Hi Michael, thanks for your feedback! I'm cc'ing the NUT users list for info. I've also added an entry for your device (Powerwalker Line Interactive VI 1400, using blazer_usb).
Can you please send back an upsc output, and at least check for the shutdown behavior, if not already done: http://new.networkupstools.org/user-manual.html#Testing_shutdowns 2010/10/19 MichaelE <662...@bugs.launchpad.net> > It works now! > > I reinstalled 2.4.3 and checked the blazer_usb driver again. First I > thought it did not work but then discovered a configuration error: When > changing from megatec to blazer, the value for offdelay needs to be > changed. In megatec it is minutes and in blazer it is seconds. As it > does not allow a value smaller than 6, the blazer_usb refused to work > (it was 1 in megatec). > > Thanks a lot to Arnaud for the quick reply! > thanks goes to Arjen de Korte, a NUT senior lieutenant, who worte the blazer drivers. > Here is my new ups.conf now: > > [ups01] > driver = blazer_usb > port = auto > vendorid = 0665 > productid = 5161 > # after shutdown, wait 5 minutes after return of power > ondelay = 5 > # wait 1 minute after power-off command before cutting power > offdelay = 60 > > ** Changed in: nut (Ubuntu) > Status: Incomplete => Fix Released > > -- > megatec_usb driver stopped working after upgrade from 8.04 to 10.04 > https://bugs.launchpad.net/bugs/662435 > You received this bug notification because you are subscribed to nut in > ubuntu. > cheers, Arnaud -- Linux / Unix Expert R&D - Eaton - http://powerquality.eaton.com Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer - http://www.debian.org Free Software Developer - http://arnaud.quette.free.fr/
_______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
