Hi Charles, Thanks for your response.
> For the 1000, do the values match this page? > > > http://buildbot.networkupstools.org/~buildbot/cayman/docs/latest/ddl/APC/Smart-UPS_1000.html > > Yes it does (except that mine is a 120 V model, so input/output voltage is about 125) It doesn't look like we have an entry for a C1500 yet. Would you care to > submit the output of upsc, upsrw and upscmd -l? > Here it is $upscmd -l apc1500 Instant commands supported on UPS [apc1500]: beeper.disable - Disable the UPS beeper beeper.enable - Enable the UPS beeper beeper.mute - Temporarily mute the UPS beeper beeper.off - Obsolete (use beeper.disable or beeper.mute) beeper.on - Obsolete (use beeper.enable) load.off - Turn off the load immediately load.off.delay - Turn off the load with a delay (seconds) shutdown.reboot - Shut down the load briefly while rebooting the UPS shutdown.stop - Stop a shutdown in progress $ upsrw apc1500 [battery.charge.low] Remaining battery level when UPS switches to LB (percent) Type: STRING Value: 10 [battery.runtime.low] Remaining battery runtime when UPS switches to LB (seconds) Type: STRING Value: 120 [ups.delay.shutdown] Interval to wait after shutdown with delay command (seconds) Type: STRING Value: 20 $ upsc apc1500 battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 50 battery.runtime: 3780 battery.runtime.low: 120 battery.type: PbAc battery.voltage: 27.0 battery.voltage.nominal: 24.0 device.mfr: American Power Conversion device.model: Smart-UPS C 1500 device.serial: 3S1437X00405 device.type: ups driver.name: usbhid-ups driver.parameter.pollfreq: 30 driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.parameter.productid: 0003 driver.parameter.vendorid: 051d driver.version: 2.6.4 driver.version.data: APC HID 0.95 driver.version.internal: 0.37 ups.beeper.status: disabled ups.delay.shutdown: 20 ups.firmware: UPS 09.6 / ID=1005 ups.mfr: American Power Conversion ups.mfr.date: 2014/09/09 ups.model: Smart-UPS C 1500 ups.productid: 0003 ups.serial: 3S1437X00405 ups.status: OL ups.timer.reboot: -1 ups.timer.shutdown: -1 ups.vendorid: 051d > > If you want to check for any hidden variables, stop the driver, and run > "/lib/nut/usbhid-ups -a name -DDD 2>&1 | tee /tmp/APC_Smart-UPS-C1500.log" > as root for a few minutes (it will loop endlessly; press ^C to stop). > Please gzip the log before attaching it and sending back to the list. > > gzipped output is attached. Thanks for looking into this. Selva
APC_Smart-UPS-C-1500.log.gz
Description: GNU Zip compressed data
_______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser