In the following test we get stuck by sleeping forever in _dwc3_set_mode()
after which dual-role switching doesn't work.
On dra7-evm's dual-role port,
- Load g_zero gadget driver and enumerate to host
- suspend to mem
- disconnect USB cable to host and connect otg cable with Pen drive in it.
- resume system
- we sleep indefinitely in _dwc3_set_mode due to.
dwc3_gadget_exit()->usb_del_gadget_udc()->udc_stop()->
dwc3_gadget_stop()->wait_event_lock_irq()
Let's clear the DWC3_EP_END_TRANSFER_PENDING flag on all endpoints
so we don't wait in dwc3_gadget_stop().
Signed-off-by: Roger Quadros <rog...@ti.com>
---
drivers/usb/dwc3/gadget.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 2bda4eb..0a360da 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -3273,6 +3273,20 @@ int dwc3_gadget_init(struct dwc3 *dwc)
void dwc3_gadget_exit(struct dwc3 *dwc)
{
+ int epnum;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dwc->lock, flags);
+ for (epnum = 2; epnum < DWC3_ENDPOINTS_NUM; epnum++) {
+ struct dwc3_ep *dep = dwc->eps[epnum];
+
+ if (!dep)
+ continue;
+
+ dep->flags &= ~DWC3_EP_END_TRANSFER_PENDING;
+ }
+ spin_unlock_irqrestore(&dwc->lock, flags);
+
usb_del_gadget_udc(&dwc->gadget);
dwc3_gadget_free_endpoints(dwc);
dma_free_coherent(dwc->sysdev, DWC3_BOUNCE_SIZE, dwc->bounce,
--
cheers,
-roger
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
