Vivek Ayer <[EMAIL PROTECTED]> wrote: > On a related note, if enc0 is actually for something else, I have a > bunch of gigabit PCI ethernet cards, but these aren't Sun PCI. Is > there a workaround for this?
You can put non-Sun PCI components into a Blade without problems. The firmware will not support booting from them, but if OpenBSD has a driver, they will be work just fine. To my Blade 100, for instance, I have added two ethernet cards and a crypto accelerator that aren't from Sun: hifn0 at pci1 dev 0 function 0 "Hifn 7955/7954" rev 0x00: LZS 3DES ARC4 MD5 SHA1 RNG AES PK, 32KB dram, ivec 0x7d9 fxp0 at pci1 dev 1 function 0 "Intel 8255x" rev 0x08, i82559: ivec 0x7ca, address 00:d0:b7:3c:01:7c inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4 em0 at pci1 dev 2 function 0 "Intel PRO/1000MT (82540EM)" rev 0x02: ivec 0x7d5, address 00:07:e9:3e:60:2f -- Christian "naddy" Weisgerber [EMAIL PROTECTED]
