On Sat, 19 Apr 2008, Charles Lepple wrote: > On Sat, Apr 19, 2008 at 9:16 AM, Roger Price <[EMAIL PROTECTED]> wrote: > > On Sat, 19 Apr 2008, Charles Lepple wrote: > > > > > Do you have libtool installed? > > > > No, it wasn't asked for. > > Hence, my question to Arjen about whether autoreconf needs to be > called (it uses libtool, but the spec file shouldn't need to call > autoreconf in the first place). > > I'm no expert on 64-bit systems or RPM-based distributions, but when > you installed gcc42, what executables are installed that start with > 'gcc'? (If you type 'gcc<TAB>' on the command line, what is returned?)
Ok, it was just some n00b fumbling - I went back to the openSUSE 10.3 rpm repositories and found an rpm "gcc" which installs nothing, but defines links /usr/bin/cc -> gcc-4.2 and /usr/bin/gcc -> gcc-4.2 With this in place, the command rpmbuild --rebuild nut-2.2.2-pre2.src.rpm goes further. The output is visible at http://rogerprice.org/rpmbuild.log It ends with checking whether to enable HAL support... yes configure: error: "neon libraries not found, required for neon based XML/HTTP driver" error: Bad exit status from /var/tmp/rpm-tmp.52627 (%build) I looked for "neon" in the rpm repositories and found "neon-devel" which hadn't been asked for. I installed it and rpm -qa | grep neon now reports neon-0.26.4-17 neon-devel-0.26.4-17 With neon-devel in place, the build now produces three rpm's: Wrote: /usr/src/packages/RPMS/x86_64/nut-2.2.2-pre2.x86_64.rpm Wrote: /usr/src/packages/RPMS/x86_64/nut-devel-2.2.2-pre2.x86_64.rpm Wrote: /usr/src/packages/RPMS/x86_64/nut-hal-2.2.2-pre2.x86_64.rpm ls -alF /usr/src/packages/RPMS/x86_64/ reports: total 2668 drwxrwxrwt 2 root root 4096 2008-04-19 19:29 ./ drwxrwxrwt 4 root root 4096 2008-03-11 16:35 ../ -rw-r--r-- 1 root root 2360916 2008-04-19 19:29 nut-2.2.2-pre2.x86_64.rpm -rw-r--r-- 1 root root 28061 2008-04-19 19:29 nut-devel-2.2.2-pre2.x86_64.rpm -rw-r--r-- 1 root root 321756 2008-04-19 19:29 nut-hal-2.2.2-pre2.x86_64.rpm I'll try them tomorrow; meanwhile, another n00bie question : What does nut-hal do? Do I need it? Roger _______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser