When the module sends bursts of data, sometimes a deadlock happens in
the hso driver when the tty buffer doesn't get the chance to be flushed
quickly enough.

To avoid this, first, we remove the endless while loop in
put_rx_bufdata() which is the root cause of the deadlock.
Secondly, when there is no room anymore in the tty buffer, we set up a
timer of 100 msecs to give a chance to the upper layer to flush the tty
buffer and make room for new data.

Signed-off-by: Olivier Sobrie <oliv...@sobrie.be>
---
 drivers/net/usb/hso.c |   51 +++++++++++++++++++++++++++++++++----------------
 1 file changed, 35 insertions(+), 16 deletions(-)

diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index 9ca2b41..1dff74f 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -106,6 +106,8 @@
 
 #define MAX_RX_URBS                    2
 
+#define UNTHROTTLE_TIMEOUT             100 /* msecs */
+
 /*****************************************************************************/
 /* Debugging functions                                                       */
 /*****************************************************************************/
@@ -261,6 +263,7 @@ struct hso_serial {
        u16  curr_rx_urb_offset;
        u8   rx_urb_filled[MAX_RX_URBS];
        struct tasklet_struct unthrottle_tasklet;
+       struct timer_list unthrottle_timer;
 };
 
 struct hso_device {
@@ -1161,13 +1164,18 @@ static void put_rxbuf_data_and_resubmit_bulk_urb(struct 
hso_serial *serial)
        while (serial->rx_urb_filled[serial->curr_rx_urb_idx]) {
                curr_urb = serial->rx_urb[serial->curr_rx_urb_idx];
                count = put_rxbuf_data(curr_urb, serial);
-               if (count == -1)
-                       return;
                if (count == 0) {
                        serial->curr_rx_urb_idx++;
                        if (serial->curr_rx_urb_idx >= serial->num_rx_urbs)
                                serial->curr_rx_urb_idx = 0;
                        hso_resubmit_rx_bulk_urb(serial, curr_urb);
+               } else if (count > 0) {
+                       mod_timer(&serial->unthrottle_timer,
+                                 jiffies
+                                       + msecs_to_jiffies(UNTHROTTLE_TIMEOUT));
+                       break;
+               } else {
+                       break;
                }
        }
 }
@@ -1251,6 +1259,11 @@ static   void hso_unthrottle(struct tty_struct *tty)
        tasklet_hi_schedule(&serial->unthrottle_tasklet);
 }
 
+static void hso_unthrottle_schedule(unsigned long data)
+{
+       tasklet_schedule((struct tasklet_struct *)data);
+}
+
 /* open the requested serial port */
 static int hso_serial_open(struct tty_struct *tty, struct file *filp)
 {
@@ -1286,6 +1299,10 @@ static int hso_serial_open(struct tty_struct *tty, 
struct file *filp)
                tasklet_init(&serial->unthrottle_tasklet,
                             (void (*)(unsigned long))hso_unthrottle_tasklet,
                             (unsigned long)serial);
+               serial->unthrottle_timer.function = hso_unthrottle_schedule;
+               serial->unthrottle_timer.data =
+                               (unsigned long)&serial->unthrottle_tasklet;
+               init_timer(&serial->unthrottle_timer);
                result = hso_start_serial_device(serial->parent, GFP_KERNEL);
                if (result) {
                        hso_stop_serial_device(serial->parent);
@@ -1333,6 +1350,7 @@ static void hso_serial_close(struct tty_struct *tty, 
struct file *filp)
                tty_port_tty_set(&serial->port, NULL);
                if (!usb_gone)
                        hso_stop_serial_device(serial->parent);
+               del_timer_sync(&serial->unthrottle_timer);
                tasklet_kill(&serial->unthrottle_tasklet);
        }
 
@@ -2012,22 +2030,23 @@ static int put_rxbuf_data(struct urb *urb, struct 
hso_serial *serial)
 
        tty = tty_port_tty_get(&serial->port);
 
+       if (tty && test_bit(TTY_THROTTLED, &tty->flags)) {
+               tty_kref_put(tty);
+               return -1;
+       }
+
        /* Push data to tty */
-       write_length_remaining = urb->actual_length -
-               serial->curr_rx_urb_offset;
        D1("data to push to tty");
-       while (write_length_remaining) {
-               if (tty && test_bit(TTY_THROTTLED, &tty->flags)) {
-                       tty_kref_put(tty);
-                       return -1;
-               }
-               curr_write_len = tty_insert_flip_string(&serial->port,
-                       urb->transfer_buffer + serial->curr_rx_urb_offset,
-                       write_length_remaining);
-               serial->curr_rx_urb_offset += curr_write_len;
-               write_length_remaining -= curr_write_len;
-               tty_flip_buffer_push(&serial->port);
-       }
+       write_length_remaining = urb->actual_length -
+                                       serial->curr_rx_urb_offset;
+       curr_write_len =
+               tty_insert_flip_string(&serial->port,
+                                      urb->transfer_buffer
+                                               + serial->curr_rx_urb_offset,
+                                      write_length_remaining);
+       serial->curr_rx_urb_offset += curr_write_len;
+       write_length_remaining -= curr_write_len;
+       tty_flip_buffer_push(&serial->port);
        tty_kref_put(tty);
 
        if (write_length_remaining == 0) {
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to