19 13:07:07 porky kernel: [ 7215.811322] usb 2-8: New USB device strings: > Mfr=1, Product=2, SerialNumber=0 > Aug 19 13:07:07 porky kernel: [ 7215.811324] usb 2-8: Product: RF USB > Controller > Aug 19 13:07:07 porky kernel: [ 7215.811326] usb 2-8: Manufacturer: U-COMM > Aug 19 13:07:07 porky kernel: [ 7215.814160] input: U-COMM RF USB Controller > as > /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/0003:062A:1A9E.0009/input/input29 > Aug 19 13:07:07 porky kernel: [ 7215.865796] hid-generic 0003:062A:1A9E.0009: > input,hidraw0: USB HID v1.10 Mouse [U-COMM RF USB Controller] on > usb-0000:00:14.0-8/input0 > Aug 19 13:07:07 porky kernel: [ 7215.867996] input: U-COMM RF USB Controller > Keyboard as > /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.1/0003:062A:1A9E.000A/input/input30 > Aug 19 13:07:07 porky kernel: [ 7215.919743] input: U-COMM RF USB Controller > System Control as > /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.1/0003:062A:1A9E.000A/input/input31 > Aug 19 13:07:07 porky kernel: [ 7215.919861] input: U-COMM RF USB Controller > Consumer Control as > /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.1/0003:062A:1A9E.000A/input/input32 > Aug 19 13:07:07 porky kernel: [ 7215.919942] input: U-COMM RF USB Controller > Keyboard as > /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.1/0003:062A:1A9E.000A/input/input33 > Aug 19 13:07:07 porky kernel: [ 7215.920158] hid-generic 0003:062A:1A9E.000A: > input,hidraw1: USB HID v1.10 Keyboard [U-COMM RF USB Controller] on > usb-0000:00:14.0-8/input1 > Aug 19 13:07:07 porky kernel: [ 7215.922493] input: U-COMM RF USB Controller > as > /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.2/0003:062A:1A9E.000B/input/input34 > Aug 19 13:07:07 porky kernel: [ 7215.922867] hid-generic 0003:062A:1A9E.000B: > input,hidraw2: USB HID v1.10 Gamepad [U-COMM RF USB Controller] on > usb-0000:00:14.0-8/input2 > Aug 19 13:07:08 porky kernel: [ 7216.144629] usb 2-7: new full-speed USB > device number 9 using xhci_hcd > Aug 19 13:07:08 porky kernel: [ 7216.273321] usb 2-7: New USB device found, > idVendor=2389, idProduct=00a8, bcdDevice= 2.00 > Aug 19 13:07:08 porky kernel: [ 7216.273324] usb 2-7: New USB device strings: > Mfr=1, Product=2, SerialNumber=0 > Aug 19 13:07:08 porky kernel: [ 7216.273326] usb 2-7: Product: Usb Composite > Device > Aug 19 13:07:08 porky kernel: [ 7216.273328] usb 2-7: Manufacturer: Usb > Composite Device > Aug 19 13:07:08 porky kernel: [ 7216.276603] input: Usb Composite Device Usb > Composite Device Mouse as > /devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/0003:2389:00A8.000C/input/input35 > Aug 19 13:07:08 porky kernel: [ 7216.328826] input: Usb Composite Device Usb > Composite Device Consumer Control as > /devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/0003:2389:00A8.000C/input/input36 > Aug 19 13:07:08 porky kernel: [ 7216.328916] input: Usb Composite Device Usb > Composite Device System Control as > /devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/0003:2389:00A8.000C/input/input37 > Aug 19 13:07:08 porky kernel: [ 7216.329006] hid-generic 0003:2389:00A8.000C: > input,hidraw3: USB HID v2.00 Mouse [Usb Composite Device Usb Composite > Device] on usb-0000:00:14.0-7/input0 > Aug 19 13:07:08 porky kernel: [ 7216.330794] input: Usb Composite Device Usb > Composite Device as > /devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.1/0003:2389:00A8.000D/input/input38 > Aug 19 13:07:08 porky kernel: [ 7216.382988] hid-generic 0003:2389:00A8.000D: > input,hidraw4: USB HID v2.00 Keyboard [Usb Composite Device Usb Composite > Device] on usb-0000:00:14.0-7/input1 > > > I tried another gyroscopic mouse (Rii mini i7, vendor/product is 062a/1a9e). > It works very well with 4.18 in keyboard and mouse mode, so I would guess > this is some driver issue. > > Every helpful comment is highly appreciated. Of course I would be glad > to help tracking this down.
This sounds like an input layer problem, care to send this all to linux-in...@vger.kernel.org? thanks, greg k-h
