I'm wondering about my NeatReceipts Portable sheetfed scanner, USB idVendor 07b3, idProduct 0462. Scans from XSane are comming in too light and off contrast with the stock XSane 0.996. I use the following site to get it recognized:
http://foss.bourgassociates.com Anyone have any ideas? On 3/16/09, Pierre Willenbrock <pierre at pirsoft.dnsalias.org> wrote: > Hi Jack, > > Jack McGill schrieb: > > > To list and Pierre, > > > > I recently received a Visioneer XP100, rev 3, usb vid x04a7 pid > > 0x049b, which has a GL842 chip inside. The model number on the > > bottom of the scanner is 85-0110-200. This scanner works very well > > using the Visioneer Roadwarrior settings. I think they are identical > > twins ;-). Pierre, can you add this scanner to the cvs? > > > Thanks for testing. > > > > Also, I have a Pentax DS Mobile 600 that works pretty well using > > the Visioneer Roadwarrior settings. I am going to tweak some of the > > settings, before I ask to have this added to cvs. > > > > I will be getting a DocketPort 485 in a couple of days. This is an > > A4, duplex scanner. I will try it out using the XP300 settings and > > report back. > > > > Also, if anyone else wants to try out their GL84x sheetfed scanner, > > 8 bit depth scanning is not working, but 16 bit scanning is working. > > Pierre recommends the following scanning command: > > > > scanimage -x440 -y50 --resolution 75 --mode color --depth 16 > > --disable-interpolation=yes > img.pnm > > > The 8 bit scanning problem should be fixed in CVS(Bad generic gamma > table), so --depth 16 can be dropped. (And --disable-interpolation=yes > is there by mistake.) > > Regards, > > Pierre > > > -- > sane-devel mailing list: sane-devel at lists.alioth.debian.org > http://lists.alioth.debian.org/mailman/listinfo/sane-devel > Unsubscribe: Send mail with subject "unsubscribe your_password" > to sane-devel-request at lists.alioth.debian.org > -- Kelly "STrRedWolf" Price http://strredwolf.furrynet.com
