Hello, I've some trouble with my Epson-MFP Stylus DX3850. Local connected it works fine in scanner-mode (also as printer ;) ), but connectet to my second Fritzbox-Router (modded with Freetz), there is a Problem:
First Try after Box-Start and Epson-Start works fine. Second Try (Box allways on, Scanner newly switched on) starts the xsane- scanner-choice (I installed both epson-modules on the box), but crashes with an error like "Error during I/O..." Third Try brings only a box "no device found" Here is the actual log of second and third try: root at fritz:/var/mod/root# SANE_DEBUG_EPSON2=128 saned -d128 [saned] main: starting debug mode (level 128) [saned] read_config: searching for config file [saned] read_config: done reading config [saned] saned (AF-indep+IPv6) from sane-backends 1.0.21 starting up [saned] do_bindings: trying to get port for service "sane-port" (getaddrinfo) [saned] do_bindings: " sane-port " service unknown on your host; you should add [saned] do_bindings: sane-port 6566/tcp saned # SANE network scanner daemon [saned] do_bindings: to your /etc/services file (or equivalent). Proceeding anyway. [saned] do_bindings: [0] socket () using IPv6 [saned] do_bindings: [0] setsockopt () [saned] do_bindings: [0] bind () to port 6566 [saned] do_bindings: [0] listen () [saned] do_bindings: [1] socket () using IPv4 [saned] do_bindings: [1] setsockopt () [saned] do_bindings: [1] bind () to port 6566 [saned] do_bindings: [1] bind failed: Address already in use [saned] run_standalone: waiting for control connection [saned] handle_connection: processing client connection [saned] check_host: detected an IPv4-mapped address [saned] check_host: access by remote host: ::ffff:192.168.1.8 [saned] check_host: remote host is not IN_LOOPBACK nor IN6_LOOPBACK [saned] check_host: local hostname: fritz.fonwlan.box [saned] check_host: local hostname(s) (from DNS): fritz.box [saned] check_host: local hostname(s) (from DNS): fritz.box [saned] check_host: local hostname(s) (from DNS): fritz.box [saned] check_host: remote host doesn't have same addr as local [saned] check_host: opening config file: /etc/hosts.equiv [saned] check_host: can't open config file: /etc/hosts.equiv (No such file or directory) [saned] check_host: opening config file: saned.conf [saned] check_host: config file line: `192.168.1.0/24' [saned] check_host: subnet with base IP = 192.168.1.0, CIDR netmask = 24 [saned] check_host: access granted from IP address 192.168.1.8 (in subnet 192.168.1.0/24) [saned] init: access granted [saned] init: access granted to saned-user@::ffff:192.168.1.8 [saned] process_request: waiting for request [saned] process_request: got request 1 [sanei_debug] Setting debug level of epson2 to 128. [epson2] sane_epson2_init: sane-backends 1.0.21 [epson2] epson2 backend, version 1.0.124 [epson2] sane_epson2_get_devices [epson2] probe_devices [epson2] free_devices [epson2] attach_one_config: len = 10, line = scsi EPSON [epson2] attach_one_config: len = 3, line = usb [epson2] attach_one_usb: dev = libusb:001:010 [epson2] attach: devname = libusb:001:010, type = 3 [epson2] e2_dev_init [epson2] open_scanner: libusb:001:010 [epson2] scanner opened [epson2] found valid Epson scanner: 0x4b8/0x818 (vendorID/productID) [epson2] e2_set_model: model is 'generic' [epson2] esci_reset [epson2] e2_cmd_simple: size = 2 [epson2] e2_send: size = 2, reply = 1 [epson2] e2_send: ESC @ [epson2] buf[0] 1b . [epson2] buf[1] 40 @ [epson2] e2_send: cmd count, r = 0, w = 1 [epson2] e2_recv: size = 1, buf = 0x7fa473c0 [epson2] e2_recv: cmd count, r = 1, w = 1 [epson2] buf[0] 06 . [epson2] e2_discover_capabilities [epson2] esci_request_identity [epson2] e2_cmd_info_block, params len = 2, reply len = 0, buf = 0x7fa47388 [epson2] e2_send: size = 2, reply = 0 [epson2] e2_send: ESC I [epson2] buf[0] 1b . [epson2] buf[1] 49 I [epson2] e2_send: cmd count, r = 1, w = 2 [epson2] e2_recv: size = 4, buf = 0x7fa472c4 [epson2] e2_recv: cmd count, r = 2, w = 2 [epson2] buf[0] 02 . [epson2] buf[1] 02 . [epson2] buf[2] 13 . [epson2] buf[3] 00 . [epson2] e2_recv_info_block: payload length: 19 [epson2] e2_recv: size = 19, buf = 0x421628 [epson2] e2_recv: cmd count, r = 3, w = 2 [epson2] buf[0] 44 D [epson2] buf[1] 37 7 [epson2] buf[2] 52 R [epson2] buf[3] 4b K [epson2] buf[4] 00 . [epson2] buf[5] 52 R [epson2] buf[6] 96 . [epson2] buf[7] 00 . [epson2] buf[8] 52 R [epson2] buf[9] 2c , [epson2] buf[10] 01 . [epson2] buf[11] 52 R [epson2] buf[12] 58 X [epson2] buf[13] 02 . [epson2] buf[14] 41 A [epson2] buf[15] ec . [epson2] buf[16] 13 . [epson2] buf[17] 6c l [epson2] buf[18] 1b . [epson2] e2_set_cmd_level: D7 [epson2] e2_add_resolution: add (dpi): 75 [epson2] e2_add_resolution: add (dpi): 150 [epson2] e2_add_resolution: add (dpi): 300 [epson2] e2_add_resolution: add (dpi): 600 [epson2] maximum scan area: 5100x7020 [epson2] e2_set_fbf_area: 0.000000,0.000000 215.899994,297.179993 600 [mm] [epson2] esci_request_status [epson2] e2_send: size = 2, reply = 4 [epson2] e2_send: ESC F [epson2] buf[0] 1b . [epson2] buf[1] 46 F [epson2] e2_send: cmd count, r = 3, w = 3 [epson2] e2_recv: size = 4, buf = 0x7fa4730c [epson2] e2_recv: cmd count, r = 4, w = 3 [epson2] buf[0] 02 . [epson2] buf[1] 02 . [epson2] buf[2] 00 . [epson2] buf[3] 00 . [epson2] status: 02 [epson2] ready [epson2] no option equipment installed [epson2] support extended commands [epson2] detection with request_extended_status [epson2] esci_request_extended_status [epson2] e2_cmd_info_block, params len = 2, reply len = 42, buf = 0x7fa47344 [epson2] e2_send: size = 2, reply = 46 [epson2] e2_send: ESC f [epson2] buf[0] 1b . [epson2] buf[1] 66 f [epson2] e2_send: cmd count, r = 4, w = 4 [epson2] e2_recv: size = 4, buf = 0x7fa472b4 [epson2] e2_recv: cmd count, r = 5, w = 4 [epson2] buf[0] 02 . [epson2] buf[1] 02 . [epson2] buf[2] 2a * [epson2] buf[3] 00 . [epson2] e2_recv_info_block: payload length: 42 [epson2] e2_recv: size = 42, buf = 0x421a00 [epson2] e2_recv: cmd count, r = 6, w = 4 [epson2] buf[0] 00 . [epson2] buf[1] 00 . [epson2] buf[2] 00 . [epson2] buf[3] 00 . [epson2] buf[4] 00 . [epson2] buf[5] 00 . [epson2] buf[6] 00 . [epson2] buf[7] 00 . [epson2] buf[8] 00 . [epson2] buf[9] 00 . [epson2] buf[10] 00 . [epson2] buf[11] c0 . [epson2] buf[12] ec . [epson2] buf[13] 13 . [epson2] buf[14] 6c l [epson2] buf[15] 1b . [epson2] buf[16] 00 . [epson2] buf[17] 00 . [epson2] buf[18] 00 . [epson2] buf[19] 00 . [epson2] buf[20] 00 . [epson2] buf[21] 00 . [epson2] buf[22] 00 . [epson2] buf[23] 00 . [epson2] buf[24] 00 . [epson2] buf[25] 00 . [epson2] buf[26] 43 C [epson2] buf[27] 58 X [epson2] buf[28] 33 3 [epson2] buf[29] 38 8 [epson2] buf[30] 30 0 [epson2] buf[31] 30 0 [epson2] buf[32] 20 [epson2] buf[33] 20 [epson2] buf[34] 20 [epson2] buf[35] 20 [epson2] buf[36] 20 [epson2] buf[37] 20 [epson2] buf[38] 20 [epson2] buf[39] 20 [epson2] buf[40] 20 [epson2] buf[41] 20 [epson2] main = 00, ADF = 00, TPU = 00, main 2 = c0 [epson2] e2_set_model: model is 'CX3800' [epson2] e2_set_fbf_area: 0.000000,0.000000 215.899994,297.179993 600 [mm] [epson2] no command available to detect capabilities [epson2] esci_request_identity2 [epson2] e2_cmd_info_block, params len = 2, reply len = 0, buf = 0x7fa47388 [epson2] e2_send: size = 2, reply = 0 [epson2] e2_send: ESC i [epson2] buf[0] 1b . [epson2] buf[1] 69 i [epson2] e2_send: cmd count, r = 6, w = 5 [epson2] e2_recv: size = 4, buf = 0x7fa472c4 [epson2] e2_recv: cmd count, r = 7, w = 5 [epson2] buf[0] 02 . [epson2] buf[1] 02 . [epson2] buf[2] 36 6 [epson2] buf[3] 00 . [epson2] e2_recv_info_block: payload length: 54 [epson2] e2_recv: size = 54, buf = 0x421a30 [epson2] e2_recv: cmd count, r = 8, w = 5 [epson2] buf[0] 58 X [epson2] buf[1] 02 . [epson2] buf[2] 55 U [epson2] buf[3] 00 . [epson2] buf[4] 00 . [epson2] buf[5] 00 . [epson2] buf[6] 00 . [epson2] buf[7] 00 . [epson2] buf[8] 00 . [epson2] buf[9] 00 . [epson2] buf[10] 00 . [epson2] buf[11] 00 . [epson2] buf[12] 00 . [epson2] buf[13] 00 . [epson2] buf[14] 32 2 [epson2] buf[15] 00 . [epson2] buf[16] 4b K [epson2] buf[17] 00 . [epson2] buf[18] 64 d [epson2] buf[19] 00 . [epson2] buf[20] 96 . [epson2] buf[21] 00 . [epson2] buf[22] c8 . [epson2] buf[23] 00 . [epson2] buf[24] 2c , [epson2] buf[25] 01 . [epson2] buf[26] 90 . [epson2] buf[27] 01 . [epson2] buf[28] 58 X [epson2] buf[29] 02 . [epson2] buf[30] 00 . [epson2] buf[31] 00 . [epson2] buf[32] 32 2 [epson2] buf[33] 00 . [epson2] buf[34] 4b K [epson2] buf[35] 00 . [epson2] buf[36] 64 d [epson2] buf[37] 00 . [epson2] buf[38] 96 . [epson2] buf[39] 00 . [epson2] buf[40] c8 . [epson2] buf[41] 00 . [epson2] buf[42] 2c , [epson2] buf[43] 01 . [epson2] buf[44] 90 . [epson2] buf[45] 01 . [epson2] buf[46] 58 X [epson2] buf[47] 02 . [epson2] buf[48] 20 [epson2] buf[49] 03 . [epson2] buf[50] b0 . [epson2] buf[51] 04 . [epson2] buf[52] 00 . [epson2] buf[53] 00 . [epson2] discovering max depth, NAKs are expected [epson2] e2_esc_cmd: cmd = 0x44, val = 16 [epson2] e2_cmd_simple: size = 2 [epson2] e2_send: size = 2, reply = 1 [epson2] e2_send: ESC D [epson2] buf[0] 1b . [epson2] buf[1] 44 D [epson2] e2_send: cmd count, r = 8, w = 6 [epson2] e2_recv: size = 1, buf = 0x7fa47308 [epson2] e2_recv: cmd count, r = 9, w = 6 [epson2] buf[0] 06 . [epson2] e2_cmd_simple: size = 1 [epson2] e2_send: size = 1, reply = 1 [epson2] buf[0] 10 . [epson2] e2_send: cmd count, r = 9, w = 7 [epson2] e2_recv: size = 1, buf = 0x7fa47308 [epson2] e2_recv: cmd count, r = 10, w = 7 [epson2] buf[0] 15 . [epson2] e2_cmd_simple: NAK [epson2] e2_esc_cmd: cmd = 0x44, val = 14 [epson2] e2_cmd_simple: size = 2 [epson2] e2_send: size = 2, reply = 1 [epson2] e2_send: ESC D [epson2] buf[0] 1b . [epson2] buf[1] 44 D [epson2] e2_send: cmd count, r = 10, w = 8 [epson2] e2_recv: size = 1, buf = 0x7fa47308 [epson2] e2_recv: cmd count, r = 11, w = 8 [epson2] buf[0] 06 . [epson2] e2_cmd_simple: size = 1 [epson2] e2_send: size = 1, reply = 1 [epson2] buf[0] 0e . [epson2] e2_send: cmd count, r = 11, w = 9 [epson2] e2_recv: size = 1, buf = 0x7fa47308 [epson2] e2_recv: cmd count, r = 12, w = 9 [epson2] buf[0] 15 . [epson2] e2_cmd_simple: NAK [epson2] e2_esc_cmd: cmd = 0x44, val = 12 [epson2] e2_cmd_simple: size = 2 [epson2] e2_send: size = 2, reply = 1 [epson2] e2_send: ESC D [epson2] buf[0] 1b . [epson2] buf[1] 44 D [epson2] e2_send: cmd count, r = 12, w = 10 [epson2] e2_recv: size = 1, buf = 0x7fa47308 [epson2] e2_recv: cmd count, r = 13, w = 10 [epson2] buf[0] 06 . [epson2] e2_cmd_simple: size = 1 [epson2] e2_send: size = 1, reply = 1 [epson2] buf[0] 0c . [epson2] e2_send: cmd count, r = 13, w = 11 [epson2] e2_recv: size = 1, buf = 0x7fa47308 [epson2] e2_recv: cmd count, r = 14, w = 11 [epson2] buf[0] 15 . [epson2] e2_cmd_simple: NAK [epson2] maximum supported color depth: 8 [epson2] esci_request_focus_position [epson2] setting focus is not supported [epson2] esci_request_scanner_status [epson2] e2_send: size = 2, reply = 16 [epson2] e2_send: FS F [epson2] buf[0] 1c . [epson2] buf[1] 46 F [epson2] e2_send: cmd count, r = 14, w = 12 [epson2] e2_recv: size = 16, buf = 0x7fa4738c [epson2] e2_recv: cmd count, r = 15, w = 12 [epson2] buf[0] 01 . [epson2] buf[1] 00 . [epson2] buf[2] 00 . [epson2] buf[3] c0 . [epson2] buf[4] 00 . [epson2] buf[5] 00 . [epson2] buf[6] 00 . [epson2] buf[7] 00 . [epson2] buf[8] 00 . [epson2] buf[9] 00 . [epson2] buf[10] 00 . [epson2] buf[11] 00 . [epson2] buf[12] 00 . [epson2] buf[13] 00 . [epson2] buf[14] 00 . [epson2] buf[15] 00 . [epson2] global status : 0x01 [epson2] warmup can be cancelled [epson2] adf status : 0x00 [epson2] not installed [epson2] not enabled [epson2] tpu status : 0x00 [epson2] not installed [epson2] not enabled [epson2] device type : 0xc0 [epson2] main body status: 0x00 [epson2] e2_dev_post_init [epson2] CCT model id is 0x57, profile offset 39 [epson2] esci_reset [epson2] e2_cmd_simple: size = 2 [epson2] e2_send: size = 2, reply = 1 [epson2] e2_send: ESC @ [epson2] buf[0] 1b . [epson2] buf[1] 40 @ [epson2] e2_send: cmd count, r = 15, w = 13 [epson2] e2_recv: size = 1, buf = 0x7fa473c0 [epson2] e2_recv: cmd count, r = 16, w = 13 [epson2] buf[0] 06 . [epson2] scanner model: CX3800 [epson2] close_scanner: fd = 0 [epson2] esci_request_extended_status [epson2] e2_cmd_info_block, params len = 2, reply len = 42, buf = 0x7fa47434 [epson2] e2_send: size = 2, reply = 46 [epson2] e2_send: ESC f [epson2] buf[0] 1b . [epson2] buf[1] 66 f [epson2] e2_send: cmd count, r = 16, w = 14 [epson2] e2_recv: size = 4, buf = 0x7fa473a4 [epson2] e2_recv: cmd count, r = 17, w = 14 [epson2] buf[0] 02 . [epson2] buf[1] 02 . [epson2] buf[2] 2a * [epson2] buf[3] 00 . [epson2] e2_recv_info_block: payload length: 42 [epson2] e2_recv: size = 42, buf = 0x421a00 [epson2] e2_recv: cmd count, r = 18, w = 14 [epson2] buf[0] 00 . [epson2] buf[1] 00 . [epson2] buf[2] 00 . [epson2] buf[3] 00 . [epson2] buf[4] 00 . [epson2] buf[5] 00 . [epson2] buf[6] 00 . [epson2] buf[7] 00 . [epson2] buf[8] 00 . [epson2] buf[9] 00 . [epson2] buf[10] 00 . [epson2] buf[11] c0 . [epson2] buf[12] ec . [epson2] buf[13] 13 . [epson2] buf[14] 6c l [epson2] buf[15] 1b . [epson2] buf[16] 00 . [epson2] buf[17] 00 . [epson2] buf[18] 00 . [epson2] buf[19] 00 . [epson2] buf[20] 00 . [epson2] buf[21] 00 . [epson2] buf[22] 00 . [epson2] buf[23] 00 . [epson2] buf[24] 00 . [epson2] buf[25] 00 . [epson2] buf[26] 43 C [epson2] buf[27] 58 X [epson2] buf[28] 33 3 [epson2] buf[29] 38 8 [epson2] buf[30] 30 0 [epson2] buf[31] 30 0 [epson2] buf[32] 20 [epson2] buf[33] 20 [epson2] buf[34] 20 [epson2] buf[35] 20 [epson2] buf[36] 20 [epson2] buf[37] 20 [epson2] buf[38] 20 [epson2] buf[39] 20 [epson2] buf[40] 20 [epson2] buf[41] 20 [epson2] main = 00, ADF = 00, TPU = 00, main 2 = c0 [epson2] attach_one_config: len = 17, line = net autodiscovery [epson2] e2_network_discovery, sent discovery packet [epson2] e2_network_discovery, end [epson2] sane_epson2_get_devices - results: [epson2] 0 (3): CX3800 [saned] process_request: waiting for request [saned] process_request: got request 2 [saned] process_request: access to resource `epson2' granted [epson2] sane_epson2_open: name = libusb:001:010 [epson2] handle obtained [epson2] open_scanner: libusb:001:010 [epson2] scanner opened [epson2] esci_reset [epson2] e2_cmd_simple: size = 2 [epson2] e2_send: size = 2, reply = 1 [epson2] e2_send: ESC @ [epson2] buf[0] 1b . [epson2] buf[1] 40 @ [epson2] e2_send: cmd count, r = 18, w = 15 [epson2] e2_txrx: tx err, Error during device I/O [epson2] e2_cmd_simple: failed, Error during device I/O [epson2] close_scanner: fd = 0 [epson2] esci_request_extended_status [epson2] e2_cmd_info_block, params len = 2, reply len = 42, buf = 0x7fa4863c [epson2] e2_send: size = 2, reply = 46 [epson2] e2_send: ESC f [epson2] buf[0] 1b . [epson2] buf[1] 66 f [epson2] e2_send: cmd count, r = 18, w = 16 [epson2] e2_cmd_info_block: failed, Error during device I/O [saned] process_request: sane_open returned: Error during device I/O [saned] process_request: waiting for request [saned] process_request: got request 10 [saned] bailing out, waiting for children... [saned] bail_out: all children exited root at fritz:/var/mod/root# SANE_DEBUG_EPSON2=128 saned -d128 [saned] main: starting debug mode (level 128) [saned] read_config: searching for config file [saned] read_config: done reading config [saned] saned (AF-indep+IPv6) from sane-backends 1.0.21 starting up [saned] do_bindings: trying to get port for service "sane-port" (getaddrinfo) [saned] do_bindings: " sane-port " service unknown on your host; you should add [saned] do_bindings: sane-port 6566/tcp saned # SANE network scanner daemon [saned] do_bindings: to your /etc/services file (or equivalent). Proceeding anyway. [saned] do_bindings: [0] socket () using IPv6 [saned] do_bindings: [0] setsockopt () [saned] do_bindings: [0] bind () to port 6566 [saned] do_bindings: [0] listen () [saned] do_bindings: [1] socket () using IPv4 [saned] do_bindings: [1] setsockopt () [saned] do_bindings: [1] bind () to port 6566 [saned] do_bindings: [1] bind failed: Address already in use [saned] run_standalone: waiting for control connection [saned] handle_connection: processing client connection [saned] check_host: detected an IPv4-mapped address [saned] check_host: access by remote host: ::ffff:192.168.1.8 [saned] check_host: remote host is not IN_LOOPBACK nor IN6_LOOPBACK [saned] check_host: local hostname: fritz.fonwlan.box [saned] check_host: local hostname(s) (from DNS): fritz.box [saned] check_host: local hostname(s) (from DNS): fritz.box [saned] check_host: local hostname(s) (from DNS): fritz.box [saned] check_host: remote host doesn't have same addr as local [saned] check_host: opening config file: /etc/hosts.equiv [saned] check_host: can't open config file: /etc/hosts.equiv (No such file or directory) [saned] check_host: opening config file: saned.conf [saned] check_host: config file line: `192.168.1.0/24' [saned] check_host: subnet with base IP = 192.168.1.0, CIDR netmask = 24 [saned] check_host: access granted from IP address 192.168.1.8 (in subnet 192.168.1.0/24) [saned] init: access granted [saned] init: access granted to saned-user@::ffff:192.168.1.8 [saned] process_request: waiting for request [saned] process_request: got request 1 [sanei_debug] Setting debug level of epson2 to 128. [epson2] sane_epson2_init: sane-backends 1.0.21 [epson2] epson2 backend, version 1.0.124 [epson2] sane_epson2_get_devices [epson2] probe_devices [epson2] free_devices [epson2] attach_one_config: len = 10, line = scsi EPSON [epson2] attach_one_config: len = 3, line = usb [epson2] attach_one_usb: dev = libusb:001:010 [epson2] attach: devname = libusb:001:010, type = 3 [epson2] e2_dev_init [epson2] open_scanner: libusb:001:010 [epson2] scanner opened [epson2] found valid Epson scanner: 0x4b8/0x818 (vendorID/productID) [epson2] e2_set_model: model is 'generic' [epson2] esci_reset [epson2] e2_cmd_simple: size = 2 [epson2] e2_send: size = 2, reply = 1 [epson2] e2_send: ESC @ [epson2] buf[0] 1b . [epson2] buf[1] 40 @ [epson2] e2_send: cmd count, r = 0, w = 1 [epson2] e2_txrx: tx err, Error during device I/O [epson2] e2_cmd_simple: failed, Error during device I/O [epson2] close_scanner: fd = 0 [epson2] esci_request_extended_status [epson2] e2_cmd_info_block, params len = 2, reply len = 42, buf = 0x7faf23c4 [epson2] e2_send: size = 2, reply = 46 [epson2] e2_send: ESC f [epson2] buf[0] 1b . [epson2] buf[1] 66 f [epson2] e2_send: cmd count, r = 0, w = 2 [epson2] e2_cmd_info_block: failed, Error during device I/O [epson2] attach_one_config: len = 17, line = net autodiscovery [epson2] e2_network_discovery, sent discovery packet [epson2] e2_network_discovery, end [epson2] sane_epson2_get_devices - results: [saned] process_request: waiting for request [saned] process_request: got request 10 [saned] bailing out, waiting for children... [saned] bail_out: all children exited The system: uname -a Linux fritz.fonwlan.box 2.6.19.2 #1 Tue Jan 18 13:10:25 CET 2011 mips GNU/Linux Ram: 60636 kB , there is 8236 kB free Actually there is just the Epson connectet to the Box-USB The Printer-Part allways works fine, but just without info about ink etc Hope, someone can help Thanks, Greetz, Christoph -- GPG-Fingerprint: 171A 6F66 52E5 A6CE D664 2427 832F E711 7442 8261 -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 198 bytes Desc: This is a digitally signed message part. URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20110120/7e7a438b/attachment-0001.pgp>