Daniel P. Berrangé <berra...@redhat.com> writes:
> Currently we have a short paragraph saying that patches must include
> a Signed-off-by line, and merely link to the kernel documentation.
> The linked kernel docs have a lot of content beyond the part about
> sign-off an thus are misleading/distracting to QEMU contributors.
>
> This introduces a dedicated 'code-provenance' page in QEMU talking
> about why we require sign-off, explaining the other tags we commonly
> use, and what to do in some edge cases.
>
<snip>
> +
> +Other commit tags
> +~~~~~~~~~~~~~~~~~
> +
> +While the ``Signed-off-by`` tag is mandatory, there are a number of other
> tags
> +that are commonly used during QEMU development:
> +
> + * **``Reviewed-by``**: when a QEMU community member reviews a patch on the
> + mailing list, if they consider the patch acceptable, they should send an
> + email reply containing a ``Reviewed-by`` tag. Subsystem maintainers who
> + review a patch should add this even if they are also adding their
> + ``Signed-off-by`` to the same commit.
> +
> + * **``Acked-by``**: when a QEMU subsystem maintainer approves a patch that
> + touches their subsystem, but intends to allow a different maintainer to
> + queue it and send a pull request, they would send a mail containing a
> + ``Acked-by`` tag. Where a patch touches multiple subsystems, ``Acked-by``
> + only implies review of the maintainers' own areas of responsibility. If a
> + maintainer wants to indicate they have done a full review they should use
> + a ``Reviewed-by`` tag.
> +
> + * **``Tested-by``**: when a QEMU community member has functionally tested
> the
> + behaviour of the patch in some manner, they should send an email reply
> + containing a ``Tested-by`` tag.
> +
> + * **``Reported-by``**: when a QEMU community member reports a problem via
> the
> + mailing list, or some other informal channel that is not the issue
> tracker,
> + it is good practice to credit them by including a ``Reported-by`` tag on
> + any patch fixing the issue. When the problem is reported via the GitLab
> + issue tracker, however, it is sufficient to just include a link to the
> + issue.
> +
> + * **``Suggested-by``**: when a reviewer or other 3rd party makes non-trivial
> + suggestions for how to change a patch, it is good practice to credit them
> + by including a ``Suggested-by`` tag.
Should we mention our use of Message-Id in so far the informal good
practice is that we keep the Message-Id's of the last time a patch was
posted and potentially the message-ids of previous posters?
But this is definitely an improvement of what we had before so:
Reviewed-by: Alex Bennée <alex.ben...@linaro.org>
> +
> +Subsystem maintainer requirements
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +When a subsystem maintainer accepts a patch from a contributor, in addition
> to
> +the normal code review points, they are expected to validate the presence of
> +suitable ``Signed-off-by`` tags.
> +
> +At the time they queue the patch in their subsystem tree, the maintainer
> +**must** also then add their own ``Signed-off-by`` to indicate that they have
> +done the aforementioned validation. This is in addition to any of their own
> +``Reviewed-by`` tags the subsystem maintainer may wish to include.
> +
> +Tools for adding ``Signed-off-by``
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +There are a variety of ways tools can support adding ``Signed-off-by`` tags
> +for patches, avoiding the need for contributors to manually type in this
> +repetitive text each time.
> +
> +git commands
> +^^^^^^^^^^^^
> +
> +When creating, or amending, a commit the ``-s`` flag to ``git commit`` will
> +append a suitable line matching the configuring git author details.
> +
> +If preparing patches using the ``git format-patch`` tool, the ``-s`` flag can
> +be used to append a suitable line in the emails it creates, without modifying
> +the local commits. Alternatively to modify all the local commits on a
> branch::
> +
> + git rebase master -x 'git commit --amend --no-edit -s'
> +
> +emacs
> +^^^^^
> +
> +In the file ``$HOME/.emacs.d/abbrev_defs`` add::
> +
> + (define-abbrev-table 'global-abbrev-table
> + '(
> + ("8rev" "Reviewed-by: YOUR NAME <y...@email.addr>" nil 1)
> + ("8ack" "Acked-by: YOUR NAME <y...@email.addr>" nil 1)
> + ("8test" "Tested-by: YOUR NAME <y...@email.addr>" nil 1)
> + ("8sob" "Signed-off-by: YOUR NAME <y...@email.addr>" nil 1)
> + ))
> +
> +with this change, if you type (for example) ``8rev`` followed by ``<space>``
> +or ``<enter>`` it will expand to the whole phrase.
> +
> +vim
> +^^^
> +
> +In the file ``$HOME/.vimrc`` add::
> +
> + iabbrev 8rev Reviewed-by: YOUR NAME <y...@email.addr>
> + iabbrev 8ack Acked-by: YOUR NAME <y...@email.addr>
> + iabbrev 8test Tested-by: YOUR NAME <y...@email.addr>
> + iabbrev 8sob Signed-off-by: YOUR NAME <y...@email.addr>
> +
> +with this change, if you type (for example) ``8rev`` followed by ``<space>``
> +or ``<enter>`` it will expand to the whole phrase.
> +
> +Re-starting abandoned work
> +~~~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +For a variety of reasons there are some patches that get submitted to QEMU
> but
> +never merged. An unrelated contributor may decide (months or years later) to
> +continue working from the abandoned patch and re-submit it with extra
> changes.
> +
> +The general principles when picking up abandoned work are:
> +
> + * Continue to credit the original author for their work, by maintaining
> their
> + original ``Signed-off-by``
> + * Indicate where the original patch was obtained from (mailing list, bug
> + tracker, author's git repo, etc) when sending it for review
> + * Acknowledge the extra work of the new contributor by including their
> + ``Signed-off-by`` in the patch in addition to the orignal author's
> + * Indicate who is responsible for what parts of the patch. This is typically
> + done via a note in the commit message, just prior to the new contributor's
> + ``Signed-off-by``::
> +
> + Signed-off-by: Some Person <some.per...@example.com>
> + [Rebased and added support for 'foo']
> + Signed-off-by: New Person <new.per...@mycorp.test>
> +
> +In complicated cases, or if otherwise unsure, ask for advice on the project
> +mailing list.
> +
> +It is also recommended to attempt to contact the original author to let them
> +know you are interested in taking over their work, in case they still
> intended
> +to return to the work, or had any suggestions about the best way to continue.
> diff --git a/docs/devel/index-process.rst b/docs/devel/index-process.rst
> index 362f97ee30..b54e58105e 100644
> --- a/docs/devel/index-process.rst
> +++ b/docs/devel/index-process.rst
> @@ -13,6 +13,7 @@ Notes about how to interact with the community and how and
> where to submit patch
> maintainers
> style
> submitting-a-patch
> + code-provenance
> trivial-patches
> stable-process
> submitting-a-pull-request
> diff --git a/docs/devel/submitting-a-patch.rst
> b/docs/devel/submitting-a-patch.rst
> index 83e9092b8c..2cc4d53ff6 100644
> --- a/docs/devel/submitting-a-patch.rst
> +++ b/docs/devel/submitting-a-patch.rst
> @@ -322,23 +322,8 @@ Patch emails must include a ``Signed-off-by:`` line
>
> Your patches **must** include a Signed-off-by: line. This is a hard
> requirement because it's how you say "I'm legally okay to contribute
> -this and happy for it to go into QEMU". The process is modelled after
> -the `Linux kernel
> -<http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/Documentation/SubmittingPatches?id=f6f94e2ab1b33f0082ac22d71f66385a60d8157f#n297>`__
> -policy.
> -
> -If you wrote the patch, make sure your "From:" and "Signed-off-by:"
> -lines use the same spelling. It's okay if you subscribe or contribute to
> -the list via more than one address, but using multiple addresses in one
> -commit just confuses things. If someone else wrote the patch, git will
> -include a "From:" line in the body of the email (different from your
> -envelope From:) that will give credit to the correct author; but again,
> -that author's Signed-off-by: line is mandatory, with the same spelling.
> -
> -There are various tooling options for automatically adding these tags
> -include using ``git commit -s`` or ``git format-patch -s``. For more
> -information see `SubmittingPatches 1.12
> -<http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/Documentation/SubmittingPatches?id=f6f94e2ab1b33f0082ac22d71f66385a60d8157f#n297>`__.
> +this and happy for it to go into QEMU". For full guidance, read the
> +:ref:`code-provenance` documentation.
>
> .. _include_a_meaningful_cover_letter:
--
Alex Bennée
Virtualisation Tech Lead @ Linaro
