On Sat, 2019-01-05 at 11:18 -0800, John Oliver wrote: > On Tue, Jan 01, 2019 at 10:43:03AM -0800, John Oliver wrote: > > I'm trying to get this scanner working, and am having zero luck. > > According to the supported scanners page, I should be using the > > PIXMA > > backend, but that requires BJNP, and an nmap says that port is not > > open, > > and suggests I should be using MFNP, but PIXMA says you *must* use > > BJNP, > > so... > > > > joliver@blinky:~$ !610 > > sudo nmap -sU -p 8610-8612 192.168.0.20 > > > > Starting Nmap 7.60 ( https://nmap.org ) at 2019-01-01 11:39 MST > > Nmap scan report for 192.168.0.20 > > Host is up (0.050s latency). > > > > PORT STATE SERVICE > > 8610/udp open|filtered canon-mfnp > > 8611/udp closed canon-bjnp1 > > 8612/udp closed canon-bjnp2 > > MAC Address: 80:A5:89:BD:C7:39 (AzureWave Technology) > > > > Nmap done: 1 IP address (1 host up) scanned in 2.01 seconds > > I've attached a small dump showing that there is communication > happening, but the scanner still isn't seen / recognized. > My apologies for the late response. The traces look ok. Looking at the source code, I guess that the MF416 is not yet supported. @Rolf Bensch, could you please have a look if you can add the MF416?
BR, Louis -- sane-devel mailing list: sane-devel@alioth-lists.debian.net https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/sane-devel Unsubscribe: Send mail with subject "unsubscribe your_password" to sane-devel-requ...@lists.alioth.debian.org