Hi, I'm not the maintainter for the "megatec_usb" driver (in fact, I'm no longer maintainer for the base "megatec" either), so I don't really know the status for that particular UPS.
I'm forwarding this to the NUT mailing-list though. Regards, -- Carlos Rodrigues On Fri, Dec 5, 2008 at 10:30 AM, Adrian Czerniak <[EMAIL PROTECTED]> wrote: > Hi, > > are you going to support Mustek PowerMust 848? I'm not able to run it with > lastest SVN: > > #./megatec_usb -a mustek -DDDDD > Network UPS Tools 2.3.0-1595 - Megatec protocol driver 1.5.18 [megatec_usb] > Carlos Rodrigues (c) 2003-2008 > > Serial-over-USB transport layer for Megatec protocol driver [megatec_usb] > Andrey Lelikov (c) 2006, Alexander Gordeev (c) 2006-2007, Jon Gough (c) 2007 > > debug level is '5' > Checking device (0665/5161) (003/004) > - VendorID: 0665 > - ProductID: 5161 > - Manufacturer: Cypress Semiconductor > - Product: USB to Serial > - Serial Number: unknown > - Bus: 003 > Trying to match device > Device matches > DTR=1, RTS=0 > send_to_all: SETINFO driver.version.internal "1.5.18" > Starting UPS detection process... > Asking for UPS information [I]... > I => FAILED [short read] > I detail: (1 bytes) => 49 > Asking for UPS status [Q1]... > 00]_data_phoenix: got so far [Q1 > get_data_phoenix: (8 bytes) => 51 31 0d 2e 30 0d 30 30 > Q1 => FAILED [short read] > Q1 detail: (2 bytes) => 51 31 > Asking for UPS status [Q1]... > 00]_data_phoenix: got so far [Q1 > get_data_phoenix: (8 bytes) => 51 31 0d 2e 30 0d 30 30 > Q1 => FAILED [short read] > Q1 detail: (2 bytes) => 51 31 > Asking for UPS status [Q1]... > 00]_data_phoenix: got so far [Q1 > get_data_phoenix: (8 bytes) => 51 31 0d 2e 30 0d 30 30 > Q1 => FAILED [short read] > Q1 detail: (2 bytes) => 51 31 > Asking for UPS status [Q1]... > 00]_data_phoenix: got so far [Q1 > get_data_phoenix: (8 bytes) => 51 31 0d 2e 30 0d 30 30 > Q1 => FAILED [short read] > Q1 detail: (2 bytes) => 51 31 > Asking for UPS status [Q1]... > 00]_data_phoenix: got so far [Q1 > get_data_phoenix: (8 bytes) => 51 31 0d 2e 30 0d 30 30 > Q1 => FAILED [short read] > Q1 detail: (2 bytes) => 51 31 > 5 out of 5 detection attempts failed (minimum failures: 2). > Megatec protocol UPS not detected. > > -- > Regards, > Adrian Czerniak > > _______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser