Hi Again Bill, Checked up the manual for the APC. It looks like you have to do some configuration with the POWERCHUTE SOFTWARE. Reset the battery date and make a runtime calibration test.
If this is not done it may as it say in the "Problem and/possible cause" THE LEDS IN THE BATTERY BAR GRAPH ARE BLINKING TOGETHER Problem While online or on battery, the expected remaining runtime is lower than the configured low battery warning interval. Note: The number of blinking LEDs still indicates the rela- tive state of charge of the connected batteries. It may be: The battery runtime meter has fallen out of calibration and needs to be recalibrated. This is worth testing before calling the APC support. Kjell _______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
