Hi Vladimir, > Dears, > > I finally resolve my problem, I just make symbolic link: > [t...@box var/run/]# ln -s -T /var/state/ups/ nut > Now I finally got services online: > # /sbin/service ups start > Starting UPS driver controller: [ OK ] > Starting upsd: [ OK ] > Starting UPS monitor (master): [ OK ] > 8<--------------------snip--------------------- > ups.mfr: unknown > ups.model: unknown > ups.serial: unknown > ups.status: OL > ups.temperature: 25.0 > This may due to that it is not responding to the info comand (I/cr). You can test it like this.
/path/to/blazer_usb -DD -a mustek -u root If you get any 'short reply' or 'invalid start character'. The mfr model and serial is from the same function. > I use megatec_usb driver and try with blazer_usb and same situation, I > don`t got ups.model/serial/mfr. > On shutdown (when battery is low), my ups shutdown strange, got off all led > and when I put power again, I must press power button to "turn off" ups and > press it again, to get the power. > > > What do you think what is the problem?! > What happens if you wait. Some ups'es need to have a serten charge level to start. This to manage a power-out after power on. If it starts direct, and the battery is empty, it would shut off before a safe powerdown. Regards Kjell _______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser