On Tue, 2011-07-26 at 15:30 +0300, Павел Гуменюк wrote: > After adding COM1 I've got this: > > c:\Program Files (x86)\NUT\bin>powercom.exe -DDD -a KIN1500 > Network UPS Tools - PowerCom protocol UPS driver 0.13 > (2.6.1-3057:3116M) > 0.000000 debug level is '3' > 0.000000 w32_serial_open (notUsed) > 0.000000 could not open notUsed > > Unable to open notUsed: Operation not permitted > > Things to try: > > - Check 'port=' in ups.conf > > - Check owner/permissions of all parts of path > > 0.015600 Fatal error: unusable configuration > > c:\Program Files (x86)\NUT\bin>powercom.exe -DDD -a KIN1500 > Network UPS Tools - PowerCom protocol UPS driver 0.13 > (2.6.1-3057:3116M) > 0.000000 debug level is '3' > 0.000000 w32_serial_open (COM1) > 0.015600 setting initial state on COM1 > 0.015600 00000054 = w32_serial_open (COM1) > 0.015600 Warning: no locking method is available: No error > [+яхЁрЎш єёях > °эю чртхЁ°хэр. ] > 0.031200 vmin_ 0, vtime_ 0 > 0.140400 action 0 > 0.140400 vtime 0, vmin 1 > > 0.140400 ReadTotalTimeoutConstant -2, ReadIntervalTimeout -1, > ReadTotalTi > meoutMultiplier -1 > 0.140400 DTR => 0, RTS => 1 > 0.140400 Values of arguments: > 0.140400 manufacturer : 'PowerCom' > 0.140400 model name : 'Unknown' > 0.156000 serial number : 'Unknown' > 0.156000 line voltage : '230' > 0.156000 type : 'Trust' > 0.156000 number of bytes from UPS: '11' > 0.156000 method of flow control : 'dtr0rts1' > 0.156000 validation sequence: '{{5,0},{7,0},{8,0}}' > 0.171600 shutdown arguments: '{{0,10},n}' > 0.171600 frequency calculation coefficients: > '{0.000210,0.000209}' > 0.171600 load percentage calculation coefficients: > '{6.134300,-0.380800, > 4.311000,0.181100}' > 0.171600 battery percentage calculation coefficients: > '{5.000000,0.32680 > 0,-825.000000,4.563900,-835. > 820007}' > 0.187200 voltage calculation coefficients: > '{0.954500,0.000000}' > 0.343200 data receiving error (validation check) > 0.343200 dstate_init: sock \\.\pipe\powercom-KIN1500 open on fd > 100 > 3.432006 data receiving error (0 instead of 11 bytes) > 6.442811 data receiving error (0 instead of 11 bytes) > 9.453616 data receiving error (0 instead of 11 bytes) > 12.464422 data receiving error (0 instead of 11 bytes) > 21.668438 data receiving error (0 instead of 11 bytes) > 24.679243 data receiving error (0 instead of 11 bytes)
Hello Pavel, Maybe it's a bug in serial drivers. It's hard to be sure since I don't have a Powercom UPS for testing. Anyway, I will privately send you an experimental binary. If it doesn't fix your issue, please send its output on this list using -DDDDD ( five D) for maximum output. Fred > > c:\Program Files (x86)\NUT\bin> > > > 2011/7/19 Павел Гуменюк <pavel.gumen...@gmail.com> > I have only RS-232 on the box (meanwhile, it was manufactured > on march of 2011) > Here is my configs: > > nut.conf: > > > MODE = netserver > > > ups.conf: > > > [KIN1500] > driver = powercom > port = notUsed > desc = "Powercom KING PRO KIN-1500AP RM" > > > > upsd.conf: > > > LISTEN 192.168.1.2 3493 > > > > upsd.users: > > > [monuser] > password = xxxxxxxx > upsmon master > > > > upsmon.conf: > > > MONITOR KIN1500@192.168.1.2 1 monuser xxxxxxxx master > MINSUPPLIES 1 > SHUTDOWNCMD "C:\\WINDOWS\\system32\\shutdown.exe -s -t 0" > NOTIFYCMD /sbin/upssched > POLLFREQ 5 > POLLFREQALERT 5 > HOSTSYNC 15 > DEADTIME 15 > POWERDOWNFLAG "C:\\killpower" > NOTIFYFLAG ONLINE SYSLOG+WALL+EXEC > NOTIFYFLAG ONBATT SYSLOG+WALL+EXEC > NOTIFYFLAG LOWBATT SYSLOG+WALL+EXEC > RBWARNTIME 43200 > NOCOMMWARNTIME 300 > FINALDELAY 5 > > > > upssched.conf: > > > CMDSCRIPT /bin/upssched-cmd > AT ONBATT * START-TIMER onbattwarn 10 > AT ONLINE * CANCEL-TIMER onbattwarn > AT LOWBATT * EXECUTE lowbattwarn > AT ONBATT * START-TIMER timeshutdown 100 > AT ONLINE * CANCEL-TIMER timeshutdown > > > After start I can see couple neutral events: > upsd.exe - listening on 192.168.1.2 port 3493. > upsd.exe - User monuser@192.168.1.2 logged into UPS [KIN1500]. > > Also, there are a lot of errors, such as "upsmon - Poll UPS > [KIN1500@192.168.1.2] failed - Data stale." > Anybody, please advise how to get it works. > Thanks > > _______________________________________________ > Nut-upsuser mailing list > Nut-upsuser@lists.alioth.debian.org > http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser -- Team Open Source Eaton - http://powerquality.eaton.com -------------------------------------------------------------------------- _______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser