On Aug 21, 2017, at 1:35 PM, Whiteshell Tech <n...@whiteshell-tech.com> wrote: > > I ran it again on battery and upsd running, set upsrw ok and then > shutdown.return gave an "ERR CMD-NOT-SUPPORTED" Odd thing is after running > that I am getting random timed ups powering off for one or two seconds then > turns back on even on battery. Server then starts shutting down. Some times > its right away sometimes after 4+ minutes.
That is going to be hard to diagnose without the usbhid-ups logs for the time when those commands are sent - can you try to keep the log going while sending them, then note the time when the command was sent? You can use the "tee" command: /lib/nut/usbhid-ups -DD -a TrippLiteUPS 2>&1 | tee /tmp/log.shutdown.return.txt (please use gzip before attaching the log - the mailing list does not accept messages over 40kB without manual intervention.) > I did notice that that return.shutdown was not found in the list running > "upscmd -l TrippLiteUPS". I did see "load.off.delay" which also if I give a > value of 60 (or any other value) it shuts down in 20sec and stays off either > on battery or online. ups does come back on if i replug the ups. I think the load.off.delay behavior is expected, but I really thought the others should honor the delay variables. Will have to look further. > > > I am setting up a test computer with fresh Debian 9 for testing to see if all > my issues are still there without every thing else. > > Thanks for taking the time when you have some. > > > root@host:~# upscmd -l TrippLiteUPS > Instant commands supported on UPS [TrippLiteUPS]: > > beeper.disable - Disable the UPS beeper > beeper.enable - Enable the UPS beeper > beeper.mute - Temporarily mute the UPS beeper > beeper.off - Obsolete (use beeper.disable or beeper.mute) > beeper.on - Obsolete (use beeper.enable) > load.off - Turn off the load immediately > load.off.delay - Turn off the load with a delay (seconds) > reset.watchdog - Reset watchdog timer > shutdown.reboot - Shut down the load briefly while rebooting the UPS > shutdown.stop - Stop a shutdown in progress > test.battery.start.deep - Start a deep battery test > test.battery.start.quick - Start a quick battery test > test.battery.stop - Stop the battery test > > > > root@host:~# upsrw -s ups.delay.shutdown=60 TrippLiteUPS@localhost > Username (root): upsmon > Password: > OK > > root@host:~# upscmd TrippLiteUPS shutdown.return > Username (root): upsmon > Password: > Unexpected response from upsd: ERR CMD-NOT-SUPPORTED > log trimmed; appears to be the same as before? _______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
