If of_clk_get() fails, the clean-up of already initialized clocks should be
the same as when clk_prepare_enable() fails. Thus a clk_disable_unprepare()
for each clock should be called before the clk_put().
Found by Linux Driver Verification project (linuxtesting.org).
Fixes: 16adc674d0d6 ("usb: dwc3: ep0: fix setup_packet_pending initialization")
Signed-off-by: Andreas Platschek <andreas.platsc...@opentech.at>
---
NOTE: This was only compile-tested
drivers/usb/dwc3/dwc3-of-simple.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/dwc3/dwc3-of-simple.c
b/drivers/usb/dwc3/dwc3-of-simple.c
index c4a4d7bd2766..762370dd7c75 100644
--- a/drivers/usb/dwc3/dwc3-of-simple.c
+++ b/drivers/usb/dwc3/dwc3-of-simple.c
@@ -51,8 +51,10 @@ static int dwc3_of_simple_clk_init(struct dwc3_of_simple
*simple, int count)
clk = of_clk_get(np, i);
if (IS_ERR(clk)) {
- while (--i >= 0)
+ while (--i >= 0) {
+ clk_disable_unprepare(simple->clks[i]);
clk_put(simple->clks[i]);
+ }
return PTR_ERR(clk);
}
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
