If it's not on our list, we don't know about it. Looks physically similar to the N6010?
allan On Mon, Mar 21, 2011 at 12:45 PM, Stephen Peters <steve-sane-devel at killbygayford.co.uk> wrote: > Hello, > > I have an HP Scanjet 5000 Sheet-feed Scanner (L2715A) which does not seem to > be supported yet according to the sane page here: > http://www.sane-project.org/lists/sane-mfgs-cvs.html. > > I am trying to use it with Debian Squeeze. Is this scanner really not > supported or is Debian not fully up to date with current scanner backends? > > Thanks in advance for your help, > > Stephen. > > PS here is some hopefully informative output about this device: > > Output from "lsusb" > Bus 001 Device 007: ID 03f0:2e05 Hewlett-Packard > > Output from "sane-find-scanner -v -v" > > This is sane-find-scanner from sane-backends 1.0.21 > > ?# sane-find-scanner will now attempt to detect your scanner. If the > ?# result is different from what you expected, first make sure your > ?# scanner is powered up and properly connected to your computer. > > <snip> > > trying libusb: > > <device descriptor of 0x03f0/0x2e05 at 001:006 (Language Error Language > Error)> > bLength ? ? ? ? ? ? ? 18 > bDescriptorType ? ? ? 1 > bcdUSB ? ? ? ? ? ? ? ?2.00 > bDeviceClass ? ? ? ? ?0 > bDeviceSubClass ? ? ? 0 > bDeviceProtocol ? ? ? 0 > bMaxPacketSize0 ? ? ? 64 > idVendor ? ? ? ? ? ? ?0x03F0 > idProduct ? ? ? ? ? ? 0x2E05 > bcdDevice ? ? ? ? ? ? 0.01 > iManufacturer ? ? ? ? 1 (Language Error) > iProduct ? ? ? ? ? ? ?2 (Language Error) > iSerialNumber ? ? ? ? 3 (Language Error) > bNumConfigurations ? ?1 > ?<configuration 0> > ?bLength ? ? ? ? ? ? ?9 > ?bDescriptorType ? ? ?2 > ?wTotalLength ? ? ? ? 39 > ?bNumInterfaces ? ? ? 1 > ?bConfigurationValue ?1 > ?iConfiguration ? ? ? 0 () > ?bmAttributes ? ? ? ? 192 (Self-powered) > ?MaxPower ? ? ? ? ? ? 4 mA > ?<interface 0> > ? <altsetting 0> > ? bLength ? ? ? ? ? ?9 > ? bDescriptorType ? ?4 > ? bInterfaceNumber ? 0 > ? bAlternateSetting ?0 > ? bNumEndpoints ? ? ?3 > ? bInterfaceClass ? ?255 > ? bInterfaceSubClass 255 > ? bInterfaceProtocol 255 > ? iInterface ? ? ? ? 5 (Language Error) > ? ?<endpoint 0> > ? ?bLength ? ? ? ? ? 7 > ? ?bDescriptorType ? 5 > ? ?bEndpointAddress ?0x82 (in 0x02) > ? ?bmAttributes ? ? ?2 (bulk) > ? ?wMaxPacketSize ? ?512 > ? ?bInterval ? ? ? ? 0 ms > ? ?bRefresh ? ? ? ? ?0 > ? ?bSynchAddress ? ? 0 > ? ?<endpoint 1> > ? ?bLength ? ? ? ? ? 7 > ? ?bDescriptorType ? 5 > ? ?bEndpointAddress ?0x02 (out 0x02) > ? ?bmAttributes ? ? ?2 (bulk) > ? ?wMaxPacketSize ? ?512 > ? ?bInterval ? ? ? ? 0 ms > ? ?bRefresh ? ? ? ? ?0 > ? ?bSynchAddress ? ? 0 > ? ?<endpoint 2> > ? ?bLength ? ? ? ? ? 7 > ? ?bDescriptorType ? 5 > ? ?bEndpointAddress ?0x81 (in 0x01) > ? ?bmAttributes ? ? ?3 (interrupt) > ? ?wMaxPacketSize ? ?64 > ? ?bInterval ? ? ? ? 11 ms > ? ?bRefresh ? ? ? ? ?0 > ? ?bSynchAddress ? ? 0 > > <trying to find out which USB chip is used> > ? ?checking for GT-6801 ... > ? ?this is not a GT-6801 (bDeviceClass = 0) > ? ?checking for GT-6816 ... > ? ?this is not a GT-6816 (bcdUSB = 0x200) > ? ?checking for GT-8911 ... > ? ?this is not a GT-8911 (check 2, bcdUSB = 0x200) > ? ?checking for MA-1017 ... > ? ?this is not a MA-1017 (bDeviceClass = 0, bInterfaceClass = 255) > ? ?checking for MA-1015 ... > ? ?this is not a MA-1015 (bDeviceClass = 0) > ? ?checking for MA-1509 ... > ? ?this is not a MA-1509 (bDeviceClass = 0) > ? ?checking for LM983[1,2,3] ... > ? ?this is not a LM983x (bcdUSB = 0x200) > ? ?checking for GL646 ... > ? ?this is not a GL646 (bDeviceClass = 0, bInterfaceClass = 255) > ? ?checking for GL646_HP ... > ? ?this is not a GL646_HP (bDeviceClass = 0, bInterfaceClass = 255) > ? ?checking for GL660+GL646 ... > ? ?this is not a GL660+GL646 (bDeviceClass = 0, bInterfaceClass = 255) > ? ?checking for GL84x ... > ? ?this is not a GL84x (bDeviceClass = 0, bInterfaceClass = 255) > ? ?checking for ICM532B ... > ? ?this is not a ICM532B (check 1, bDeviceClass = 0, bInterfaceClass = 255) > ? ?checking for PV8630/LM9830 ... > ? ?this is not a PV8630/LM9830 (bcdUSB = 0x200) > ? ?checking for M011 ... > ? ?this is not a M011 (bDeviceClass = 0) > ? ?checking for RTS8822 ... > ? ?this is not a RTS8822 (bEndpointAddress = 0x82, bmAttributes = 0x2, > wMaxPacketSize = 0x200, bInterval = 0x0) > ? ?checking for rts8858c ... > ? ?this is not a rts8858c (bcdUSB = 0x200) > ? ?checking for SQ113 ... > ? ?this is not a SQ113 (bEndpointAddress = 0x82, bmAttributes = 0x2, > wMaxPacketSize = 0x200, bInterval = 0x0) > ? ?checking for HP4500C/4570C/5500C/5550C/5590/7650 chipset ... > ? ?this is not a HP4500C/4570C/5500C/5550C/5590/7650 chipset (bDeviceClass = > 0) > ? ?checking for rts8801/rts8891 ... > ? ?this is not a rts8801/rts8891 (bcdUSB = 0x200) > <Couldn't determine the type of the USB chip (result from sane-backends > 1.0.21)> > > found USB scanner (vendor=0x03f0 [Language Error], product=0x2e05 [Language > Error]) at libusb:001:006 > > <snip> > > The contents of this e-mail, any attachment and response string are > privileged and confidential and intended for the addressee only. Its > contents may not be copied or disclosed to anyone other than the intended > recipient. If this e-mail is received in error, please contact Killby & > Gayford Limited immediately with details of the sender and addressee and > delete the e-mail. Internet communications are not secure and therefore > Killby & Gayford Limited does not accept legal responsibility for the > contents of this message as it has been transmitted over a public network. > Killby & Gayford Limited is a private limited company registered in England > with registration number 628491 and its registered office at 171E Wingate > Square, London SW4 0AN. > > Please consider the environment before printing this message or its > contents. > > > -- > sane-devel mailing list: sane-devel at lists.alioth.debian.org > http://lists.alioth.debian.org/mailman/listinfo/sane-devel > Unsubscribe: Send mail with subject "unsubscribe your_password" > ? ? ? ? ? ?to sane-devel-request at lists.alioth.debian.org > -- "The truth is an offense, but not a sin"
