Add up method for rtl_ops and asign relative functions. Move
clear_bp() and hw_phy_cfg() from init method to up method of rtl_ops.
Call rtl_ops.up() for ndo_open() and rtl_ops.down for ndo_stop().
Replace allocating the memory in probe() with in ndo_open().
Signed-off-by: Hayes Wang <hayesw...@realtek.com>
---
drivers/net/usb/r8152.c | 45 +++++++++++++++++++++++++--------------------
1 file changed, 25 insertions(+), 20 deletions(-)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index b3155da..828572a 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -515,6 +515,7 @@ struct r8152 {
void (*init)(struct r8152 *);
int (*enable)(struct r8152 *);
void (*disable)(struct r8152 *);
+ void (*up)(struct r8152 *);
void (*down)(struct r8152 *);
void (*unload)(struct r8152 *);
} rtl_ops;
@@ -1878,6 +1879,10 @@ static void r8152b_hw_phy_cfg(struct r8152 *tp)
}
r8152b_disable_aldps(tp);
+
+ rtl_clear_bp(tp);
+
+ r8152b_enable_aldps(tp);
set_bit(PHY_RESET, &tp->flags);
}
@@ -1891,6 +1896,7 @@ static void r8152b_exit_oob(struct r8152 *tp)
ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
rxdy_gated_en(tp, true);
+ r8152b_hw_phy_cfg(tp);
ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, 0x00);
@@ -2033,6 +2039,8 @@ static void r8153_hw_phy_cfg(struct r8152 *tp)
r8152_mdio_write(tp, MII_BMCR, data);
}
+ r8153_clear_bp(tp);
+
if (tp->version == RTL_VER_03) {
data = ocp_reg_read(tp, OCP_EEE_CFG);
data &= ~CTAP_SHORT_EN;
@@ -2418,6 +2426,12 @@ static int rtl8152_open(struct net_device *netdev)
struct r8152 *tp = netdev_priv(netdev);
int res = 0;
+ res = alloc_all_mem(tp);
+ if (res)
+ goto out;
+
+ tp->rtl_ops.up(tp);
+
rtl8152_set_speed(tp, AUTONEG_ENABLE,
tp->mii.supports_gmii ? SPEED_1000 : SPEED_100,
DUPLEX_FULL);
@@ -2431,9 +2445,11 @@ static int rtl8152_open(struct net_device *netdev)
netif_device_detach(tp->netdev);
netif_warn(tp, ifup, netdev, "intr_urb submit failed: %d\n",
res);
+ free_all_mem(tp);
}
+out:
return res;
}
@@ -2447,9 +2463,11 @@ static int rtl8152_close(struct net_device *netdev)
cancel_delayed_work_sync(&tp->schedule);
netif_stop_queue(netdev);
tasklet_disable(&tp->tl);
- tp->rtl_ops.disable(tp);
+ tp->rtl_ops.down(tp);
tasklet_enable(&tp->tl);
+ free_all_mem(tp);
+
return res;
}
@@ -2505,21 +2523,14 @@ static void r8152b_init(struct r8152 *tp)
{
u32 ocp_data;
- rtl_clear_bp(tp);
-
if (tp->version == RTL_VER_01) {
ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE);
ocp_data &= ~LED_MODE_MASK;
ocp_write_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE, ocp_data);
}
- r8152b_hw_phy_cfg(tp);
-
r8152_power_cut_en(tp, false);
-
- r8152b_exit_oob(tp);
-
ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR);
ocp_data |= TX_10M_IDLE_EN | PFM_PWM_SWITCH;
ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data);
@@ -2568,8 +2579,6 @@ static void r8153_init(struct r8152 *tp)
ocp_data &= ~TIMER11_EN;
ocp_write_word(tp, MCU_TYPE_USB, USB_WDT11_CTRL, ocp_data);
- r8153_clear_bp(tp);
-
ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE);
ocp_data &= ~LED_MODE_MASK;
ocp_write_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE, ocp_data);
@@ -2590,8 +2599,6 @@ static void r8153_init(struct r8152 *tp)
r8153_power_cut_en(tp, false);
r8153_u1u2en(tp, true);
- r8153_first_init(tp);
-
ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL, ALDPS_SPDWN_RATIO);
ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, EEE_SPDWN_RATIO);
ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3,
@@ -2618,10 +2625,10 @@ static int rtl8152_suspend(struct usb_interface *intf,
pm_message_t message)
usb_kill_urb(tp->intr_urb);
cancel_delayed_work_sync(&tp->schedule);
tasklet_disable(&tp->tl);
+ tp->rtl_ops.down(tp);
+ tasklet_enable(&tp->tl);
}
- tp->rtl_ops.down(tp);
-
return 0;
}
@@ -2632,6 +2639,7 @@ static int rtl8152_resume(struct usb_interface *intf)
tp->rtl_ops.init(tp);
netif_device_attach(tp->netdev);
if (netif_running(tp->netdev)) {
+ tp->rtl_ops.up(tp);
rtl8152_set_speed(tp, AUTONEG_ENABLE,
tp->mii.supports_gmii ? SPEED_1000 : SPEED_100,
DUPLEX_FULL);
@@ -2639,7 +2647,6 @@ static int rtl8152_resume(struct usb_interface *intf)
netif_carrier_off(tp->netdev);
set_bit(WORK_ENABLE, &tp->flags);
usb_submit_urb(tp->intr_urb, GFP_KERNEL);
- tasklet_enable(&tp->tl);
}
return 0;
@@ -2780,6 +2787,7 @@ static int rtl_ops_init(struct r8152 *tp, const struct
usb_device_id *id)
ops->init = r8152b_init;
ops->enable = rtl8152_enable;
ops->disable = rtl8152_disable;
+ ops->up = r8152b_exit_oob;
ops->down = rtl8152_down;
ops->unload = rtl8152_unload;
ret = 0;
@@ -2788,6 +2796,7 @@ static int rtl_ops_init(struct r8152 *tp, const struct
usb_device_id *id)
ops->init = r8153_init;
ops->enable = rtl8153_enable;
ops->disable = rtl8152_disable;
+ ops->up = r8153_first_init;
ops->down = rtl8153_down;
ops->unload = rtl8153_unload;
ret = 0;
@@ -2803,6 +2812,7 @@ static int rtl_ops_init(struct r8152 *tp, const struct
usb_device_id *id)
ops->init = r8153_init;
ops->enable = rtl8153_enable;
ops->disable = rtl8152_disable;
+ ops->up = r8153_first_init;
ops->down = rtl8153_down;
ops->unload = rtl8153_unload;
ret = 0;
@@ -2870,10 +2880,6 @@ static int rtl8152_probe(struct usb_interface *intf,
tp->rtl_ops.init(tp);
set_ethernet_addr(tp);
- ret = alloc_all_mem(tp);
- if (ret)
- goto out;
-
usb_set_intfdata(intf, tp);
ret = register_netdev(netdev);
@@ -2903,7 +2909,6 @@ static void rtl8152_disconnect(struct usb_interface *intf)
tasklet_kill(&tp->tl);
unregister_netdev(tp->netdev);
tp->rtl_ops.unload(tp);
- free_all_mem(tp);
free_netdev(tp->netdev);
}
}
--
1.8.4.2
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
