> Dear List, The driver usbhid-ups does not detect my MGE Ellipse 1500. > > I'm running openSuSE Linux 10.3, kernel 2.6.22 with mgeups-psp-3.0.4-2, > nut-2.2.0-20 installed from MGE's rpm's. (Merci MGE!) > > lsusb shows: > Bus 001 Device 004: ID 0463:ffff MGE UPS Systems UPS > > /etc/ups/ups.conf says: > [myups] > driver = usbhid-ups > port = auto > desc = "Local UPS" > vendorid = 0463 > > I launched upsdrvctl in debug mode: > > pastis: # /usr/lib/ups/driver/upsdrvctl -DDDDD start > Network UPS Tools - UPS driver controller 2.2.0- > Starting UPS: myups > exec: /usr/lib/ups/driver/usbhid-ups -a myups > Network UPS Tools: 0.28 USB communication driver 0.28 - core 0.30 (2.2.0-) > > No matching HID UPS found > Driver failed to start (exit status=1) > > Any suggestion would be very welcome.
This is a known problem with the new kernel in openSUSE 10.3: https://bugzilla.novell.com/show_bug.cgi?id=331749 Unfortunately, this is apparently not very high on the list of priorities. So for now, I suggest to apply the changes by hand. :-( Best regards, Arjen -- Eindhoven - The Netherlands Key fingerprint - 66 4E 03 2C 9D B5 CB 9B 7A FE 7E C1 EE 88 BC 57 _______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser