Colin,
A not necessarily straight forward way is to use the Warp filter to
remove the mesh motion (assumes you have the displacement vector as a
point value in your datum set). Then the POL Filter end-points remain
fixed with respect to the two nodes over which you initially placed the
end-points.
However, implicit in this approach is that the POL Filter's line is a
material line and deforms with the material, probably not remaining a
straight line as the time (or loading) progresses. It may or may not be
the result for which you are looking?
Samuel Key
FMA Development, LLC
On 10/2/2013 6:03 PM, Colin McAuliffe wrote:
Hello all, I would like to use a plot over line filter where the line
is defined by two nodes on the mesh, which move in time, rather than
defining the line with two fixed spacial points. Is it possible to do
this with the POL filter as is, or will this require some extra
scripting?
Thanks
Colin
_______________________________________________
Powered by www.kitware.com
Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html
Please keep messages on-topic and check the ParaView Wiki at:
http://paraview.org/Wiki/ParaView
Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview
