Sorry the UPS was in kind of strange state hat to switch it off and restart Battery disconnected was also reported by the original HP software on another system
Temp can be that high because a server rack is direct on the UPS rack - no airflow inbetween - just for testing reasons Now the new upsc (everything in normal operational state now) ambient.temperature: 46 ambient.temperature.high: 75 battery.charge: 95 battery.runtime: 1476 battery.voltage: 39.20 driver.name: bcmxcp driver.parameter.baud_rate: 9600 driver.parameter.pollinterval: 2 driver.parameter.port: /dev/ttyS1 driver.version: 2.4.1 driver.version.internal: 0.21 input.frequency: 50.00 input.frequency.high: 55 input.frequency.low: 45 input.frequency.nominal: 50 input.transfer.boost.high: 207 input.transfer.high: 266 input.transfer.low: 194 input.transfer.trim.low: 243 input.voltage: 231 input.voltage.nominal: 230 outlet.1.delay.shutdown: -1 outlet.1.delay.start: 0 outlet.1.id: 1 outlet.1.status: On outlet.2.delay.shutdown: -1 outlet.2.delay.start: 1 outlet.2.id: 2 outlet.2.status: On output.current: 1.9 output.current.nominal: 6.4 output.frequency: 50.00 output.phases: 1 output.voltage: 231 output.voltage.nominal: 230 ups.beeper.status: enabled ups.firmware: Cont:02.00 Inve:02.00 ups.load: 29.3 ups.model: HP R1500 G2 1500VA ups.power: 439 ups.power.nominal: 1500 ups.serial: 3C88431991 ups.status: OL -----Ursprüngliche Nachricht----- Von: Kjell Claesson [mailto:kjell.claes...@epost.tidanet.se] Gesendet: Freitag, 19. Februar 2010 11:55 An: nut-upsuser@lists.alioth.debian.org Cc: Schupfer Stephan Betreff: Re: [Nut-upsuser] HP R1500 G2 UPS Hi Stephan, > ups.alarm: BATTERIES_DISCONNECTED > ups.status: ALARM OL > Can you confirm that you have disconnected the battery. So we don't have a problem parsing the alarm block. /Kjell _______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser