> > Ralf Haueisen schrieb: > > Hi all. > > > > I am just working to get my Canon LiDE 90 working. I took in the > > genesys_devices.c the LiDE60 an did some changes. I have a sniffer > > log taken with usbsnoop. Some registers i could firgue out where to > > set them. The image still looks like data is somehow scrambled. There > > are some setting in the file for the DAC. (static > > Genesys_Frontend Wolfson[] ) to which registers do these data belong? > > > > TIA, > > Ralf > > The settings in the Genesys_Frontend structs go to the analog frontend > via the serial interface at registers 0x3a/0x3b(FEWRDATA)+0x51(FEWRA), > through sanei_genesys_fe_write_data. > > If you are receiving noise data, this may indicate that the byte order > was swapped. You should check that the parallel interface to the > frontend is setup correctly(registers 0x52 to 0x57). > > HTH, > Pierre >
Hi Pierre. The registers 0x52 to 0x57 are not set by the windows software. If I set 0x52 to 0x05, 0x53 to 0x07 and 0x54-0x57 to 0x00 i get some image. If all registers are zero there is only noise. So it seems this is the point where i have to play. But I have no idea what to do. Ralf _______________________________________________________________________ Jetzt neu! Sch?tzen Sie Ihren PC mit McAfee und WEB.DE. 3 Monate kostenlos testen. http://www.pc-sicherheit.web.de/startseite/?mc=022220