On Thu, May 8, 2008 at 4:20 AM, Peter McKenna <[EMAIL PROTECTED]> wrote: > That's correct. I used to be able to toggle it in Nut 2.0 and > the response from upsc would show off/on, but if you unplugged it it would > still beep. I assumed there where other less critical beep alerts being > turned off.
Then it never actually worked, it only appeared to work. The driver was probably assuming the beeper was on at startup and just changing its internal state when you issued the toggle command without actually getting that state from the UPS. Can you check the logs (/var/log/messages or similar, depending on the distribution you're using) to see if there's any message there indicating the beeper.toggle command didn't succeed? -- Carlos Rodrigues _______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser