On Sat, 17 Jul 2010 14:44:00 +0200 Nicolas Martin <nicolas0martin at gmail.com> wrote:
> Matthias, before I commit the changes and update the docs, did you try > the ADF and ADF duplex features, and do they work fine ? (remember to > set 2 pages to scan per sheet of paper in ADF when in duplex mode) First test was "ADF Duplex" but I forgot to set the page-count to 2, then the printer stopped after 1 page but the paper was still in the feeder. (waiting for the "reverse feeder") After that the scanner/printer worked fine via the Display, but I couldn't connect to the scanner. ERROR: [pixma] pixma_collect_devices() found Canon PIXMA MX870 at bjnp://canon.saberhagen:8612 [pixma] pixma_open(): Canon PIXMA MX870 [pixma] sanei_bjnp_open(bjnp://canon.saberhagen:8612, 16843009): [pixma] bjnp_allocate_device(bjnp://canon.saberhagen:8612)[pixma] udp_command: Sending UDP command to 10.0.0.101:8612 [pixma] bjnp_open_tcp: Can not connect to scanner: Connection refused [pixma] pixma_connect() failed EINVAL [pixma] pixma_open() failed EINVAL [pixma] pixma_close(): Canon PIXMA MX870 scanimage: open of device pixma:MX870_canon.saberhage failed: Invalid argument Scanimage logfiles: http://files.pannek.de/sane/scanimage2.zip Nmap scan report for canon.saberhagen (10.0.0.101) Host is up (0.0051s latency). Not shown: 9992 closed ports PORT STATE SERVICE 137/udp open netbios-ns 138/udp open|filtered netbios-dgm 500/udp open|filtered isakmp 3702/udp open|filtered unknown 5353/udp open zeroconf 8611/udp open unknown 8612/udp open unknown 8613/udp open unknown MAC Address: 00:1E:8F:99:BD:B7 (Canon) I turned the power off and on....same problem. Then i unplugged the scanner for ~10 seconds and it worked again. Now for the test (xsane): Flatbed: working fine (preview/scan/cancel/....) up to 2400 DPI. ADF: Working until 600 DPI, i tried it with 1200 DPI and i just got a "Error during read: Error during device I/O". Error and the scanner stuck with a "Processing..." message until Power off/on. (I know, max ADF resolution is 600 DPI) ADF without a paper in the feeder: Error message "Error during read: Document feeder out of documents". But the scanner itself is stuck with the "Processing..." screen. After 5 minutes still at processing, seems there is no timeout for this. The abort key don't work, so only Power off/on helps again. ADF Duplex 600 DPI (page count 2): working fine without a problem. This should be all :-) Thanks, Matthias