> Apologies for the number of emails; I just tried starting as user root and > the error message changes but the outcome is the same: > > --------------- > [EMAIL PROTECTED] drivers]# /sbin/upsdrvctl -u root -DDDDD start > Network UPS Tools - UPS driver controller 2.2.0- > Starting UPS: unial1200 > exec: /sbin/megatec_usb -a unial1200 > Network UPS Tools 2.3.0-1222M - Megatec protocol driver 1.5.11 > [megatec_usb] > Carlos Rodrigues (c) 2003-2007 > > Serial-over-USB transport layer for Megatec protocol driver [megatec_usb] > Andrey Lelikov (c) 2006, Alexander Gordeev (c) 2006-2007, Jon Gough (c) > 2007 > > ser_get_line: Device detached? (error -110: No error) > Successfully reconnected > ser_get_line: Device detached? (error -110: No error) > Successfully reconnected > ser_get_line: Device detached? (error -110: No error) > Successfully reconnected > ser_get_line: Device detached? (error -110: No error) > Successfully reconnected > ser_get_line: Device detached? (error -110: No error) > Successfully reconnected > Megatec protocol UPS not detected. > ------------------- > > Thought that maybe shed some light...
In order to get some useful debug info from the driver, don't use upsdrvctl to start it, but start it directly through /sbin/megatec_usb -DDDDD -a unial1200 Best regards, Arjen -- Eindhoven - The Netherlands Key fingerprint - 66 4E 03 2C 9D B5 CB 9B 7A FE 7E C1 EE 88 BC 57 _______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser