Martin, No, sorry, the information which Marcus Meissner needs, is here.
Marcus, This is what Martin used in order to get the camera to work. The Vendor:Product number is based upon the output of lsusb -v, which Martin previously posted to me and to the sane-devel list. So at this point it looks to me as though we knocked down another one. Cheers, Theodore Kilgore On Wed, 14 Sep 2005, Martin wrote: > I installed libgphoto2-2.1.6. > > Edited the source file pdc640.c in the directory, > libgphoto2-2.1.6/camlibs/polaroid/ > > and added the lines, > > {"Clever CAM 360", 0x797, 0x8001, { > jd350e, > BAYER_TILE_BGGR, > &jd350e_postprocessing_and_flip, > "scope%04i.ppm" > } > }, > > which is similar to the lines already there for, > {"GrandTek ScopeCam", 0x797, 0x801c, { > jd350e, > BAYER_TILE_BGGR, > &jd350e_postprocessing_and_flip, > "scope%04i.ppm" > } > }, > > > and did a make and make install. > > What is the method to test this to see if I can gain access to the pictures > in the camera? > Thanks, > -Martin > > > kilg...@banach.math.auburn.edu wrote: > >> >> >> On Tue, 13 Sep 2005, Martin wrote: >> >>> I don't have this folder on my system, libgphoto2/camlibs/ >>> >>> Does something have to be installed to have it? >>> >> >> Well, yes. You need to go to gphoto.org and click on download, which will >> take you to the actual project page. There, you will have a couple of >> choices. Either you can download the libgphoto2-2.1.6 source tarball, or >> you should download the CVS tree for ligphoto2, which reflects the daily >> updates of the developers. I would say it is always better to get the CVS >> tree in a situation like this, but then there is an extra step for >> compiling. >> >