Hi, can you try to start it as
scanimage -d hp 1>test.pnm 2>errors.255 Sincerely Peter Franz Bakan schrieb: > Hi, > > here's a errorlog from a guy trying to use a HP-Scanner with > current SANE-version: > > Scanner is HP 4C > Adapter is Adaptec 2940U/UW > Sane-Version is 1.0.9 > Content of hp.conf is: > ---cut--- > b1t5l0 > ---cut--- > > > scanimage -d hp:b1t5l0 1>test.pnm 2>errors.255 > fails on OS/2 with the following errorlog: > > [sanei_debug] Setting debug level of hp to 255. > [hp] sane_init called > [hp] sane_init will finish with Success > [hp] sane_open called > [hp] hp_read_config: hp backend v0.96 starts reading config file > [hp] hp_read_config: processing line <b1t5l0> > [hp] hp_read_config: attach b1t5l0 > [hp] hp_get_dev: New device b1t5l0, connect-scsi, scsi-request=1 > [hp] sanei_hp_device_new: b1t5l0 > [sanei_debug] Setting debug level of sanei_scsi to 255. > ... > [sanei_scsi] OS/2: adapter#01 '2940U/UW/A/T/D' > [sanei_scsi] OS/2: id#00 status=82h > [sanei_scsi] OS/2: id#01 status=82h > [sanei_scsi] OS/2: id#02 status=01h > [sanei_scsi] OS/2: type is 'CD-drive' > [sanei_scsi] OS/2 'PIONEER DVD-ROM DVD-303R2.00 1999/12/16PIONEER ' > [sanei_scsi] OS/2: id#03 status=82h > [sanei_scsi] OS/2: id#04 status=82h > [sanei_scsi] OS/2: id#05 status=01h > [sanei_scsi] OS/2: type is 'processor' > [sanei_scsi] OS/2 'HP C1130A 3540 1999/12/16PIONEER ' > [sanei_scsi] OS/2: id#06 status=01h > [sanei_scsi] OS/2: type is 'CD-drive' > [sanei_scsi] OS/2 'YAMAHA CRW4260 1.0q30/10/98/16PIONEER ' > [sanei_scsi] open_aspi: close temporary file 'asa00309' > [hp] scsi_inquire: sending INQUIRE > [sanei_scsi] sanei_scsi_cmd: Reading srb.u.cmd.data_len= 36 > [hp] scsi_new: sending TEST_UNIT_READY > [sanei_scsi] sanei_scsi_cmd: Writing srb.u.cmd.data_len= 0 > [hp] scsi_flush: writing 2 bytes: > [hp] 0x0000 1B 45 .E > ... > [hp] probing ScanJet IIcx > [hp] scsi_flush: writing 6 bytes: > [hp] 0x0000 1B 2A 73 31 31 45 .*s11E > [sanei_scsi] sanei_scsi_cmd: Writing srb.u.cmd.data_len= 6 > [sanei_scsi] sanei_scsi_cmd: Reading srb.u.cmd.data_len= 24 > [hp] scsi_read: 24 bytes: > [hp] 0x0000 1B 2A 73 31 31 64 4E 00 31 39 35 41 18 00 00 00 > .*s11dN.195A.... > [hp] 0x0010 43 31 31 33 30 41 20 20 C1130A > [hp] scl_inq: parameter 11 unsupported > [hp] probing ScanJet 3c/4c/6100C > [hp] scsi_flush: writing 6 bytes: > [hp] 0x0000 1B 2A 73 31 32 45 .*s12E > [sanei_scsi] sanei_scsi_cmd: Writing srb.u.cmd.data_len= 6 > [sanei_scsi] sanei_scsi_cmd: Reading srb.u.cmd.data_len= 24 > [hp] scsi_read: 24 bytes: > [hp] 0x0000 1B 2A 73 31 32 64 4E 00 31 39 35 41 18 00 00 00 > .*s12dN.195A.... > [hp] 0x0010 43 31 31 33 30 41 20 20 C1130A > [hp] scl_inq: parameter 12 unsupported > [hp] probing ScanJet 3p > ... > [hp] probe_scanner: Probing b1t5l0 > [hp] probe_scanner: use cached compatibility flags > [hp] start: No request to mirror image vertically > [hp] sanei_hp_optset_scan_type: scantype=0 > [hp] start: No request to mirror image vertically > [hp] start: 2550 pixels per line, 319 bytes per line, 4199 lines high > [hp] sanei_hp_scl_startScan: Start scan > [hp] scsi_flush: writing 5 bytes: > [hp] 0x0000 1B 2A 66 30 53 .*f0S > [sanei_scsi] sanei_scsi_cmd: Writing srb.u.cmd.data_len= 5 > [hp] sanei_hp_get_connect: Could not get info for b1t5l0. Assume SCSI > Assertion failed: info, file hp-scl.c, line 1317 > > Abnormal program termination > ... > > Any hint what to do? > Complete errorlog available on request. > > Regards, > Franz > > > _______________________________________________ > Sane-devel mailing list > sane-de...@www.mostang.com > http://www.mostang.com/mailman/listinfo/sane-devel > -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net