Hi Sam. To tackle this problem, I would advice to create another bug. Creation and closing of a bug "leaves trails", which maybe will help another person, when googling for the same problem.
To help you, can you do a "relax -i" on both computers? That give some indication about package versions and computer setup. The first thing we need to establish, is that mpirun is working. We have to test the installation without relax. Can you have a look at: http://wiki.nmr-relax.com/OpenMPI Try the different things like: lscpu mpirun --report-bindings -np 11 echo "hello world" mpirun --report-bindings -np 4 relax --multi='mpi4py' When we are confident about this, then we will try make a small test script for relax. Please try these things at both computers, and provide 2 files with commands and output. Then attach it to the bug report. 2016-09-14 6:40 GMT+02:00 Mahdi, Sam <sam.mahdi....@my.csun.edu>: > Hi Troels, > > So I saw the tutorial you put, and the main problem was I had not > specified my data was only for the Nitrogen spins. After applying the spin > column, my data loaded and relax ran model free with no problem. I have a > script that starts and runs relax and model free all automatic, if you wish > I can send it via email to you and you can upload it to the tutorial wiki > page. So I can successfully run model-free in script mode for a > uni-processor. > The problem now with the multi-processor is that the script won't load. In > the bug page I uploaded a screenshot where I had input the 'mpirun -np 4 > ../relax --multi='mpi4py' command, however I had no output. I checked > processes running in the background, and saw that there was indeed 4 > processess running in the background (1 master and 3 slaves) for relax; but > there was no output, so I was unable to load any data, or create a pipe or > anything. This was only on the Fedora 24 computer, not the Fedora 20. On > the Fedora 20 computer, I was able to successfully open relax on a multi > processor platform. I can send the screenshots and the relax -i for both > computers again. I don't know why it doesn't work the fedora 24. Do you > know what could be causing this? > > Thanks again in advance > > On Tue, Sep 13, 2016 at 9:32 PM, Troels Emtekær Linnet < > tlin...@nmr-relax.com> wrote: > >> Hi Sam >> >> Can you send the mail again and include the maillist? >> >> Best Troels >> >> >> Den tirsdag den 13. september 2016 skrev Mahdi, Sam < >> sam.mahdi....@my.csun.edu>: >> >>> HI Troels, >>> >>> So I saw the tutorial you put, and the main problem was I had not >>> specified my data was only for the Nitrogen spins. After applying the spin >>> column, my data loaded and relax ran model free with no problem. I have a >>> script that starts and runs relax and model free all automatic, if you wish >>> I can send it via email to you and you can upload it to the tutorial wiki >>> page. So I can successfully run model-free in script mode for a >>> uni-processor. >>> The problem now with the multi-processor is that the script won't load. >>> In the bug page I uploaded a screenshot where I had input the 'mpirun -np 4 >>> ../relax --multi='mpi4py' command, however I had no output. I checked >>> processes running in the background, and saw that there was indeed 4 >>> processess running in the background (1 master and 3 slaves) for relax; but >>> there was no output, so I was unable to load any data, or create a pipe or >>> anything. This was only on the Fedora 24 computer, not the Fedora 20. On >>> the Fedora 20 computer, I was able to successfully open relax on a multi >>> processor platform. I can send the screenshots and the relax -i for both >>> computers again. I don't know why it doesn't work the fedora 24. Do you >>> know what could be causing this? >>> >>> Thanks again in advance >>> Sam >>> >>> On Tue, Sep 13, 2016 at 1:01 PM, Troels Emtekær Linnet < >>> tlin...@nmr-relax.com> wrote: >>> >>>> Hi Sam. >>>> >>>> I closed the 2 bug reports as invalid. >>>> >>>> The data is not labelled correct. >>>> But this can be corrected. >>>> >>>> Please see this tutorial I wrote: >>>> http://wiki.nmr-relax.com/Tutorial_for_model-free_analysis_sam_mahdi >>>> >>>> I hope this give some guidance. >>>> >>>> If you experience any new problems, please feel free to ask!! >>>> >>>> What you experience, will probably be the same for many. >>>> Your feedback is valuable for the development. >>>> >>>> Please wait with using mpirun and multiple processors, before you are >>>> absolutely sure >>>> that it will run on 1 processor. >>>> >>>> Bugfixing when using multiple processors is a nightmare.... >>>> >>>> Best >>>> Troels >>>> >>>> 2016-09-12 17:36 GMT+02:00 Mahdi, Sam <sam.mahdi....@my.csun.edu>: >>>> >>>>> Hi Troels, >>>>> >>>>> I just created another bug report. I simply copy pasted the email, and >>>>> uploaded the script files there. >>>>> >>>>> Sincerely, >>>>> Sam >>>>> >>>>> On Mon, Sep 12, 2016 at 5:14 AM, Troels Emtekær Linnet < >>>>> tlin...@nmr-relax.com> wrote: >>>>> >>>>>> Hi Sam. >>>>>> >>>>>> Can you produce another bug report. >>>>>> >>>>>> Please don't attach files to these mails as it will strain the >>>>>> mailinglists. >>>>>> >>>>>> Cheers >>>>>> Troels >>>>>> >>>>>> >>>>>> Den lørdag den 10. september 2016 skrev Mahdi, Sam < >>>>>> sam.mahdi....@my.csun.edu>: >>>>>> >>>>>>> Hi Troels, >>>>>>> >>>>>>> Additional question that I had, if you could also look into this as >>>>>>> well on Tuesday please. I have decided to try to write a script to >>>>>>> automate >>>>>>> this whole process (since I won't be using the gui to do model free), >>>>>>> and >>>>>>> I've come across a problem. I can successfully open up relax using >>>>>>> openmpi, >>>>>>> and can load the pdb file, and assign all the spins and isotopes; >>>>>>> however, >>>>>>> it appears it will only load one data file (the very first one I'll have >>>>>>> inputed in the script). I don't know if there is a problem with how I >>>>>>> wrote >>>>>>> my script. Not only will it not load the rest of my data sets, it won't >>>>>>> actually run dAuvergne's protocol either, it'll just load the data set >>>>>>> and >>>>>>> exit out of the program. Attached is the script I wrote for relax. >>>>>>> >>>>>>> This is the output once relax has loaded >>>>>>> >>>>>>> script = 'model_free_sample_script.py' >>>>>>> ------------------------------------------------------------ >>>>>>> ---------------------------------------- >>>>>>> from time import asctime, localtime >>>>>>> from auto_analyses.dauvergne_protocol import dAuvergne_protocol >>>>>>> DIFF_MODEL=['local_tm','sphere','prolate','oblate','ellipsoi >>>>>>> d','final'] >>>>>>> MF_MODELS=['m0','m1','m2','m3','m4','m5','m6','m7','m8','m9'] >>>>>>> LOCAL_TM_MODELS=['tm0','tm1','tm2','tm3','tm4','tm5','tm6',' >>>>>>> tm7','tm7','tm8','tm9'] >>>>>>> GRID_INC=11 >>>>>>> MIN_ALGOR='newton' >>>>>>> MC_NUM=500 >>>>>>> CONV_LOOP=True >>>>>>> pipe_bundle="mf(%s)"%asctime(localtime()) >>>>>>> name="origin-"+pipe_bundle >>>>>>> pipe.create(name,'mf',bundle=pipe_bundle) >>>>>>> structure.read_pdb('2d9j.pdb',set_mol_name='hRGS7') >>>>>>> structure.load_spins('@N',ave_pos=True) >>>>>>> structure.load_spins('@NE1',ave_pos=True) >>>>>>> structure.load_spins('@H',ave_pos=True) >>>>>>> structure.load_spins('@HE1',ave_pos=True) >>>>>>> spin.isotope('15N',spin_id='@N*') >>>>>>> spin.isotope('1H',spin_id='@H*') >>>>>>> relax_data.read(ri_id='R1_Agnes',ri_type='R1',frq=599.642*1e6, >>>>>>> file='R1_Agnes',res_num_col=1,data_col=2,error_col=3) >>>>>>> relax_data.read(ri_id='R2_Agnes',ri_type='R2',frq=599.642*1e6, >>>>>>> file='R2_Agnes',res_num_col=1,data_col=2,error_col=3) >>>>>>> relax_data.read(ri_id='ssNOE_Agnes',ri_type='NOE',frq=599.642*1e6, >>>>>>> file='ssNOE_Agnes',res_num_col=1,data_col=2,error_col=3) >>>>>>> relax_data.read(ri_id='R1_NMRFAM',ri_type='R1',frq=799.642*1e6, >>>>>>> file='R1_NMRFAM',res_num_col=1,data_col=2,error_col=3) >>>>>>> relax_data.read(ri_id='R2_NMRFAM',ri_type='R2',frq=799.642*1e6, >>>>>>> file='R2_NMRFAM',res_num_col=1,data_col=2,error_col=3) >>>>>>> relax_data.read(ri_id='ssNOE_NMRFAM',ri_type='NOE',frq=799.642*1e6, >>>>>>> file='ssNOE_NMRFAM',res_num_col=1,data_col=2,error_col=3) >>>>>>> interatom.define(spin_id1='@N',spin_id2='@H', direct_bond=True) >>>>>>> interatom.define(spin_id1='@NE1',spin_id2='@HE1', direct_bond=True) >>>>>>> interatom.set_dist(spin_id1='@N*',spin_id2='@H*',ave_dist=1. >>>>>>> 02*1e-10) >>>>>>> interatom.unit_vectors() >>>>>>> value.set(-172*1e-6,'csa',spin_id='@N*') >>>>>>> dAuvergne_protocol(pipe_name=name,pipe_bundle=pipe_bundle,di >>>>>>> ff_model=DIFF_MODEL,mf_models=MF_MODELS,local_tm_models=LOCA >>>>>>> L_TM_MODELS,grid_inc=GRID_INC,min_algor=MIN_ALGOR,mc_sim_num >>>>>>> =MC_NUM,conv_loop=CONV_LOOP) >>>>>>> >>>>>>> So it indicates that my script has loaded. However, after it loads >>>>>>> the spins from the pdb file, this is what happens after my first data >>>>>>> set >>>>>>> has been loaded: >>>>>>> >>>>>>> relax> relax_data.read(ri_id='R1_Agnes', ri_type='R1', >>>>>>> frq=599642000.0, file='R1_Agnes', dir=None, spin_id_col=None, >>>>>>> mol_name_col=None, res_num_col=1, res_name_col=None, spin_num_col=None, >>>>>>> spin_name_col=None, data_col=2, error_col=3, sep=None, spin_id=None) >>>>>>> Opening the file 'R1_Agnes' for reading. >>>>>>> RelaxWarning: The sequence data in the line ['Residue', 'R1', >>>>>>> 'Error'] is invalid, the residue number data 'Residue' is invalid. >>>>>>> RelaxWarning: The sequence data in the line ['1'] is invalid, the >>>>>>> data is missing. >>>>>>> RelaxWarning: The sequence data in the line ['2'] is invalid, the >>>>>>> data is missing. >>>>>>> RelaxWarning: The sequence data in the line ['3'] is invalid, the >>>>>>> data is missing. >>>>>>> RelaxWarning: The sequence data in the line ['4'] is invalid, the >>>>>>> data is missing. >>>>>>> RelaxWarning: The sequence data in the line ['5'] is invalid, the >>>>>>> data is missing. >>>>>>> RelaxWarning: The sequence data in the line ['6'] is invalid, the >>>>>>> data is missing. >>>>>>> RelaxWarning: The sequence data in the line ['7'] is invalid, the >>>>>>> data is missing. >>>>>>> RelaxWarning: The sequence data in the line ['8'] is invalid, the >>>>>>> data is missing. >>>>>>> RelaxWarning: The sequence data in the line ['9'] is invalid, the >>>>>>> data is missing. >>>>>>> RelaxWarning: The sequence data in the line ['10'] is invalid, the >>>>>>> data is missing. >>>>>>> RelaxWarning: The sequence data in the line ['11'] is invalid, the >>>>>>> data is missing. >>>>>>> RelaxWarning: The sequence data in the line ['16'] is invalid, the >>>>>>> data is missing. >>>>>>> RelaxWarning: The sequence data in the line ['17'] is invalid, the >>>>>>> data is missing. >>>>>>> RelaxWarning: The sequence data in the line ['18'] is invalid, the >>>>>>> data is missing. >>>>>>> RelaxWarning: The sequence data in the line ['21'] is invalid, the >>>>>>> data is missing. >>>>>>> RelaxWarning: The sequence data in the line ['22'] is invalid, the >>>>>>> data is missing. >>>>>>> RelaxWarning: The sequence data in the line ['23'] is invalid, the >>>>>>> data is missing. >>>>>>> RelaxWarning: The sequence data in the line ['26'] is invalid, the >>>>>>> data is missing. >>>>>>> RelaxWarning: The sequence data in the line ['27'] is invalid, the >>>>>>> data is missing. >>>>>>> RelaxWarning: The sequence data in the line ['28'] is invalid, the >>>>>>> data is missing. >>>>>>> RelaxWarning: The sequence data in the line ['31'] is invalid, the >>>>>>> data is missing. >>>>>>> RelaxWarning: The sequence data in the line ['40'] is invalid, the >>>>>>> data is missing. >>>>>>> RelaxWarning: The sequence data in the line ['46'] is invalid, the >>>>>>> data is missing. >>>>>>> RelaxWarning: The sequence data in the line ['58'] is invalid, the >>>>>>> data is missing. >>>>>>> RelaxWarning: The sequence data in the line ['61'] is invalid, the >>>>>>> data is missing. >>>>>>> RelaxWarning: The sequence data in the line ['62'] is invalid, the >>>>>>> data is missing. >>>>>>> RelaxWarning: The sequence data in the line ['63'] is invalid, the >>>>>>> data is missing. >>>>>>> RelaxWarning: The sequence data in the line ['73'] is invalid, the >>>>>>> data is missing. >>>>>>> RelaxWarning: The sequence data in the line ['76'] is invalid, the >>>>>>> data is missing. >>>>>>> RelaxWarning: The sequence data in the line ['79'] is invalid, the >>>>>>> data is missing. >>>>>>> RelaxWarning: The sequence data in the line ['81'] is invalid, the >>>>>>> data is missing. >>>>>>> RelaxWarning: The sequence data in the line ['82'] is invalid, the >>>>>>> data is missing. >>>>>>> RelaxWarning: The sequence data in the line ['85'] is invalid, the >>>>>>> data is missing. >>>>>>> RelaxWarning: The sequence data in the line ['94'] is invalid, the >>>>>>> data is missing. >>>>>>> RelaxWarning: The sequence data in the line ['97'] is invalid, the >>>>>>> data is missing. >>>>>>> RelaxWarning: The sequence data in the line ['99'] is invalid, the >>>>>>> data is missing. >>>>>>> RelaxWarning: The sequence data in the line ['106'] is invalid, the >>>>>>> data is missing. >>>>>>> RelaxWarning: The sequence data in the line ['115'] is invalid, the >>>>>>> data is missing. >>>>>>> RelaxWarning: The sequence data in the line ['121'] is invalid, the >>>>>>> data is missing. >>>>>>> RelaxWarning: The sequence data in the line ['126'] is invalid, the >>>>>>> data is missing. >>>>>>> RelaxWarning: The sequence data in the line ['127'] is invalid, the >>>>>>> data is missing. >>>>>>> RelaxWarning: The sequence data in the line ['134'] is invalid, the >>>>>>> data is missing. >>>>>>> RelaxWarning: The sequence data in the line ['135'] is invalid, the >>>>>>> data is missing. >>>>>>> RelaxWarning: The sequence data in the line ['136'] is invalid, the >>>>>>> data is missing. >>>>>>> RelaxWarning: The sequence data in the line ['137'] is invalid, the >>>>>>> data is missing. >>>>>>> RelaxWarning: The sequence data in the line ['139'] is invalid, the >>>>>>> data is missing. >>>>>>> >>>>>>> RelaxError: The spin ID '#hRGS7:12' corresponds to multiple spins, >>>>>>> including '#hRGS7:12@N' and '#hRGS7:12@H'. >>>>>>> crowlab: [~/relax-4.0.2]> >>>>>>> >>>>>>> As you can see, I have all 6 data sets set to load, but only the >>>>>>> very first one appears to do so, and after it loads, it just exits out >>>>>>> of >>>>>>> relax. Again, I don't know if this is a problem with how I wrote the >>>>>>> script. The Relax_script1 is the one that I load up to run the whole >>>>>>> thing. >>>>>>> The model free script.py is just the script it reads once relax has >>>>>>> opened >>>>>>> up. Again, I can see all the spins are properly loaded, and the >>>>>>> isotopes >>>>>>> are set. It just everything after the first data set that doesn't load. >>>>>>> Thanks again in advance. >>>>>>> >>>>>>> Sincerely, >>>>>>> Sam >>>>>>> >>>>>>> On Thu, Sep 8, 2016 at 10:15 AM, Mahdi, Sam < >>>>>>> sam.mahdi....@my.csun.edu> wrote: >>>>>>> >>>>>>>> Hi Troels, >>>>>>>> >>>>>>>> Thank you so much. If there is any extra info you need please let >>>>>>>> me know. >>>>>>>> >>>>>>>> Sincerely, >>>>>>>> Sam >>>>>>>> >>>>>>>> On Thu, Sep 8, 2016 at 9:12 AM, Troels Emtekær Linnet < >>>>>>>> tlin...@nmr-relax.com> wrote: >>>>>>>> >>>>>>>>> Hi Sam. >>>>>>>>> >>>>>>>>> I will have some time on Tuesday, and then I will look at it. >>>>>>>>> >>>>>>>>> Best >>>>>>>>> Troels >>>>>>>>> >>>>>>>>> >>>>>>>>> Den onsdag den 7. september 2016 skrev Mahdi, Sam < >>>>>>>>> sam.mahdi....@my.csun.edu>: >>>>>>>>> >>>>>>>>>> Hello Troels, >>>>>>>>>> >>>>>>>>>> I uploaded all the files, and even added in the entire output >>>>>>>>>> that i recieved using model free in script mode. I didn't know if >>>>>>>>>> all the >>>>>>>>>> files uploaded need to have that link, so only the initial files >>>>>>>>>> that were >>>>>>>>>> uploaded it, have it. >>>>>>>>>> Thank you in advance for your help! >>>>>>>>>> Sincerely, >>>>>>>>>> Sam >>>>>>>>>> >>>>>>>>>> On Wed, Sep 7, 2016 at 12:41 AM, Troels Emtekær Linnet < >>>>>>>>>> tlin...@nmr-relax.com> wrote: >>>>>>>>>> >>>>>>>>>>> Hi Sam. >>>>>>>>>>> >>>>>>>>>>> You should be able to upload more files after the initial upload. >>>>>>>>>>> In the comment thread, please also make a link to this >>>>>>>>>>> discussion. >>>>>>>>>>> >>>>>>>>>>> https://mail.gna.org/public/relax-users/2016-09/threads.html >>>>>>>>>>> #00001 >>>>>>>>>>> >>>>>>>>>>> Best >>>>>>>>>>> Troels >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> 2016-09-06 19:10 GMT+02:00 Mahdi, Sam <sam.mahdi....@my.csun.edu >>>>>>>>>>> >: >>>>>>>>>>> >>>>>>>>>>>> Thank you for your reply. When I come to upload my data though, >>>>>>>>>>>> I see there are only 4 available slots I can upload my data. I >>>>>>>>>>>> have a total >>>>>>>>>>>> of 6 data files however, that need to be uploaded (3 of each >>>>>>>>>>>> frequency). I >>>>>>>>>>>> also need to upload the relax -i of 2 different computers, and the >>>>>>>>>>>> script >>>>>>>>>>>> file I've been using for a total of 9 files that need to be >>>>>>>>>>>> uploaded. Is >>>>>>>>>>>> there a way to increase the amount I can upload, or can I upload >>>>>>>>>>>> more after >>>>>>>>>>>> the initial submission? >>>>>>>>>>>> >>>>>>>>>>>> On Mon, Sep 5, 2016 at 2:46 AM, Troels Emtekær Linnet < >>>>>>>>>>>> tlin...@nmr-relax.com> wrote: >>>>>>>>>>>> >>>>>>>>>>>>> Hi Sam. >>>>>>>>>>>>> >>>>>>>>>>>>> To solve this problem, it would be easier to have access to >>>>>>>>>>>>> some of your data. >>>>>>>>>>>>> Can you upload to: https://gna.org/bugs/?group=relax >>>>>>>>>>>>> >>>>>>>>>>>>> Take each of your data files, and delete all data, except 2 >>>>>>>>>>>>> spins. >>>>>>>>>>>>> Also provide your script file, or a description of which >>>>>>>>>>>>> button you press in the GUI. >>>>>>>>>>>>> >>>>>>>>>>>>> Please also provide information about your system with: >>>>>>>>>>>>> relax -i >>>>>>>>>>>>> >>>>>>>>>>>>> Then I will make a tutorial for you. To be added here: >>>>>>>>>>>>> http://wiki.nmr-relax.com/Category:Tutorials >>>>>>>>>>>>> >>>>>>>>>>>>> If there is a problem in relax, I will write a systemtest >>>>>>>>>>>>> which will solve the problem. >>>>>>>>>>>>> And the problem will never return. >>>>>>>>>>>>> >>>>>>>>>>>>> If this a user error, the tutorial should help to prevent >>>>>>>>>>>>> this, and would be the first step before >>>>>>>>>>>>> adding/modifying the manual. >>>>>>>>>>>>> >>>>>>>>>>>>> Regarding using mpirun. >>>>>>>>>>>>> Have a look at this page. Maybe it helps. >>>>>>>>>>>>> http://wiki.nmr-relax.com/OpenMPI >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> Cheers. >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> 2016-09-03 4:13 GMT+02:00 Mahdi, Sam < >>>>>>>>>>>>> sam.mahdi....@my.csun.edu>: >>>>>>>>>>>>> >>>>>>>>>>>>>> Hello everyone, >>>>>>>>>>>>>> >>>>>>>>>>>>>> So I was able to set up and run the dauvergne_protocol >>>>>>>>>>>>>> successfully by >>>>>>>>>>>>>> using the script in the wiki. The problem I have come across >>>>>>>>>>>>>> now is the >>>>>>>>>>>>>> program doesn't seem to read my data. Using the gui interface >>>>>>>>>>>>>> I was able to >>>>>>>>>>>>>> successfully load my data and run it. When I upload my data >>>>>>>>>>>>>> using the >>>>>>>>>>>>>> script command: >>>>>>>>>>>>>> relax_data.read(ri_id='R1_Agnes',ri_type='R1',frq=599.642*1e >>>>>>>>>>>>>> 6, >>>>>>>>>>>>>> file='R1_Agnes',res_num_col=1,data_col=2,error_col=3) >>>>>>>>>>>>>> >>>>>>>>>>>>>> The output file simply gives errors for amino acids I don't >>>>>>>>>>>>>> have data for: >>>>>>>>>>>>>> RelaxWarning: The sequence data in the line ['1'] is invalid, >>>>>>>>>>>>>> the data is >>>>>>>>>>>>>> missing. >>>>>>>>>>>>>> >>>>>>>>>>>>>> This is fine as relax just ignores these values and continues >>>>>>>>>>>>>> its >>>>>>>>>>>>>> calculations. I only receive this warning for values I don't >>>>>>>>>>>>>> have data for. >>>>>>>>>>>>>> This is the same thing I got when using the gui interface >>>>>>>>>>>>>> (the gui however >>>>>>>>>>>>>> showed my values that I have data for and the residue it >>>>>>>>>>>>>> corresponds to, >>>>>>>>>>>>>> using the script I don't receive such an output, I don't know >>>>>>>>>>>>>> whether this >>>>>>>>>>>>>> is normal or not). However, since I don't get this warning >>>>>>>>>>>>>> for every amino >>>>>>>>>>>>>> acid, I assume this means it has read the values for the >>>>>>>>>>>>>> other amino acids. >>>>>>>>>>>>>> All of my data is the same, relax warnings only pop up for >>>>>>>>>>>>>> amino acids that >>>>>>>>>>>>>> I don't have data for. The problem is, when I enter the >>>>>>>>>>>>>> dAuvergne protocol, >>>>>>>>>>>>>> I get the protocol working, it starts running local_tm >>>>>>>>>>>>>> however it appears >>>>>>>>>>>>>> none of my data has been uploaded: >>>>>>>>>>>>>> RelaxWarning: The spin '#hRGS7:2@N' has been deselected >>>>>>>>>>>>>> because of missing >>>>>>>>>>>>>> relaxation data >>>>>>>>>>>>>> RelaxWarning: The spin '#hRGS7:3@N' has been deselected >>>>>>>>>>>>>> because of missing >>>>>>>>>>>>>> relaxation data >>>>>>>>>>>>>> >>>>>>>>>>>>>> And I get that warning for every single amino acid. From the >>>>>>>>>>>>>> output, it >>>>>>>>>>>>>> appears to have read the file since it knows exactly which >>>>>>>>>>>>>> amino acids I >>>>>>>>>>>>>> don't have data for, but I don't know why when it comes to >>>>>>>>>>>>>> running the >>>>>>>>>>>>>> protocol, it tells me I havn't inputed any data. I have typed >>>>>>>>>>>>>> everything >>>>>>>>>>>>>> directly according to the script from the wiki. From running >>>>>>>>>>>>>> the protoco, >>>>>>>>>>>>>> it appears everything has properly been uploaded, structure >>>>>>>>>>>>>> data, magnetic >>>>>>>>>>>>>> dipole interactions, csa, the data pipe, the analysis >>>>>>>>>>>>>> variables, the python >>>>>>>>>>>>>> module imports, and setting up the spins from the pdb file. >>>>>>>>>>>>>> It appears the >>>>>>>>>>>>>> only error is from loading the actual relaxation data. >>>>>>>>>>>>>> >>>>>>>>>>>>>> On a completely unrelated side note, I have been attempting >>>>>>>>>>>>>> to run relax on >>>>>>>>>>>>>> multiple processors. I have tried 2 different computers, both >>>>>>>>>>>>>> fedora linux. >>>>>>>>>>>>>> I have mpi4py and openmpi downloaded on both. On one, I can >>>>>>>>>>>>>> get relax on >>>>>>>>>>>>>> multiple cores working (havn't been able to successfully run >>>>>>>>>>>>>> it due to >>>>>>>>>>>>>> being unable to upload any data properly). On the other >>>>>>>>>>>>>> however, I type in >>>>>>>>>>>>>> the mpirun -np --multi='mpi4py' script, but I get no output. >>>>>>>>>>>>>> I can see that >>>>>>>>>>>>>> it's running in the background (top command), but nothing >>>>>>>>>>>>>> pops up, no text >>>>>>>>>>>>>> command, nothing. I typed the same mpirun with the --gui, but >>>>>>>>>>>>>> that opened >>>>>>>>>>>>>> up nothing. On a uni-processor (typing in the exact same >>>>>>>>>>>>>> command without >>>>>>>>>>>>>> indicating how many cores i.e. no -np --multi='mpi4py') it >>>>>>>>>>>>>> works just fine, >>>>>>>>>>>>>> so I don't think its my openmpi that's an issue. I don't know >>>>>>>>>>>>>> whether this >>>>>>>>>>>>>> is an issue with my mpi4py or a personal computer issue >>>>>>>>>>>>>> (since on the other >>>>>>>>>>>>>> computer relax runs just fine on multiple cores). >>>>>>>>>>>>>> >>>>>>>>>>>>>> Sincerely, >>>>>>>>>>>>>> Sam >>>>>>>>>>>>>> >>>>>>>>>>>>>> P.S. when I do enter the top command to see what's running. >>>>>>>>>>>>>> My master shows >>>>>>>>>>>>>> mpirun, and the 3 slaves display python when I put -np 4, so >>>>>>>>>>>>>> I know >>>>>>>>>>>>>> something is running in the background. I have 8 cores. >>>>>>>>>>>>>> >>>>>>>>>>>>>> On Wed, Aug 31, 2016 at 6:49 PM, Mahdi, Sam < >>>>>>>>>>>>>> sam.mahdi....@my.csun.edu> >>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>> > Hello everyone, >>>>>>>>>>>>>> > >>>>>>>>>>>>>> > I am attempting to run relax on a multi-processor mode. I >>>>>>>>>>>>>> have been able >>>>>>>>>>>>>> > to successfully set-up relax to operate in a >>>>>>>>>>>>>> multi-processor mode by using >>>>>>>>>>>>>> > the mpirun -np #ofprocessors /location/of/relax >>>>>>>>>>>>>> --multi='mpi4py' >>>>>>>>>>>>>> > >>>>>>>>>>>>>> > The problem I encounter is when using the --tee log >>>>>>>>>>>>>> dauvergne_protocol.py >>>>>>>>>>>>>> > command. I receive this error >>>>>>>>>>>>>> > RelaxError: the script file 'dauvergne_protocol.py' does >>>>>>>>>>>>>> not exist >>>>>>>>>>>>>> > >>>>>>>>>>>>>> > I located the script file and tried to direct to it's path >>>>>>>>>>>>>> > mpirun /usr/local/Relax/relax-2.2.5/relax --multi='mpi4py' >>>>>>>>>>>>>> --tee log >>>>>>>>>>>>>> > /usr/local/Relax/relax-2.2.5/a >>>>>>>>>>>>>> uto-analyses/dauvergne_protocol.py >>>>>>>>>>>>>> > >>>>>>>>>>>>>> > But i received this error >>>>>>>>>>>>>> > RelaxError: the script file '/usr/local/Relax/relax-2.2.5/ >>>>>>>>>>>>>> > auto-analyses/dauvergne_protocol.py' does not exist. >>>>>>>>>>>>>> > >>>>>>>>>>>>>> > Even though I have the script, it doesn't seem to be able >>>>>>>>>>>>>> to locate it. >>>>>>>>>>>>>> > >>>>>>>>>>>>>> > On a side note, in the manual, one dash doesn't actually >>>>>>>>>>>>>> run the command. >>>>>>>>>>>>>> > I.e. in the manual it displays -multi='mpi4py' . What it >>>>>>>>>>>>>> should be is >>>>>>>>>>>>>> > --multi='mpi4py' . The same goes for -tee. It should be >>>>>>>>>>>>>> --tee. >>>>>>>>>>>>>> > >>>>>>>>>>>>>> > Sincerely, >>>>>>>>>>>>>> > Sam >>>>>>>>>>>>>> > >>>>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>>>> relax (http://www.nmr-relax.com) >>>>>>>>>>>>>> >>>>>>>>>>>>>> This is the relax-users mailing list >>>>>>>>>>>>>> relax-users@gna.org >>>>>>>>>>>>>> >>>>>>>>>>>>>> To unsubscribe from this list, get a password >>>>>>>>>>>>>> reminder, or change your subscription options, >>>>>>>>>>>>>> visit the list information page at >>>>>>>>>>>>>> https://mail.gna.org/listinfo/relax-users >>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>>>> >>>>>>> >>>>> >>>> >>> > _______________________________________________ relax (http://www.nmr-relax.com) This is the relax-users mailing list relax-users@gna.org To unsubscribe from this list, get a password reminder, or change your subscription options, visit the list information page at https://mail.gna.org/listinfo/relax-users
