Hi James, thanks for the feedback. The output you get seems generally fine, except for battery.voltage: 0.0 and output.voltage: 164.0; these values are consistent with what Phil DeBoest reported.
Upsmon normally executes the shutdown command when you reach the "low battery" threshold, as decided by the UPS and/or driver. It does so by looking at ups.status, not battery.charge. -- Peter James Pooton wrote: > > The SVN worked fine for me :) Results below. Just curious, given the data > the Tripp Lite LCD UPSs currently return, when does upsmon decide it's time > to execute the shutdown command? Is it just when it's on battery alert and > finally reaches some internal low threshold of battery.charge? > > Thanks for all your work... > > -James > > [EMAIL PROTECTED] bin]# /usr/local/ups/bin/upsc [EMAIL PROTECTED] > battery.charge: 100 > battery.type: PbAc > battery.voltage: 0.0 > battery.voltage.nominal: 24.0 > driver.name: newhidups > driver.parameter.port: auto > driver.version: 2.1.0 > driver.version.data: TrippLite HID 0.1 (experimental) > driver.version.internal: 0.30 > input.frequency: 59.7 > input.voltage: 118.8 > input.voltage.nominal: 120 > output.frequency.nominal: 60 > output.voltage: 164.0 > output.voltage.nominal: 120 > ups.beeper.status: enabled > ups.delay.reboot: 65535 > ups.delay.shutdown: 65535 > ups.mfr: Tripp Lite > ups.model: TRIPP LITE UPS > ups.power.nominal: 1200 > ups.serial: 692199 B > ups.status: OL CHRG > > -James > > -----Original Message----- > From: Peter Selinger [mailto:[EMAIL PROTECTED] > Sent: Monday, August 07, 2006 4:40 PM > To: James Pooton > Subject: Re: Tripp Lite LCD models w/ NUT > > Hi James, > > thanks for your message! I think I have fixed this USB report > descriptor bug now (as per my previous message). Let me know if it's > working! Thanks, -- Peter > > James Pooton wrote: > > > > Hello! > > > > > > > > Thanks for all your help with NUT! :-) One of your messages on the NUT > > mailing list saved me today. Just wanted to give you thanks, and an FYI > > that I took in 6 new Tripp Lite 1500 LCD systems this week and all of them > > had the USB report descriptor size bug (Unable to get Report descriptor > > (-75)). I contacted Tripp Lite about it, and the rep took my "report" but > > said there were no firmware updates available or in the works that he saw. > > Someday if you're able to make the workaround part of the source it would > be > > greatly appreciated by those of us with bug ridden UPSs :-) > > > > > > > > Thanks again! > > > > > > > > -james > _______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser