Andrei,
If this is a Clip/Slice operation you want to repeat on this geometry as
you alter the simulation parameters, or if this is an operation to which
you want return, and continue post-processing, you have the possibility
to save the entire pipeline in a myjob.pvsm file.
Go to File>Save State... , you then will have the opportunity to name
the file 'myjob' and go to a location where you would like to save the
myjob.pvsm.
To re-create the operations saved in myjob.pvsm, go to File>Load
State... The Load State operation will give you the opportunity to
continue with the original simulation datum set myjob.abc or select, for
example, myjob-ver2.abc
Hope this helps
Sam Key, Fma Development
On 4/16/2017 8:02 AM, Andrei Zarojanu via ParaView wrote:
Hi,
Please help me with 2 issues:
I have a topography in paraview. After I select some points and I
select the filter "Extract Selection" in the left a window appears
with the index of the points in the order I choosed them. However when
I save the csv file of this filter, I find the points ordered from
small to large by their indexes. How can I save this selection, so I
have the indexes in the order I choosed the points?
On the same topography I select the filter clip/slice. In the left
appears a window with the plane parameters, the coordinates of the
point and the coordinates of the normal. Is there any way to extract
this values? When I save the csv file from this it gives the
coordinates for all the points in the selection.
Thanks a lot!
Best regards, Andrei
_______________________________________________
Powered by www.kitware.com
Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html
Please keep messages on-topic and check the ParaView Wiki at:
http://paraview.org/Wiki/ParaView
Search the list archives at: http://markmail.org/search/?q=ParaView
Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview
_______________________________________________
Powered by www.kitware.com
Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html
Please keep messages on-topic and check the ParaView Wiki at:
http://paraview.org/Wiki/ParaView
Search the list archives at: http://markmail.org/search/?q=ParaView
Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview
