I'm running GENERIC.MP with ACPI enabled (20070719 snapshot) on a Thinkpad X60.
I bought a GIGABYTE GN-WI05GS-RH AirCruiser G Mini-PCI-E card from
kd85.com to replace the stock Intel PRO/Wireless 3945ABG. I removed
the Intel card, booted the system and ran tpwireless (while docked),
and then installed the Ralink. It was my understanding that the card
would show up something like this:
rum0 at uhub4 port 1
rum0: Ralink 802.11 bg WLAN, rev 2.00/0.01, addr 2
rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528, address 00:16:e6:34:09:89
I've tried GENERIC.MP and GENERIC with and without ACPI, GENERIC.MP as
shipped with the 20070719 snapshot, and GENERIC as shipped with the
4.1 install CD, but never saw the Ralink in dmesg.
My BIOS version is 2.10 (7BETC9WW) which is dated 20070418. BIOS
version 2.11 is available, but that version apparently only fixes a
scenario where the system may fail to boot from the cdrom, so I
haven't updated.
Can someone spot a problem with the order of operations I went through
when using tpwireless and installing the Ralink? Any suggestions would
be very appreciated.
Here is my snapshot dmesg and sysctl hw:
OpenBSD 4.1-current (GENERIC.MP) #0: Fri Jul 20 10:57:59 PDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
real mem = 2137419776 (2038MB)
avail mem = 2059104256 (1963MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 04/18/07, BIOS32 rev. 0 @
0xfd690, SMBIOS rev. 2.4 @ 0xe0010 (67 entries)
bios0: LENOVO 1709G3U
pcibios0 at bios0: rev 2.1 @ 0xfd620/0x9e0
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdea0/272 (15 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #22 is the last bus
bios0: ROM list: 0xc0000/0xea00! 0xcf000/0x1000 0xd0000/0x1000
0xdc000/0x4000! 0xe0000/0x10000!
acpi0 at mainbus0: rev 2
acpi0: tables DSDT FACP SSDT ECDT TCPA APIC MCFG HPET BOOT SSDT SSDT SSDT SSDT
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpi device at acpi0 from table DSDT not configured
acpi device at acpi0 from table FACP not configured
acpi device at acpi0 from table SSDT not configured
acpi device at acpi0 from table ECDT not configured
acpi device at acpi0 from table TCPA not configured
acpimadt0 at acpi0 table APIC addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 166 MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: duplicate apic id, remapped to apid 2
acpi device at acpi0 from table MCFG not configured
acpihpet0 at acpi0 table HPET: 14318179 Hz
acpi device at acpi0 from table BOOT not configured
acpi device at acpi0 from table SSDT not configured
acpi device at acpi0 from table SSDT not configured
acpi device at acpi0 from table SSDT not configured
acpi device at acpi0 from table SSDT not configured
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 0 (AGP_)
acpiprt2 at acpi0: bus 2 (EXP0)
acpiprt3 at acpi0: bus 3 (EXP1)
acpiprt4 at acpi0: bus 4 (EXP2)
acpiprt5 at acpi0: bus 12 (EXP3)
acpiprt6 at acpi0: bus 21 (PCI1)
acpiec0 at acpi0: EC__
acpicpu0 at acpi0 C3, C2
acpicpu1 at acpi0 C3, C2
acpitz0 at acpi0, critical temperature: 127 degC
acpitz1 at acpi0, critical temperature: 97 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT0: model: 93P5029 serial: 437 type: LION oem: SANYO
acpibat1 at acpi0: BAT1: not present
acpibat2 at acpi0: BAT2: not present
acpiac0 at acpi0: AC unit online
acpidock0 at acpi0: GDCK: docked (15)
cpu0: unknown Enhanced SpeedStep CPU, msr 0x06130c2406000c24
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 2000 MHz (1276 mV): speeds: 2000, 1000 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM MCH" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03: aperture
at 0xee100000, size 0x10000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02:
apic 2 int 17 (irq 11)
azalia0: host: High Definition Audio rev. 1.0
azalia0: codec: Analog Devices AD1981HD (rev. 2.0), HDA version 1.0
azalia0: RIRB time out
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02
pci1 at ppb0 bus 2
em0 at pci1 dev 0 function 0 "Intel PRO/1000MT (82573L)" rev 0x00:
apic 2 int 16 (irq 11), address 00:16:d3:31:2f:4b
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02
pci2 at ppb1 bus 3
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02
pci3 at ppb2 bus 4
ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02
pci4 at ppb3 bus 12
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 2
int 16 (irq 11)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 2
int 17 (irq 11)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 2
int 18 (irq 11)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 2
int 19 (irq 11)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 2
int 19 (irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0: Intel EHCI root hub, rev 2.00/1.00, addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci5 at ppb4 bus 21
cbb0 at pci5 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xb4: apic 2
int 16 (irq 11)
"Ricoh 5C552 Firewire" rev 0x09 at pci5 dev 0 function 1 not configured
sdhc0 at pci5 dev 0 function 2 "Ricoh 5C822 SD/MMC" rev 0x18: apic 2
int 18 (irq 11)
sdmmc0 at sdhc0
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 22 device 0 cacheline 0x0, lattimer 0xb0
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD/CDRW UJDA775, CB01> SCSI0
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI SATA" rev 0x02:
apic 2 int 16 (irq 11), AHCI 1.1
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, HTS541040G9SA00, MB2I> SCSI2 0/direct fixed
sd0: 38154MB, 4864 cyl, 255 head, 63 sec, 512 bytes/sec, 78140160 sec total
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic
2 int 23 (irq 11)
iic0 at ichiic0
usb1 at uhci0: USB revision 1.0
uhub1 at usb1: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4: Intel UHCI root hub, rev 1.00/1.00, addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt2 at isa0 port 0x3bc/4: polled
aps0 at isa0 port 0x1600/31
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
uhub5 at uhub0 port 6: vendor 0x17ef product 0x1000, rev 2.00/0.01, addr 2
ugen0 at uhub4 port 2
ugen0: STMicroelectronics Biometric Coprocessor, rev 1.00/0.01, addr 2
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a swap on sd0b dump on sd0b
hw.machine=i386
hw.model=Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz ("GenuineIntel" 686-class)
hw.ncpu=2
hw.byteorder=1234
hw.physmem=2137419776
hw.usermem=2137411584
hw.pagesize=4096
hw.disknames=cd0,sd0
hw.diskcount=2
hw.sensors.acpitz0.temp0=63.05 degC (zone temperature)
hw.sensors.acpitz1.temp0=63.05 degC (zone temperature)
hw.sensors.acpibat0.volt0=14.40 VDC (voltage)
hw.sensors.acpibat0.volt1=16.61 VDC (current voltage)
hw.sensors.acpibat0.watthour0=73.31 Wh (last full capacity)
hw.sensors.acpibat0.watthour1=3.67 Wh (warning capacity)
hw.sensors.acpibat0.watthour2=0.20 Wh (low capacity)
hw.sensors.acpibat0.watthour3=72.07 Wh (remaining capacity), OK
hw.sensors.acpibat0.raw0=0 (battery idle), OK
hw.sensors.acpibat0.raw1=0 (rate)
hw.sensors.acpiac0.indicator0=On (power supply)
hw.sensors.acpidock0.indicator0=On (docked)
hw.sensors.cpu0.temp0=64.00 degC
hw.sensors.aps0.temp0=45.00 degC
hw.sensors.aps0.temp1=45.00 degC
hw.sensors.aps0.indicator0=Off (Keyboard Active)
hw.sensors.aps0.indicator1=Off (Mouse Active)
hw.sensors.aps0.indicator2=On (Lid Open)
hw.sensors.aps0.raw0=498 (X_ACCEL)
hw.sensors.aps0.raw1=505 (Y_ACCEL)
hw.sensors.aps0.raw2=498 (X_VAR)
hw.sensors.aps0.raw3=506 (Y_VAR)
hw.cpuspeed=1995
hw.setperf=100
hw.vendor=LENOVO
hw.product=1709G3U
hw.version=ThinkPad X60
hw.serialno=LVD6250
hw.uuid=2a4afc60-77b1-11db-8510-e4b0a9ddd65f
