On Fri, Dec 28, 2007 at 01:23:43PM +0000, Carlos Rodrigues wrote: > On Dec 28, 2007 10:29 AM, Jason Pearce <[EMAIL PROTECTED]> wrote: > > Thanks for your reply. Do you know if this is something that is going to be > > fixed - and does it prevent "normal" use of the nut driver ? > > Well, the problem is with the UPS firmware itself, and it does prevent > use of the driver. If the driver thinks the UPS is "off", it will not > notice it if is on-battery or not. > > I may provide a workaround, but you need to run a little test: with > the UPS powering something other than the computer (a lightbulb, for > example), tell the UPS to power off the load by sending it an instant > command: > > upscmd -u <nut_admin_user> -p <nut_admin_password> <your_ups> load.off > > Then, run "upsc <your_ups>" to see the status. The status will either > remain "OFF" or switch to something else ("OL"). Either way, I'll know > what's needed, if an option to interpret the "OFF" bit the other way > around, or just ignore it. >
But shutdown is still not implemented (at least in the krauler subdriver)! And I'can't help to support shutdown because my own UPS doesn't do it well. -- Alexander _______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser