CSI, Epson GT-30000 backend epson. A Epson 1640 via USB works New box is a HP DL580G3, 4 CPUs, 24 GB RAM, and both a LSI and Adatec SCSI-320 cards.
In testing ive even moved Adpatec 2940UW and cable from the PC with FC11 to the Server with FC15 Attached is the output from the epson backend FC11's sane sane-backends-1.0.20-11.fc11.x86_64 libsane-hpaio-3.10.2-4.fc11.x86_64 sane-backends-libs-1.0.20-11.fc11.x86_64 xsane-0.997-1.fc11.x86_64 FC15's sane-backends-1.0.22-3.fc15.x86_64 xsane-gimp-0.998-3.fc15.x86_64 libsane-hpaio-3.11.5-2.fc15.x86_64 xsane-0.998-3.fc15.x86_64 xsane-common-0.998-3.fc15.x86_64 sane-backends-libs-1.0.22-3.fc15.x86_64 first issue is there is no scanner in /etc/group (not in 11 either, I'll hit fedora on that) kernel finds the scanner [ 2.246018] scsi4 : ioc0: LSI53C1030 B2, FwRev=01013c00h, Ports=1, MaxQ=255, IRQ=74 [ 2.804838] scsi 4:0:1:0: Processor EPSON SCANNER GT-30000 1.53 PQ: 0 ANSI: 2 [ 2.804870] scsi target4:0:1: Beginning Domain Validation [ 2.830787] scsi target4:0:1: Domain Validation skipping write tests [ 2.830793] scsi target4:0:1: Ending Domain Validation [ 2.830870] scsi target4:0:1: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 127) [another issue but not sane] [ 6.086769] scsi 4:0:1:0: Attached scsi generic sg1 type 3 it is the only device on the card crw-------. 1 root root 21, 1 May 30 07:40 /dev/sg1 there is no scanner device, and mode is 600 not 660, not sane but just wanted to mention it changing the mode to 660 scanimage -L returns device `epson2:/dev/sg1' is a Epson SCANNER GT-30000 flatbed scanner epson2 is the same backend the FC11 PC used scanimage --help -d epson2:/dev/sg1' Options specific to device `epson2:/dev/sg1': Scan Mode: --mode Lineart|Gray|Color [Lineart] Selects the scan mode (e.g., lineart, monochrome, or color). --depth 8 [inactive] Number of bits per sample, typical values are 1 for "line-art" and 8 for multibit scans. --halftoning None|Halftone A (Hard Tone)|Halftone B (Soft Tone)|Halftone C (Net Screen)|Dither A (4x4 Bayer)|Dither B (4x4 Spiral)|Dither C (4x4 Net Screen)|Dither D (8x4 Net Screen)|Text Enhanced Technology|Download pattern A|Download pattern B [Halftone A (Hard Tone)] Selects the halftone. --dropout None|Red|Green|Blue [None] Selects the dropout. --brightness -4..3 [0] Selects the brightness. --sharpness -2..2 [0] --gamma-correction Default|User defined|High density printing|Low density printing|High contrast printing [Default] Selects the gamma correction value from a list of pre-defined devices or the user defined table, which can be downloaded to the scanner --color-correction None|Built in CCT profile|User defined CCT profile [Built in CCT profile] Sets the color correction table for the selected output device. --resolution 50|60|72|75|80|90|100|120|133|144|150|160|175|180|200|216|240|266|300|320|350|360|400|480|600|720|800|900|1200|1600|1800|2400|4800|9600dpi [25] |1200|1600|1800|2400|4800|9600dpi [25] Sets the resolution of the scanned image. --threshold 0..255 [128] Select minimum-brightness to get a white point Advanced: --mirror[=(yes|no)] [no] Mirror the image. --auto-area-segmentation[=(yes|no)] [yes] Enables different dithering modes in image and text areas --red-gamma-table 0..255,... [inactive] Gamma-correction table for the red band. --green-gamma-table 0..255,... [inactive] Gamma-correction table for the green band. --blue-gamma-table 0..255,... [inactive] Gamma-correction table for the blue band. --wait-for-button[=(yes|no)] [no] After sending the scan command, wait until the button on the scanner is pressed to actually start the scan process. Color correction: --cct-type Automatic|Reflective|Colour negatives|Monochrome negatives|Colour positives [inactive] Color correction profile type --cct-profile -2..2,... Color correction profile data Preview: --preview[=(yes|no)] [no] Request a preview-quality scan. Geometry: -l 0..297.18mm [0] Top-left x position of scan area. -t 0..431.8mm [0] Top-left y position of scan area. -x 0..297.18mm [297.18] Width of scan-area. -y 0..431.8mm [431.8] Height of scan-area. Optional equipment: --source Flatbed|Automatic Document Feeder [Flatbed] Selects the scan source (such as a document-feeder). --auto-eject[=(yes|no)] [no] Eject document after scanning --film-type Positive Film|Negative Film|Positive Slide|Negative Slide [inactive] --focus-position Focus on glass|Focus 2.5mm above glass [inactive] Sets the focus position to either the glass or 2.5mm above the glass --bay 1|2|3|4|5|6 [inactive] Select bay to scan --eject [] Eject the sheet in the ADF --adf-mode Simplex|Duplex [inactive] Selects the ADF mode (simplex/duplex) no surprises lets try to get a no-option image # time scanimage > /tmp/image.pnm [epson2] e2_ext_read: cancel request received scanimage: sane_read: Operation was cancelled real 0m5.628s at least it thought about it ok now lets set SANE_DEBUG_EPSON2 to 1 # scanimage > /dev/null [sanei_debug] Setting debug level of epson2 to 1. [epson2] epson2 backend, version 1.0.124 [epson2] inquiry data: [epson2] vendor : EPSON [epson2] model : SCANNER GT-30000 [epson2] revision: 1.53 [epson2] e2_set_cmd_level: B7 [epson2] maximum scan area: 28080x40800 [epson2] status: 12 [epson2] ready [epson2] option equipment is installed [epson2] support extended commands [epson2] detection with request_extended_identity [epson2] command level : B7 [epson2] basic resolution: 600 [epson2] min resolution : 25 [epson2] max resolution : 9600 [epson2] max pixel num : 32752 [epson2] scan area : 7020x10200 [epson2] adf area : 7020x10200 [epson2] tpu area : 0x0 [epson2] capabilities (1): 0x39 [epson2] capabilities (2): 0x00 [epson2] input depth : 12 [epson2] max output depth: 8 [epson2] rom version : 1.53 [epson2] model name : SCANNER GT-30000 [epson2] options: [epson2] ADF detected [epson2] capabilities (1): [epson2] page type ADF is installed [epson2] ADF is duplex capable [epson2] page type ADF loads from the first sheet [epson2] push button is supported [epson2] e2_set_cmd_level: B7 [epson2] maximum supported color depth: 8 [epson2] setting focus is not supported [epson2] global status : 0x00 [epson2] adf status : 0x80 [epson2] tpu status : 0x00 [epson2] device type : 0xc0 [epson2] main body status: 0x00 [epson2] CCT model id is 0x00, profile offset 0 [epson2] integrating resolution list (4800-9600) [epson2] scanner model: SCANNER GT-30000 [epson2] 0 (1): SCANNER GT-30000 [epson2] handle obtained [epson2] e2_init_parameters: resolution = 25, preview = 0 [epson2] e2_init_parameters: 0x25cc590 0x25ccdc0 tlx 0.000000 tly 0.000000 brx 297.179993 bry 431.799988 [mm] [epson2] max req size: 131072, line count: 3640 [epson2] final line count is 255 [epson2] e2_set_extended_scanning_parameters [epson2] using built in CCT profile [epson2] specific profile not available, using default [epson2] global status : 0x00 [epson2] adf status : 0x80 [epson2] tpu status : 0x00 [epson2] device type : 0xc0 [epson2] main body status: 0x00 [epson2] sane_epson2_start: scanning... [epson2] adjusted block count: 2 [epson2] e2_ext_read: cancel request received [epson2] e2_cancel scanimage: sane_read: Operation was cancelled stderr attached as a gzip'ed file, stdout as image.pnm -pete Need to move this thing in to a different room !!! -------------- next part -------------- A non-text attachment was scrubbed... Name: image.pnm Type: image/x-portable-anymap Size: 30 bytes Desc: not available URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20110530/e35ab06d/attachment-0001.pnm> -------------- next part -------------- A non-text attachment was scrubbed... Name: stderr128.gz Type: application/x-gzip Size: 35446 bytes Desc: not available URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20110530/e35ab06d/attachment-0001.bin>