Hi Minas,
Am 07.12.2017 um 17:56 schrieb Stefan Wahren:
> Added missing GUSBCFG programming in host mode.
>
> These fields even if was programmed in device mode (in function
> dwc2_hsotg_core_init_disconnected()) will be resetting to POR values
> after core soft reset applied.
> So, each time when switching to host mode required to set these fields
> to correct values. It's allow fix issues with lot of transaction errors
> due to timeouts and turnarrounds on USB bus.
>
> Signed-off-by: Minas Harutyunyan <hmi...@synopsys.com>
please add a fixes tag.
> ---
> drivers/usb/dwc2/hcd.c | 9 ++++++++-
> 1 file changed, 8 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
> index 614bb9603def..05e4e8c07bf1 100644
> --- a/drivers/usb/dwc2/hcd.c
> +++ b/drivers/usb/dwc2/hcd.c
> @@ -2317,10 +2317,17 @@ static int dwc2_core_init(struct dwc2_hsotg *hsotg,
> bool initial_setup)
> */
> static void dwc2_core_host_init(struct dwc2_hsotg *hsotg)
> {
> - u32 hcfg, hfir, otgctl;
> + u32 hcfg, hfir, otgctl, usbcfg, val;
>
> dev_dbg(hsotg->dev, "%s(%p)\n", __func__, hsotg);
>
> + /* Set HS/FS Timeout Calibration and USBTrdTim */
> + usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
> + usbcfg &= ~(GUSBCFG_TOUTCAL_MASK | GUSBCFG_USBTRDTIM_MASK);
> + val = (hsotg->phyif == GUSBCFG_PHYIF8) ? 9 : 5;
> + usbcfg |= (GUSBCFG_TOUTCAL(7) | (val << GUSBCFG_USBTRDTIM_SHIFT));
These are too much magic numbers (9,5,7). Could you please add a comment
or even better defines for them?
Thanks
> + dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
> +
> /* Restart the Phy Clock */
> dwc2_writel(0, hsotg->regs + PCGCTL);
>
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
