A lot more needed here on what these are for and what can be done with them.
Signed-off-by: Jonathan Cameron <jonathan.came...@huawei.com> --- docs/system/devices/cxl.rst | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/docs/system/devices/cxl.rst b/docs/system/devices/cxl.rst index b742120657..62b6161474 100644 --- a/docs/system/devices/cxl.rst +++ b/docs/system/devices/cxl.rst @@ -406,6 +406,33 @@ OS management of CXL memory devices as described here. * CONFIG_CXL_PORT * CONFIG_CXL_REGION + +CCI access via MCTP over I2C +---------------------------- + +TODO: Add some more info here on what this actually is. + +Both CXL switches and CXL Type 3 devices support configuration via +MCTP access to Component Command Interfaces (CCIs) on the devices. + +Example configuration: + + -device cxl-upstream,port=33,bus=root_port0,id=us0,multifunction=on,addr=0.0,sn=12345678 \ + -device cxl-downstream,port=0,bus=us0,id=swport0,chassis=0,slot=4 \ + -device cxl-downstream,port=1,bus=us0,id=swport1,chassis=0,slot=5 \ + -device cxl-downstream,port=2,bus=us0,id=swport2,chassis=0,slot=6 \ + -device cxl-type3,bus=swport0,persistent-memdev=cxl-mem1,id=cxl-pmem0,lsa=cxl-lsa1,sn=3 \ + -device cxl-type3,bus=swport1,persistent-memdev=cxl-mem2,id=cxl-pmem1,lsa=cxl-lsa2,sn=4 \ + -device cxl-type3,bus=swport2,persistent-memdev=cxl-mem3,id=cxl-pmem2,lsa=cxl-lsa3,sn=5 \ + -machine cxl-fmw.0.targets.0=cxl.1,cxl-fmw.0.size=4G,cxl-fmw.0.interleave-granularity=1k \ + -device i2c_mctp_cxl,bus=aspeed.i2c.bus.0,address=4,target=us0 \ + -device i2c_mctp_cxl,bus=aspeed.i2c.bus.0,address=5,target=cxl-pmem0 \ + -device i2c_mctp_cxl,bus=aspeed.i2c.bus.0,address=6,target=cxl-pmem1 \ + -device i2c_mctp_cxl,bus=aspeed.i2c.bus.0,address=7,target=cxl-pmem2 + +Communication with the MCTP CCI can then be established using standard MCTP configuration +tools. + References ---------- -- 2.39.2