You can enable dvr today with ovs-dpdk(e.g. netdev datapath) and it will 
function well enough to pass tempet test but no.

Dvr with the netdev datapath has very poor performance. So much so that it is 
not useable in a production deployment.

This is because dvr uses kernel namespace + tap devices to perform the routing. 
Tap devices are not accelerated by dpdk
So when you add them to the dpdk datapath they are not processed in a polling 
manner by the dpdk pmd thread. Tap device
When attached to the netdev datapath are instead processed by the single 
threaded netdev datapath resulting in a maximum forwarding
Rate of ~40,000 pps. To put that in perspective kernel ovs can forward packets 
via a tap device at ~480,000pps
and dpdk will give you 5mpps+ via vhost-user so using dvr with ovs-dpdk today 
is not a viable option.

I did a poc of dvr style routing with neutron 12 months ago based on work I did 
in 2014. The blueprint was rejected as I had not figured out how to fully 
eliminate the network namespaces
In the north sourth case. We started looking at this problem again a few weeks 
ago and hope to develop a solution that will work with all ovs datapath In 
ocata.

Today the best way to get dvr style routing with ovs-dpdk that perfroms well is 
to use a controller such as ovn or odl which implement routing as openflow 
rules.
Using openflow rules for routing which is how my poc worked is more efficient 
then kernel routing even with kernel ovs. With ovs-dpdk openflow routing removes
The bottleneck that is introduced by the linux kernel interfaces allowing the 
full performance of the datapath to be maintained. Both ovn and odl have
Support for ovs-dpdk/vhost-user and both provide openflow based routing that 
can be used today.

Our current recommended configuration when using the ovs neutron agent with 
ovs-dpdk compute nodes is to use centralized ha routing on network nodes 
running kernel ovs or
Use provider routing. Both solutions will give significant performance 
improvements over dvr with ovs-dpdk.

Regards
Sean.

From: huangdenghui [mailto:hdh_1...@163.com]
Sent: Wednesday, August 24, 2016 3:29 AM
To: OpenStack Development Mailing List (not for usage questions) 
<openstack-dev@lists.openstack.org>
Subject: [openstack-dev] [neutron][networking-ovs-dpdk][dvr] how to use dvr 
with networking-ovs-dpdk

hi
    Is it possible to use dvr with networking-ovs-dpdk now? If not, is it on 
the roadmap of networking-ovs-dpdk?


发自网易邮箱手机版

__________________________________________________________________________
OpenStack Development Mailing List (not for usage questions)
Unsubscribe: openstack-dev-requ...@lists.openstack.org?subject:unsubscribe
http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev

Reply via email to