When handling device GET_DESCRIPTOR, composite gadget driver fills
the bcdUSB field only if the gadget supports USB 3.0. Otherwise
the field is left unfilled.
For consistency, set bcdUSB to 0x0200 for gadgets that don't
support superspeed.
It's correct to use 0x0200 for any setting that doesn't use
superspeed, since USB 2.0 devices can restrict themselves to
full speed only. It is NOT correct to use 0x0210, since BOS
descriptors are handled only if gadget_is_superspeed() is
satisfied, otherwise it results in a stall.
Signed-off-by: Igor Kotrasinski <i.kotrasi...@samsung.com>
---
drivers/usb/gadget/composite.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 58b4657..b3196e2 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -1499,6 +1499,8 @@ composite_setup(struct usb_gadget *gadget, const struct
usb_ctrlrequest *ctrl)
} else {
cdev->desc.bcdUSB = cpu_to_le16(0x0210);
}
+ } else {
+ cdev->desc.bcdUSB = cpu_to_le16(0x0200);
}
value = min(w_length, (u16) sizeof cdev->desc);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
