Hi all,
I just downloaded, built and installed nut-2.0.4-pre2. I have an APC
Smart ups 3000 connected via a usb cable. I have compiled and installed
the usb drivers.
I installed the libhidups and libhid.usermap per the README.
I have the following ups.conf:
[APC-3000-ups]
driver = newhidups
port = auto
desc = "APC smart 3000"
When I try to start the driver I get the following output:
(pocono pts19) # ./upsdrvctl -v start
Network UPS Tools - UPS driver controller 2.0.4-pre2
exec: /usr/local/ups/bin/newhidups -a APC-3000-ups
Network UPS Tools: New USB/HID UPS driver 0.28 (2.0.4-pre2)
No matching USB/HID UPS found
Driver failed to start (exit status=1)
(pocono pts19) #
/proc/bus/usb/devices shows the following:
T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=051d ProdID=0002 Rev= 0.06
S: Manufacturer=American Power Conversion
S: Product=Smart-UPS 3000 RM FW:666.6.D USB FW:2.4
S: SerialNumber=JS0438010331
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 30mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
E: Ad=81(I) Atr=03(Int.) MxPS= 6 Ivl=100ms
Can anyone give me an idea how to get this working?
The machine is RHEL4 x86_64.
Regards,
Tom
_______________________________________________
Nut-upsuser mailing list
Nut-upsuser@lists.alioth.debian.org
http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
