=========================================== == Neuer Eintrag ===========================================
------------------------------------------- -- Formular: 'adddev' ------------------------------------------- 1. Your email address: 'sclifcon at ase.md' 2. Manufacturer (e.g. "Mustek"): 'BENQ' 3. Model name (e.g. ScanExpress 1200UB): 'SCANNER 5550' 4. Bus type: 'USB' 5. Vendor id (e.g. 0x001): '0x04a5' 6. Product id (e.g. 0x0002): '0x2211' 7. Chipset (e.g. lm9831): 'RTS8822L-01H' 8. Comments (e.g. similar to Mustek 1234): 'I tried to use settings for hp 3900 (it use this chipset) but no results, my system is Debian lenny with full update. Other scanner like Geinus ColorPage HR7 works fine' 9. Data (e.g. sane-find-scanner -v -v): 'b520-2:/etc/udev# sane-find-scanner -v -v This is sane-find-scanner from sane-backends 1.0.18-cvs # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. searching for SCSI scanners: checking /dev/scanner... failed to open (Invalid argument) checking /dev/sg0... failed to open (Invalid argument) checking /dev/sg1... failed to open (Invalid argument) checking /dev/sg2... failed to open (Invalid argument) checking /dev/sg3... failed to open (Invalid argument) checking /dev/sg4... failed to open (Invalid argument) checking /dev/sg5... failed to open (Invalid argument) checking /dev/sg6... failed to open (Invalid argument) checking /dev/sg7... failed to open (Invalid argument) checking /dev/sg8... failed to open (Invalid argument) checking /dev/sg9... failed to open (Invalid argument) checking /dev/sga... failed to open (Invalid argument) checking /dev/sgb... failed to open (Invalid argument) checking /dev/sgc... failed to open (Invalid argument) checking /dev/sgd... failed to open (Invalid argument) checking /dev/sge... failed to open (Invalid argument) checking /dev/sgf... failed to open (Invalid argument) checking /dev/sgg... failed to open (Invalid argument) checking /dev/sgh... failed to open (Invalid argument) checking /dev/sgi... failed to open (Invalid argument) checking /dev/sgj... failed to open (Invalid argument) checking /dev/sgk... failed to open (Invalid argument) checking /dev/sgl... failed to open (Invalid argument) checking /dev/sgm... failed to open (Invalid argument) checking /dev/sgn... failed to open (Invalid argument) checking /dev/sgo... failed to open (Invalid argument) checking /dev/sgp... failed to open (Invalid argument) checking /dev/sgq... failed to open (Invalid argument) checking /dev/sgr... failed to open (Invalid argument) checking /dev/sgs... failed to open (Invalid argument) checking /dev/sgt... failed to open (Invalid argument) checking /dev/sgu... failed to open (Invalid argument) checking /dev/sgv... failed to open (Invalid argument) checking /dev/sgw... failed to open (Invalid argument) checking /dev/sgx... failed to open (Invalid argument) checking /dev/sgy... failed to open (Invalid argument) checking /dev/sgz... failed to open (Invalid argument) # No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter. searching for USB scanners: checking /dev/usb/scanner... failed to open (Invalid argument) checking /dev/usb/scanner0... failed to open (Invalid argument) checking /dev/usb/scanner1... failed to open (Invalid argument) checking /dev/usb/scanner2... failed to open (Invalid argument) checking /dev/usb/scanner3... failed to open (Invalid argument) checking /dev/usb/scanner4... failed to open (Invalid argument) checking /dev/usb/scanner5... failed to open (Invalid argument) checking /dev/usb/scanner5... failed to open (Invalid argument) checking /dev/usb/scanner7... failed to open (Invalid argument) checking /dev/usb/scanner8... failed to open (Invalid argument) checking /dev/usb/scanner9... failed to open (Invalid argument) checking /dev/usb/scanner10... failed to open (Invalid argument) checking /dev/usb/scanner11... failed to open (Invalid argument) checking /dev/usb/scanner12... failed to open (Invalid argument) checking /dev/usb/scanner13... failed to open (Invalid argument) checking /dev/usb/scanner14... failed to open (Invalid argument) checking /dev/usb/scanner15... failed to open (Invalid argument) checking /dev/usbscanner... failed to open (Invalid argument) checking /dev/usbscanner0... failed to open (Invalid argument) checking /dev/usbscanner1... failed to open (Invalid argument) checking /dev/usbscanner2... failed to open (Invalid argument) checking /dev/usbscanner3... failed to open (Invalid argument) checking /dev/usbscanner4... failed to open (Invalid argument) checking /dev/usbscanner5... failed to open (Invalid argument) checking /dev/usbscanner6... failed to open (Invalid argument) checking /dev/usbscanner7... failed to open (Invalid argument) checking /dev/usbscanner8... failed to open (Invalid argument) checking /dev/usbscanner9... failed to open (Invalid argument) checking /dev/usbscanner10... failed to open (Invalid argument) checking /dev/usbscanner11... failed to open (Invalid argument) checking /dev/usbscanner12... failed to open (Invalid argument) checking /dev/usbscanner13... failed to open (Invalid argument) checking /dev/usbscanner14... failed to open (Invalid argument) checking /dev/usbscanner15... failed to open (Invalid argument) trying libusb: <device descriptor of 0x04a5/0x2211 at 002:006 ( Color FlatbedScanner39)> bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x04A5 idProduct 0x2211 bcdDevice 1.00 iManufacturer 1 () iProduct 2 (Color FlatbedScanner39) iSerialNumber 0 () bNumConfigurations 1 <configuration 0> bLength 9 bDescriptorType 2 wTotalLength 39 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 4 (USB SCANNER) bmAttributes 224 (Self-poweredRemote Wakeup) MaxPower 2 mA <interface 0> <altsetting 0> bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 bInterfaceSubClass 0 bInterfaceProtocol 255 iInterface 5 (Bulk-In, Bulk-Out, Interrupt Interface) <endpoint 0> bLength 7 bDescriptorType 5 bEndpointAddress 0x81 (in 0x01) bmAttributes 2 (bulk) wMaxPacketSize 512 bInterval 0 ms bRefresh 0 bSynchAddress 0 <endpoint 1> bLength 7 bDescriptorType 5 bEndpointAddress 0x02 (out 0x02) bmAttributes 2 (bulk) wMaxPacketSize 512 bInterval 0 ms bRefresh 0 bSynchAddress 0 <endpoint 2> bLength 7 bDescriptorType 5 bEndpointAddress 0x83 (in 0x03) bmAttributes 3 (interrupt) wMaxPacketSize 1 bInterval 12 ms bRefresh 0 bSynchAddress 0 <trying to find out which USB chip is used> checking for GT-6801 ... this is not a GT-6801 (bDeviceClass = 0) checking for GT-6816 ... this is not a GT-6816 (bcdUSB = 0x200) checking for GT-8911 ... this is not a GT-8911 (check 2, bcdUSB = 0x200) checking for MA-1017 ... this is not a MA-1017 (bDeviceClass = 0, bInterfaceClass = 255) checking for MA-1015 ... this is not a MA-1015 (bDeviceClass = 0) checking for MA-1509 ... this is not a MA-1509 (bDeviceClass = 0) checking for LM983[1,2,3] ... this is not a LM983x (bcdUSB = 0x200) checking for GL646 ... this is not a GL646 (bDeviceClass = 0, bInterfaceClass = 255) checking for GL646_HP ... this is not a GL646_HP (bDeviceClass = 0, bInterfaceClass = 255) checking for GL660+GL646 ... this is not a GL660+GL646 (bDeviceClass = 0, bInterfaceClass = 255) checking for GL841 ... this is not a GL841 (bDeviceClass = 0, bInterfaceClass = 255) checking for ICM532B ... this is not a ICM532B (check 1, bDeviceClass = 0, bInterfaceClass = 255) checking for PV8630/LM9830 ... this is not a PV8630/LM9830 (bcdUSB = 0x200) checking for M011 ... this is not a M011 (bDeviceClass = 0) checking for RTS8822L-01H ... <This USB chip looks like a RTS8822L-01H (result from sane-backends 1.0.18-cvs)> found USB scanner (vendor=0x04a5 [], product=0x2211 [Color FlatbedScanner39], chip=RTS8822L-01H) at libusb:002:006 <device descriptor of 0x0000/0x0000 at 002:001 (Linux 2.6.22-rc5-k7 ehci_hcd EHCI Host Controller)> bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 bDeviceSubClass 0 bDeviceProtocol 1 bMaxPacketSize0 64 idVendor 0x0000 idProduct 0x0000 bcdDevice 2.06 iManufacturer 3 (Linux 2.6.22-rc5-k7 ehci_hcd) iProduct 2 (EHCI Host Controller) iSerialNumber 1 (0000:00:02.1) bNumConfigurations 1 <configuration 0> bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 () bmAttributes 224 (Self-poweredRemote Wakeup) MaxPower 0 mA <interface 0> <altsetting 0> bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 () <endpoint 0> bLength 7 bDescriptorType 5 bEndpointAddress 0x81 (in 0x01) bmAttributes 3 (interrupt) wMaxPacketSize 4 bInterval 12 ms bRefresh 0 bSynchAddress 0 <device descriptor of 0x0000/0x0000 at 001:001 (Linux 2.6.22-rc5-k7 ohci_hcd OHCI Host Controller)> bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0000 idProduct 0x0000 bcdDevice 2.06 iManufacturer 3 (Linux 2.6.22-rc5-k7 ohci_hcd) iProduct 2 (OHCI Host Controller) iSerialNumber 1 (0000:00:02.0) bNumConfigurations 1 <configuration 0> bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 () bmAttributes 224 (Self-poweredRemote Wakeup) MaxPower 0 mA <interface 0> <altsetting 0> bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 () <endpoint 0> bLength 7 bDescriptorType 5 bEndpointAddress 0x81 (in 0x01) bmAttributes 3 (interrupt) wMaxPacketSize 2 bInterval 255 ms bRefresh 0 bSynchAddress 0 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. done'