--Boundary-00=_nYfiC8oKLxXx0nr Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit
I looked at sg0 & sg1 and all they contain is cdwriter nothing else. And "sane debug coolscan2=255 scanimage -L" bash says command not found. On Tuesday 17 May 2005 02:04 am, you wrote: > > I hope that it is ok to post this here, if not let me know. I installed > > ftp://rpmfind.net/linux/Mandrake/10.2/SRPMS/main/sane-1.0.15-7mdk.src.rpm > > and the dependancies and everything seemed to install properly. When I > > run the program from either the GUI interface or the command line or > > sane-find-scanner it fails to find anything. My system is seeing the SCSI > > interface which the scanner is attached to. Is there something I'm > > missing. Any help would be greatly appreciated. > > Make sure that the user running scanimage/xsane/xscanimage has > read/write permissions to the scanner's device file > (/dev/sg*). There's no need to change any configuration files, the > default must work just fine. > > If this fails, please post the output of "SANE_DEBUG_COOLSCAN2=255 > scanimage -L". > > Andras -- open source takes the bullshit out of software kernel 2.6.4 Mandriva 10.1 registered linux user: 389950 --Boundary-00=_nYfiC8oKLxXx0nr Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: 7bit <html><head><meta name="qrichtext" content="1" /></head><body style="font-size:10pt;font-family:Sans"> <p><span style="font-size:12pt">I looked at sg0 & sg1 and all they contain is cdwriter nothing else. And "sane debug coolscan2=255 scanimage -L" bash says command not found.</span></p> <p></p> <p>On Tuesday 17 May 2005 02:04 am, you wrote:</p> <p>> > I hope that it is ok to post this here, if not let me know. I installed</p> <p>> > ftp://rpmfind.net/linux/Mandrake/10.2/SRPMS/main/sane-1.0.15-7mdk.src.rpm</p> <p>> > and the dependancies and everything seemed to install properly. When I</p> <p>> > run the program from either the GUI interface or the command line or</p> <p>> > sane-find-scanner it fails to find anything. My system is seeing the SCSI</p> <p>> > interface which the scanner is attached to. Is there something I'm</p> <p>> > missing. Any help would be greatly appreciated.</p> <p>></p> <p>> Make sure that the user running scanimage/xsane/xscanimage has</p> <p>> read/write permissions to the scanner's device file</p> <p>> (/dev/sg*). There's no need to change any configuration files, the</p> <p>> default must work just fine.</p> <p>></p> <p>> If this fails, please post the output of "SANE_DEBUG_COOLSCAN2=255</p> <p>> scanimage -L".</p> <p>></p> <p>> Andras</p> <p></p> <p>-- </p> <p>open source takes the bullshit out of software</p> <p>kernel 2.6.4 Mandriva 10.1</p> <p>registered linux user: 389950</p> </body></html> --Boundary-00=_nYfiC8oKLxXx0nr--