On 9/14/07, Alexander Fradiani <[EMAIL PROTECTED]> wrote: > > >> The Winpower software speaks the megatec protocol, so>>"megatec_usb" is > >> your best shot. If it doesn't work, maybe its>>maintainers can help > >> modifying it in order to work. > >> --> Carlos Rodrigues. > > i had an older version so i upgraded to nut 2.2.0-1. using the "megatec_usb" > driver, this is what i get: > #upsdrvctl start > "No supported devices found. Please check your device availability with > 'lsusb' and make sure you have an up-to-date version of NUT. If this does not > help, try running the driver with at least 'vendorid' and 'subdriver' options > specified."
Did you use the vendorid and subdriver options? Please post the full command line. > the only device connected via usb that i have now is the ups, i think that > i'm pointing to the right port. The traditional concept of a named "port" in NUT only applies to serial UPSes - the software uses different mechanisms to select which USB device to use. -- - Charles Lepple _______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser