Tomorrow I will do the test! 2012/2/16 Arnaud Quette <aquette....@gmail.com>: > Halo Thomas und Mario ;-) > > 2012/2/14 Thomas Maisl <exp-122...@maisl.com>: >> >> attached information was retrieved while UPS was operating _offline_ (doing >> a runtime test) > > thanks a lot for your test results. > >> 1. lsusb -v -d06dA:0002 >> 2-6. blazer_usb using subdriver <cypress|phoenix|ippon|krauler> >> with and w/o protocol zinto >> >> IMO cypress with zinto produced the best result, ippon and krauler didn't >> work > > indeed cypress with zinto is the best fit, though your unit doesn't > answer to anything else than the basic 'Q1' > phoenix also provides the same support. > >> [YQ450] >> driver = blazer_usb >> subdriver = cypress >> protocol = zinto >> vendorid = 06da >> productid = 0002 >> port = auto >> desc = "Yunto YQ450 via USB" > > I've just committed a patch to the trunk (r3447) which links > "06da:0002" to the cypress subdriver, and added the following HCL > entry: > > "Online" "ups" "2" "Yunto YQ450" "" "blazer_usb" > > This means that you now (using the latest trunk) just need to specify: > [YQ450] > driver = blazer_usb > protocol = zinto > port = auto > desc = "Yunto YQ450 via USB" > > Moreover, specifying "zinto" is not that useful, since only "Q1" is supported. > So you can omit it. > > Can you please counter check, and report back upsc/upsrw/upscmd > output, along with the shutdown test: > http://www.networkupstools.org/docs/user-manual.chunked/ar01s06.html#Shutdown_design > > the remaining point is still with the other unit (06da:0601) from Mario... > @Mario: as per your previous feedback, your unit reports 'Q1', 'F', > but not 'I'. > so could you please do the same tests I asked Thomas, with "protocol=zinto"? > this should use 'FW?' and provide vendor info. > > cheers, > Arnaud
_______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser