Hi,
I have been trying a carp setup today and I am consistently getting
the following panic:
Stopped at Xrecurse_legacy5+0x30: pushl $0
ddb> trace
Xrecurse_legacy5() at Xrecurse_legacy5+0x30
--- interrupt ---
0:
It doesn't seem to happen at any noticeable (or that I have noticed)
key event. This is a 4.4-release install, but scrolling through the
list of patches at openbsd.org doesn't seem to have anything relevant
listed.
DMESG (ignore disk errors, its not the disk i am using):
OpenBSD 4.4 (GENERIC) #1021: Tue Aug 12 17:16:55 MDT 2008
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel"
686-class) 2.41 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
real mem = 3740631040 (3567MB)
avail mem = 3632529408 (3464MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/25/08, BIOS32 rev. 0 @
0xe9040, SMBIOS rev. 2.5 @ 0xea980 (84 entries)
bios0: vendor Hewlett-Packard version "786F3 v01.13" date 06/25/2008
bios0: Hewlett-Packard HP xw4600 Workstation
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP APIC ASF! MCFG TCPA SLIC HPET DMAR
acpi0: wakeup devices COM1(S4) COM2(S4) PCI0(S4) PEG1(S4) PEG2(S4)
IGBE(S4) PCX1(S4) PCX2(S4) PCX5(S4) PCX6(S4) HUB_(S4) USB1(S3)
USB2(S3) USB3(S3) USB4(S3) USB5(S3) USB6(S3) EUS1(S3) EUS2(S3)
PBTN(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PEG1)
acpiprt2 at acpi0: bus -1 (PEG2)
acpiprt3 at acpi0: bus 40 (PCX1)
acpiprt4 at acpi0: bus -1 (PCX2)
acpiprt5 at acpi0: bus 52 (PCX5)
acpiprt6 at acpi0: bus 63 (PCX6)
acpiprt7 at acpi0: bus 16 (HUB_)
acpicpu0 at acpi0: C2
acpibtn0 at acpi0: PBTN
bios0: ROM list: 0xc0000/0xd200 0xcd200/0x1000 0xce200/0x1a00
0xcfc00/0x2000! 0xe6400/0x9c00!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82X38 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "Intel 82X38 PCIE" rev 0x00: irq 10
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x040e rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
drm at vga1 unsupported
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: irq 11
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: irq 5
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x02: irq 10
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: irq 10
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x02: irq 5
azalia0: codec[s]: Realtek/0x0262
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02
pci2 at ppb1 bus 40
ppb2 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x02: irq 11
pci3 at ppb2 bus 52
jmb0 at pci3 dev 0 function 0 "JMicron JMB368 IDE" rev 0x00
pciide0 at jmb0: DMA, channel 0 wired to native-PCI, channel 1 wired
to native-PCI
pciide0: using irq 10 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 1: <Addonics CF>
wd0: 1-sector PIO, LBA, 64MB, 131072 sectors
wd0(pciide0:0:1): using PIO mode 4
pciide0: channel 1 disabled (no drives)
ppb3 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x02: irq 5
pci4 at ppb3 bus 63
bge0 at pci4 dev 0 function 0 "Broadcom BCM5755" rev 0x02, BCM5755 A2
(0xa002): irq 5, address 00:21:5a:c5:6e:2f
brgphy0 at bge0 phy 1: BCM5755 10/100/1000baseT PHY, rev. 0
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: irq 11
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: irq 5
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: irq 10
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: irq 11
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
pci5 at ppb4 bus 16
re0 at pci5 dev 4 function 0 "Realtek 8169" rev 0x10: RTL8169S
(0x0400), irq 11, address 00:18:4d:ea:77:57
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 0
vr0 at pci5 dev 9 function 0 "VIA RhineII-2" rev 0x43: irq 5, address
00:50:ba:2e:f0:72
sqphy0 at vr0 phy 8: Seeq 80225 10/100 PHY, rev. 0
"AT&T/Lucent FW322 1394" rev 0x61 at pci5 dev 11 function 0 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801IR LPC" rev 0x02: PM disabled
pciide1 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using irq 5 for native-PCI interrupt
wd1 at pciide1 channel 0 drive 0: <ST380815AS>
wd1: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd1(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
wd2 at pciide1 channel 1 drive 0: <WDC WD5000AAKS-60A7B0>
wd2: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
atapiscsi0 at pciide1 channel 1 drive 1
scsibus0 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, CDDVDW TS-H653Q, HC01> ATAPI
5/cdrom removable
wd2(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
cd0(pciide1:1:1): using PIO mode 4, Ultra-DMA mode 5
pciide2 at pci0 dev 31 function 5 "Intel 82801I SATA" rev 0x02: DMA,
channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide2: using irq 5 for native-PCI interrupt
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask fd6d netmask fd6d ttymask ffff
mtrr: Pentium Pro MTRR support
uhidev0 at uhub7 port 1 configuration 1 interface 0 "Logitech USB
Optical Mouse" rev 2.00/43.01 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
umass0 at uhub3 port 1 configuration 1 interface 0 "WIBU-SYSTEMS AG
CodeMeter-Stick" rev 1.10/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <WIBU -, CodeMeter-Stick, v1.0> SCSI2
0/direct fixed
sd0: 39MB, 5 cyl, 255 head, 63 sec, 512 bytes/sec, 80384 sec total
softraid0 at root
wd0c: track 0 not found reading fsbn 64 of 64-67 (wd0 bn 64; cn 0 tn 1
sn 1), retrying
wd0c: track 0 not found reading fsbn 64 of 64-67 (wd0 bn 64; cn 0 tn 1
sn 1), retrying
wd0c: track 0 not found reading fsbn 64 of 64-67 (wd0 bn 64; cn 0 tn 1
sn 1), retrying
wd0c: track 0 not found reading fsbn 64 of 64-67 (wd0 bn 64; cn 0 tn 1
sn 1), retrying
wd0: soft error (corrected)
wd0c: track 0 not found reading fsbn 1024 of 1024-1027 (wd0 bn 1024;
cn 0 tn 16 sn 16), retrying
wd0c: track 0 not found reading fsbn 1024 of 1024-1027 (wd0 bn 1024;
cn 0 tn 16 sn 16), retrying
wd0c: track 0 not found reading fsbn 1024 of 1024-1027 (wd0 bn 1024;
cn 0 tn 16 sn 16), retrying
wd0c: track 0 not found reading fsbn 1024 of 1024-1027 (wd0 bn 1024;
cn 0 tn 16 sn 16), retrying
wd0: soft error (corrected)
root on wd2a swap on wd2b dump on wd2b
WARNING: / was not properly unmounted
carp0: state transition: BACKUP -> MASTER
--
Best Regards
Edd Barrett
(Freelance software developer / technical writer / open-source developer)
http://students.dec.bournemouth.ac.uk/ebarrett
